Top Timber Lag Bolts

Venzo Bike Bicycle Bench Mount Clamp Repair Rack Stand Work Stand - Bike Maintenance

  • BENCH MOUNT: Bike repair stand mounted on a bench is more stable than portable and foldable repair stand. It can handle harsh bike mechanic or....
  • FULL METAL: The workstand is made of heavy duty steel except rubber protection coating. No more broken parts! With it's 360 degree turning and side....
  • MOUNTING HOLES: Mounting flange has four predrilled holes, allowing use of bolts or lag bolts to mount ( Mounting bolts not included )..
  • DURABLE: We understand what kind of workstand riders need. The quick release & bolts are both heat treated and approved not to be stripped anytime.....
  • ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide a life time warranty ! Made in Taiwan..
Check Stock

LaBear 3/8\ Drive to 1/4\ Hex Drive Quick Change Impact Adapter (3/8\DR to 1/4\H)

  • Fits: 1/2” Lag bolts (Hard Heads), 5/8”, 3/4”, & 1/2” square headed bolts and nuts.
  • Handle Type: Non-conductive and Lightweight.
Check Stock

#17 x 6 Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - 100 Screw Count

  • Screw Dimensions - ~5/16" Thread Diameter - 11/16" Head Diameter - Length 6".
  • Manufactured from High Quality Heat Treated Steel, Triple Coated, ACQ Treated Lumber Compatible.
  • Corrosion Resistant Lag Screws Passed the 1200 Hour Salt Spray Test Without Coating Failures.
  • Type 17 Notched Extra Sharp Point for Quick Starts without "Walking", Reduces Need for Pre-Drilling.
  • Construction Lag Screws Far Exceed Standard Lag Bolts in Sear Compression Forces.
Check Stock

Kanto PX720 Articulating Full Motion TV Wall Mount for 42-inch to 100-inch TVs | Black

  • FULL MOTION DESIGN - Heavy-duty articulating arms allow you to safely extend your TV 31" from the wall and swivel it up to 90° in either direction, depending on screen size. Maintain a perfect viewing angle wherever you’re seated..
  • TOOLLESS TILT - An easy-to-use, toolless tilt mechanism allows you to angle your TV up to 15° forward or 3° backward in order to reduce glare and improve line-of-sight when mounting above eye-level. The tilt head can be tensioned to allow for on-the-fly adjustments or to lock your TV in place at the desired angle..
  • HASSLE-FREE INSTALLATION - Use the provided drill template to accurately mount your TV to brick, concrete or wood studs up to 24" apart. A carefully organized hardware box is also included with all the lag bolts, anchors, washers and spacers you’ll need for a custom fit installation..
  • SAFETY FIRST - The PX720's high-grade steel construction and heavy-duty lag bolts safely support 150 lb., even at full extension. Mount up to a 100" TV without hesitation..
  • CLEAN SETUP - In addition to providing a low-profile solution for displaying your TV, the PX720 comes with wall plate covers and cable management raceways to ensure your viewing area remains tidy..
Check Stock

5 Steps Outdoor Hand Rails for Steps, Black Wrought Iron Handrail Kit

  • Railings for Outdoor Steps- This Iron Stair rail is designed to be a hand rail outdoor (also great replacement for wooden handrails)..
  • DIY Iron Handrail- Designed to be installed yourself!.
  • Versitle Installation- Can be used as outside hand railing, outdoor handrails, stair rails, hand rails for stairways, front porch hand rail (we provide flat mount bracket for free), etc.
  • Parts Included- Anchor bolts, lag screws, masonry drill bit & hex screw bit (some 2021 inventory in warehouse has older gold version anchors and no lag screws. Contact us for free hardware replacement if needed..
  • NOTE: For sale is a 5.5 feet railing (Intended for 4-5 steps).
Check Stock

Pirhosigma 6 pcs Bolts Fasteners Knives Rivets Lock Stainless Steel Handle Fastener Pin Screws Handle Studs

  • For internal and external Timber or Composite doors.
Check Stock

Besthouse Permanent Antirust Stainless Steel 304 Heavy Duty Swing Hangers 1000LB Capacity, Silent Swing Hook 360° Rotation, 4 Screws for Concrete and Wooden, Yoga Hammock Chair Sandbag, Swing Sets

  • QUIET AND SMOOTH:Custom silent nylon bushing specially designed to prevent metal rub creating a quiet.The innovative design of the lubrication system makes the hardware swing smoother and it is very convenient to add lubricants.Maintain long-term smoothness and stability..
  • OUTDOOR USE:Perfect for hammock chairs swing, porch swings, swinging chairs, punching bags, or hanging any other heavy object of an overhead mount..
  • CORROSION RESISTANCE,HIGH HARDNESS:304 stainless steel rings made of high quality raw materials.No rust,corrosion resistance, high hardness, non-toxic and pollution-free environment.Suitable for any scene..
  • EASY TO INSTALL:We’ve pre-drilled two holes for bolting to wooden beams or concrete.Includes 2 concrete anchor and 2 hex lag bolts,and a unique one piece design and can be installed in minutes..
  • WHAT YOU GET:Swing hanger with 2 concrete anchor and 2 hex lag bolts,our 30-DAY MONEY-BACK guarantee for any reason and friendly helpful customer service..
Check Stock

Safe Kidz Heavy Duty Swing Hangers :: Set of 2 Playset Hangers for Wooden Swing Sets :: Complete Kit Includes Mounting Hardware, Snap Hooks & Properly Sized Drill Bit for EZ Installation

  • Stronger, Sturdier, Safer: 2,400 pounds capacity. Count on these cast-iron swing hangers to support your kids safely & securely. They're exactly the same kind used on premium swing sets that sell for thousands of dollars.
  • Complete & Ready to Install: No need to dash to the hardware store. This swing hanger kit comes with everything you'll need – lag bolts, washers, snap clips, even a perfectly sized drill bit..
  • Bearings That Last a Lifetime: Why settle for cheap plastic or nylon bushings that often wear out fast? Safe-Kidz outdoor swing hangers feature better bronze bushings for smooth gliding & lasting wear..
  • Resistant to Corrosion: All the lag bolts in your swing hanger set are Dacromet-coated, not plated. So, you can safely install them in treated lumber without risk of rust or rot..
  • Full & Detailed Instructions: Your Safe-Kidz Swing Hangers come with step-by-step directions for easy, secure installation. We even provide the official ASTM guidelines for proper safety procedure..
Check Stock

Steel DN Mate 60 Pack T316 Stainless Steel Left&Right Handed Thread Swage Lag Screws for Wood Post of 1/8' Deck Railing Kit, Cable Railing/Stair Deck Railing, DIY Hardware Kit, Wrench Included DM60

  • ...s, 1 patent design wrench, and 2 drill bits. Stainless Steel T316 material, anti-rust ,water and corrosion, marine Grade, good for indoor or outdoor usage. With our new made wrench, installation becomes much easier..
  • This deck railing hardware fit 1/8″ OD cable of railing system. The thread screws are designed for timber/wood post. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Products without Left & right will bring you hassle and might damage the cable..
  • Length of cable should be 1-1/2″ shorter than wood surface distance（as shown in pic.4).
  • if you want to DIY a high quality cable railing system, standard 1/8″ (OD) cable which was made of T316-stainless steel is recommended. Please search on amazon” B0B71J2DXD” if you need black lag screws..
  • By the design of Right&left handed thread, of course it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system. And this cable railing won’t be easily unfixed or destroyeded..
  • The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle or tensioner. Deck and Stair Cable railing system is not only simple but also won’t block your view. We offer free desig....
Check Stock

#8-32 X 7/8'' Stainless Phillips Oval Head Machine Screw, (100 pc), 18-8 (304) Stainless Steel, by Bolt Dropper

  • OUR PROFESSIONAL HEX LEG BOLT are often located in a position that makes bolt kit susceptible to corrosion and therefore is an obvious choice both in terms of weight saving, appearance, and performance..
  • FANTASTIC CORROSION RESISTANCE. Fasteners kit is used widely in the home and office appliance, communication equipment and other machinery industry..
  • WE OFFER A GREAT METRIC HARDWARE ASSORTMENT: Hex Bolts, Machine Screws, wood screws, Carriage Bolts, Lag Bolts, Wood Screws, Sheet Metal Screws. Just select a couple and Add to Cart!.
  • CHOOSE FASTENERS KIT SET FOR GENERAL PURPOSE USE. These bolt assortment intended for both manual and automatic screwing, twisting and tightening with the maximum force developed by any bolt tool..
  • STAINLESS STEEL BOLT SET ARE RELIABLE AND DURABLE and are used in many applications. It is widely used both for private repairs and for fixing parts of large production facilities..
Check Stock

Felled Logging Peavey Log Roller Lifter Attachment - 8in Lifting Log Cutting Stand Fits Log Peavey and Cant Hooks

  • [Create Space for Safe Cutting]: Logging cant hooks, log peaveys, and log puller tools are great for moving trees and timber.
  • But when you need to cut down logs, raise them a full 8 inches (20.3cm) from the ground with the Felled Large Cant Hook Stand.
  • [Fits Your Logging Tools]: Lumberjack log roller tool log jack comes in 2 parts to fit around your lumber cant pole or log peavey heads with 1.75 to 2-inch (4.5 to 5.1cm) diameters.
  • [Grab and Lift Logs in 1 Motion]: Wrap your large log cant hook around your log then use leverage to flip the timber on top of this onto tree cutting equipment tree log grabber lifter tool easily.
  • Turns your large log roller tools into arborist chainsaw mill log stands.
  • [Built to Last]: Steel log pole jack provides a sturdy hold by featuring a 10 inch (25.4cm) long 1.8-inch (4.6cm) diameter base bar.
  • Zinc plating ensures durability and resistance to wear from elements.
  • [Easy Assembly]: Included nuts, bolts, and L wrench make it easy to attach this large timberjack log lifter to your existing tree logging equipment tools.
  • Quick assembly has you cutting and debarking in no time.
Check Stock

Heavy Duty Storage Racks Holds Up To 480lbs by Delta Cycle & Home - Wall Mounted Solution for Garage, Basement or Pantry - Premium Steel & Adjustable Lumbar Rack Organizer - Easy-to-Install

  • Heavy Duty Lumber Storage Rack :: Delta's wall mounted rack is crafted from premium steel with a hammered powdercoat finish. The shelving hardware includes lag bolts and locking pins that bare up to 480 lbs of weight, or 160 lbs per individual shelf..
  • Wood Rack Dimensions & Specifications :: Package includes 2 upright wall racks, 6 arm brackets, 2 rack adapters, and all necessary lag bolts and locking pins. When fully installed, the measurements are 20.5 inches H x 16 inches D x 32 inches W. Wood not included..
  • Designed To Adjust For Your Needs :: Each steel arm is adjustable at 2" height intervals. Joining clips are included to connect an additional rack. Mount anywhere around the home to a stud in the wall..
  • Free Up Valuable Floor Space :: Store excess garage or workshop items such as lumber, paint, and tools. Makes a convenient pantry organizer. Fix up your outdoor shed to store a ladder & bins. Create racks for storage above your washer & dryer..
  • Premium Support In The USA :: We provide personal customer support and respond to all messages and questions in a timely manner. We offer a limited lifetime warranty that covers defects in workmanship and materials..
Check Stock