Top Timing Pulley Holding Tool

Camshaft Pulley Holder Crankshaft Harmonic Damper Pulley Holding Removal Tool Compatible with Toyota Lexus

  • 1X crankshaft damper pulley holding tool.
  • Camshaft Pulley Holder Tool: Used it to held the pulleys when remove camshaft pulleys, have two grooved pins to hold camshaft sprockets stationary to remove the bolts, requivalent OEM W89208, compatible with Toyota, Nissan, Camry, Mazda, OHC and many others, the distance between of two grooved pins is 2.36 inches, so please carelly check the size bedfore order.
  • Crankshaft Damper Pulley Holder Tool: Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on engines. only Compatible with Lexus from 1990: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Compatible with Toyota from 1996 : 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. fit 4 cyl engine : 1983-1995 22RE, 1995-2004 2RZ,1995-2004 3RZ.
  • Worked Well: The camshaft pulley holder tool have enougt depth to lock the camshaft sprocket, make it fixed, and with rubber handle, not hurt your hands, make replace cam shaft gears and seals more easy.
Check Stock

ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES: The ABN 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans.
  • The holder bar keeps the water pump pulley in place while loosening the radiator fan.
  • FITS YOUR VEHICLE: Made to be compatible with BMW engine models M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32, S54.
  • Also compatible with some Ford, GM, and Chevy models.
  • Bar has (3) 13 mm diameter holes and (1) 24x12 mm hole plus (1) 33x11 mm and (1) 38x25 mm half-circle grooves.
  • BUILT TO LAST: Constructed from 0.2-inch (5 mm) thick vanadium steel for maximum strength and longevity.
  • 12.5-inch (31.8 cm) long clutch fan removal tool handles for less user fatigue.
  • EASY TO USE: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.
  • If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the wate....
Check Stock

BEMONOC HTD 3M 60T 15T Belt Width 15mm Timing Pulley Belt Set kit Reduction Ratio 4:1

  • ✔Aluminum Big Pulley: 60 Teeth, bore 12mm.
  • ✔Aluminum Small Pulley: 15 Teeth, bore 8mm.
  • ✔Package: 1pcs * 60T Timing Pulley + 1pcs * 15T iming Pulley + 1pcs 3M Timing Belt width 15mm Timing Belt + 2pcs * Allen Key + 4pcs * setscrews ..
Check Stock

ARES 70074 - 2-Piece Fan Clutch Wrench Set - 32mm Fan Clutch Nut Wrench - Water Pump Holder Removal Tool Kit

  • 【Material】The water pump sprocket retainer is made of high-quality carbon steel. Its high hardness makes it not easy to break and durable. The black anti-oxidation layer on the tool surface can effectively protect the tool and prolong its service life..
  • 【Simple Operation】The full-circle sprocket holding tool has a special design and is easy to operate. Simply remove the access plate from the front cover, and then line up holes on the water pump tool to the sprocket. It can be easily installed regardless of the orientation of the timing chain..
  • 【Application】The water pump retainer tool saves costly loss of timing on fit for GM 2.2L 2.4L Ecotec motors found in fit for Chevrolet, fit for Oldsmobile, fit for Pontiac, fit for Saab, and fit for Saturn platforms, service range 2002 to current..
  • 【Necessary Tool】The water pump holding tool is a necessary tool for you to replace the water pump. At the same time, it can prevent engine vibration and whining, effectively save your working time and improve workshop productivity..
Check Stock

Yoursme 77080 19mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder Removal Holding Spanner for Honda and Acura Engines

  • 【19mm Harmonic Balancer Socket】Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications. Install/remove Honda 19mm damper....
  • 【Using of 19mm Tool】OAL 89mm, Used with 1/2” square drive.Designed with more than 3 x the mass of standard impact sockets to reduce flex and....
  • 【50mm Removal Holding Spanner】Fits for Honda (most) and Acura engines. Used to maintain the harmonic damper pulley position while....
  • 【Using of 50mm Tool】Used with a 1/2inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating....
  • 【Premium Support: 】Our focus on products and customer services is 2nd to none. We provide friendly 1 years’ warranty support, easy-to-reach....
Check Stock

E-cowlboy for Toyota/Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with 2PCS Crank Bolts

  • FITMENT INFORMATION - Work for Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. also 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
  • KEEP CRANK PULLEY STILL - Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines.
  • ROUND EDGE WITH PRECISION FIT HOLE - Small enough so that no need to remove radiator or other components to access and remove Harmonic Damper Pulley, hole in center of tool allows access to removal of crank shaft bolt, users are available to hold crankshaft while tightening the crank bolt with a torque wrench.
  • PACKAGE INCLUDED - 1 crankshaft damper pulley holding holder tool and 2 crank bolts.
  • 100% SATISFACTION GUARANTEE - If you're not 100% satisfied with this tool, simply return it for a full refund in 30 days, no questions asked money back guarantee with 1 year’s warranty.
Check Stock

OEMTOOLS 27171 Adjustable Fan Clutch Holding Tool, Fan Clutch Removal Tool, Fan Clutch Puller, OEM Fan Clutch Tool, Fan Clutch Pulley, Fan Clutch Set

  • SPEED UP YOUR REPAIRS: Add the fan clutch holding tool to your fan clutch removal tool kit to quicken your repair process.
  • Designed to hold fan clutch with less work.
  • ADJUSTABLE JAW: The clutch fan removal tool features adjustable jaws that fit most water pump pulley bolt patterns, including pressed-on pulleys.
  • Jaws on the universal fan clutch removal tool lock in place, securing water pump bolts.
  • EXTRA LEVERAGE: The longer, high-visibility red handle on the fan clutch removal tool provides leverage for extra torque, helping to eliminate physical strain.
  • ELIMINATE NEED FOR MORE TOOLS: The clutch fan tool for your fan clutch removal kit is way more effective than trying to use a pry bar or wrench to hold the fan clutch.
  • MORE THAN ONE PULLEY: The fan clutch holder for your clutch fan tool kit also holds the camshaft pulley when replacing cam belt.
  • The OEM fan clutch removal tool is versatile.
Check Stock

Camshaft Holding Tool Timing Alignment Holder Tool Set Kit for Ford Lincoln Mercury 3.5L 3.7L 4V Engines Replace 303-1248 303-1530 OTC 6682

  • Fitment Vehicle: Fit Ford V6 3.5L & 3.7L Cyclone Engines, for Ford Edge, Explorer, F150, Flex, Fusion, Fusion Hybrid, Mustang, Taurus, Police Interceptor.
  • for Lincoln MKS, MKT, MKX, MKZ, Navigator.
  • for Mercury Milan, Sable, Replace 303-1248 303-1530 OTC 6682.
  • Exact Match: This camshaft holding tool timing tool set designed specifically for Ford V6 3.5L & 3.7L Cyclone Engines, high precision and great compatibility , and through rigorous engine testing, While is not a genuine original, it is a direct replacement and completely fit, better than spending $300 for a car factory brand tool.
  • Material: Made of high standard structural steel and coated with black oxide finish, it is excellent solid with great durability. Plus, it has good performance on rust and crack resistance to long-lasting service your engine.
  • Professional Timing Tool: This camshaft timing alignment holder tool work great holding the cams to do a water pump. easy to used and holds great.Use this tool to accurately position and align hold your 3.5L & 3.7L camshaft at TDC to perform service.
  • Lifetime Warranty: We offer lifetime warranty, we will refund or replace, if the product have any quality problem.
Check Stock

BZ 3D GT2 Pulley 60 Teeth Bore 8/5mm 60T Timing Pulley Synchronous Wheel Aluminum for Width 6mm 3D Printer Parts (Pack of 4pcs) (60Teeth Bore 8mm)

  • 【High Quality Material】- Timing belt gear is made of aluminum alloy, sturdy and durable,surface oxidation treatment, anti-rust and anti-corrosion effectively.Deburring is carried out at the threaded hole, which is not easy to wear the synchronous belt, also can increase the service life of the synchronous belt..
  • 【Feature】- Timing Pulley contact with the tooth side which minimizes the risk of the belt slipping.Accurate tooth surface of inner hole, less runout and more stable..
  • 【Application】- The XL size aluminum pulley wheel is suitable for general torque transmission design and high speed transmission design. Timing Pulley is widely used in milling machine, CNC engine lathe, gear shaper, hobbing machine, drilling machine or other machinery transmission occassions..
  • 【Package Contents】- 1Pcs x Timing Pulley..
Check Stock

BILITOOLS Fan Clutch Removal Tool Kit, Fan Clutch Wrench Set 22 36 40 47 51 MM with Pulley Holder

  • Fan clutch service tool set includes 5x Fan clutch wrenches - 22mm, 36mm, 40mm, 47mm, 51mm.
  • Special fan clutch wrench tool kit is designed to remove and install fan clutches when repairing or replacing the water pump, timing chain or the fan clutch..
  • The pulley holder with 4 pairs of replacement pins is designed to trap and hold bolt on pulleys by the mouting bolts. It is suitable for most vehicles and newer Chrysler engines with press on pulleys requiring sprcial pins to hold housing..
  • This fan clutch tool Kit is made from forged steel for superior strength, black finish further improves corrosion resistance for lasting durability..
  • The fan clutch wrenches are compatible with Ford Trucks (2.8L, 2.9L, 3.0L, 4.0L, 1.9L engines), Dodge Trucks (3.9L, 5.2L, 5.9L, 8.0L, V10 engines), GM Trucks (4.3L, 5.0L, 5.7L engines), ect..
Check Stock

Genuine OEM Subaru Timing Belt Ten Kit Outback Baja Legacy 2.5 SOHC 2000-2009

  • Need a Genuine Subaru Timing Belt Kit for your 2000-2009 Subaru Legacy Outback or Baja sohc 2.5..
  • Timing Belt 13028AA21B X1 Tensioner 13033AA042 X 1.
  • Lip Idler Pulley 13073AA190 X1 Idler Pulley 13073AA142 X1.
  • 2000-2009 Outback and Legacy & Baja (non turbo).
Check Stock

uxcell Aluminum 20 Teeth 10mm Bore 5mm Pitch Timing Belt Pulley for 15mm Belt

  • This timing belt pulley suits to 15mm timing belt..
  • Used widely in milling machine, 3D printer, drilling machine or other machinery transmission..
Check Stock