Top Tire Pressure Valve

ANKI HAPPIGO 8Pcs 2.2Bar 32PSI Car Tire Pressure Monitor Valve Stem Caps Sensor Indicator 3 Color Eye Alert

  • Material of car tire pressure indicator caps: Chromed Metal+PC.
  • Visually alerts you when the tire pressure is low.
  • Car tire pressure monitor valve caps help to avoid premature tire wear or blowouts from under-inflated tires,increases fuel efficiency, safety and control, extends tire life.
  • Green/yellow/red system indicate level of proper tire inflation.According the recognize color to display the pressure of the tire,Green shows that tire pressure is normal Yellow shows that the pressure is 10% lower than standard Red alerts you that the pressure is 25% lower than standard.
  • Fit for 32PSI(2.2Bar),applicable to car,motorcycle,bicycle and so on.WARNING: When removing a cap. make sure that you do not lose the black washer. They are inclined to fall out and are very difficult to find again. It is advisable to remove them before your car is serviced at a garage..
  • Package : 8 x Tire Pressure Indicator Valve Stem Caps.Notes:When you make automatic car wash,remove these air caps would be better..
Check Stock

OTAUPRS 4 Pcs PVR32 Bolt-in Tubeless Tire Valve Stems Fit 0.453 Inch Rim Holes 90 Degree

  • 【HIGH QUALITY】:The Tire Valve stem are constructed of high temperature brass valve cores and ozone resistant EPDM rubber,100% Ozone tested and leak tested, improve the safety of your vehicle..
  • 【FITMENT】:The Brass Snap-in valve stem is standard diameter and is suitable for any passenger car, Light Trucks, Small Trailers, wheelbarrows, Lawn mowers, ATVs, and Motorcycles.
  • 【SPECIFICATION】:Premium EPDM Rubber&Brass Snap-in TPMS valve stem,Rim Hole Diameter in wheel:0.453inches(11.5mm).100 PSI maximum inflation pressure,Package:8PCS TR412 tire valve stem.
  • 【Easy to install】: With a bolted in design, this rubber tire stem is easy and convenient to install, keeping the tire inflated at a constant pressure level and allowing quick check of PSI.
  • 【GOOD After-sales Service】:Please feel free to contact us if you have any question with the tire valve stem,90 days free return or refund..
Check Stock

CKAuto TR415 Tubeless Rubber Snap-in Tire Valve Stem (50pcs/Bag), Black

  • High Quality: TR415 tire valve stems are constructed of high temperature brass valve cores and ozone resistant EPDM rubber,100% Ozone tested and leak tested.
  • Various Application: Snap-in valve stems for tubeless 0.625” (16mm) diameter rim holes, U.S. standard,providing safe tire system and safe driving, up to 65 PSI cold pressure per industry standard, durable and practical.
  • Easy To Install: with bolt-in design, these rubber tire valve stems are very easy and convenient to install,keep your tires inflated at a steady air pressure level and easily check PSI quickly.
  • Universal Rubber Stem: Valve stems are a standard diameter and fit for most passenger car & light trucks with tubeless tire valves.
  • Dimension： 46 x 24mm/1.81x0.94 inch(L*D).
  • (Pack of 50) Valve Stem 5/8" Rubber - TR415.
Check Stock

TIRETEK Digital Tire Pressure Gauge 0-200 PSI - Tire Gauge for Car, SUV, Truck & Motorcycle - Heavy-Duty Air Pressure Gauge ANSI Certified

  • BUILT TO LAST - Tire air gauge with high-resolution digital display, heavy-duty rubber shock shield, rust-proof brass & copper construction, 45° angle and fully 360° swiveling chuck, for the most comfortable measurements. This top-rated tire pressure monitoring system is the perfect air gauge for tires on any motorcycle, car, truck, SUV, RV, or trailer..
  • ACCURACY - Our digital air gauge tire pressure gauges are skillfully calibrated to provide your tire pressure within (±0.5%). Grade A by international accuracy standards, so you get precise, accurate measurements every time you use our car tire pressure gauge. Tire pressure too high? Our built-in relief valve allows you to press the bleed button while the gauge is still on the tire valve, releasing air until you reach the exact target required..
  • PROFESSIONAL-GRADE FUNCTION - The best features of any psi gauge with ability to hold reading even off the valve, zero readings, and an extended chuck tip, so you get a secure seal with no air leakage. This robust and durable precision automotive tool is also surrounded by a rubber cover, so it is protected from drops and is easy to grip..
  • HIGH-RESOLUTION - LCD display screen features battery life indicator & bright LED backlight for perfect visibility anytim....
Check Stock

WISTEK Bluetooth Tire Pressure Monitoring System, with 4 External Sensors TPMS, 5 Alarm Modes and Real-time Displays Pressure and Temperature, Support iOS and Android with APP Operation

  • ...ooth TPMS support IOS and Android with APP"TPMSII", very stable, quick connection and real-time data transfer. When do the bluetooth scan, the APP will ask for permission of location, please accept as android system request.
  • 【 Five Alarm Modes】 Bluetooth Tire Pressure Monitoring System with High-temperature alarm and low battery alarm, quick & slow leak alarm, High voltage alarm.
  • 【Dynamically Monitor】 This motorcycle Tire Pressure Monitoring System is dynamically monitors all tire pressure and temperature, improves fuel efficiency, and prolongs tire life and ensures driver safety..
  • 【High Accuracy】 Real time monitor with 2 TPMS Sensors, waterproof and anti - corrosion, anti -theft technology, fully qualified for rainy days. High sensitivity, good accuracy for measuring pressure and temperature.
  • 【Installation】 First, Scan the QR code we shipped with the product, download the APP to install. Second, Remove tire valve caps, put in anti-theft screws.
  • Install outer sensor on tire valve in order.
  • Hold the sensor, tighten anti-theft screw. make sure sensor ins....
Check Stock

ACCRETION TR415 Rubber Snap-in Tire Valve Stem for Tubeless 0.625 Inch 16 mm Rim Holes on Standard Vehicle Tires (Set of 4)

  • ✅ Design: These rubber tire valve stem with bolt-in design, easy and convenient to install and hold the pressure good.
  • ✅ Purpose: the type of the valve stem is TR-415.
  • This valve stem is approx. 1.25 inch long.
  • Fits for most rime holes of 16 mm/ 0.625 inch in diameter.
  • ✅ EASY TO INSTALL: with bolt-in design, these rubber tire valve stems are very easy and convenient to install,keep your tires inflated at a steady air pressure level and easily check PSI quickly.
  • ✅ Superior quality: Ozone tested and 100% leak tested, these tire valve stems are manufactured from EPDM rubber.
  • ✅ Premium TR415 Rubber Snap-in Valve Stem ,Hole Diameter in Wheel:0.625 inches(16 mm), Package Contents: 4 x TR415 Tire Valve Stems.
Check Stock

Milton S-697-2 1/4 FNPT Euro Style Air Chuck

  • Unique design allows chuck to easily clip on to valve threads for hands free tire inflation.
  • Easy on style air chuck - press down on handle, push onto tire valve threads and release handle to grip threads.
  • Air chuck Euro style air chuck with grip chuck clip 1/4" Female NPT Max pressure 150 PSI Chuck clips on to tire valve Skincard.
  • Max. pressure: 150 pounds per square inch.
  • Milton is your number 1 source for Quality Air Accessories.
Check Stock

Riseuvo Valve Stem Puller Installer Tool - 10pcs TR412 Tire Snap in Short Rubber Valve Stem, 4 Way Valve Core Remover, Single Head Tire Valve Core Remover Installer Tool

  • All Tool You Need - 1 pcs valve stem puller installer Tool, 10 Pcs TR412 valve stems with 20 pcs valve stem cores, 1 pcs single head valve core tool, 1 pcs double heads valve core remover tool, 1 pcs 4 way valve tool..
  • Valve Stem Puller - For installation or removal of snap in type tubeless tire valves.
  • Rubber Tire Valve Stem - These rubber tire valve stem with bolt-in design, easy and convenient to install and hold the pressure good.
  • 4 Way Tool - Remove your valve core, re-tap threads and ream the inside of the valve (also works on A.C. unit valves).
  • Single or Double Head Tire Valve Core Remover - For quick removal or installation of tire valves. It is often necessary to wring out the valve core when aerated or deflate the tire, then you need the tire valve removal tool.
Check Stock

ACCRETION TR412 Rubber Snap-in Tire Valve Stem for Tubeless 0.453 Inch 11.5mm Rim Holes on Standard Vehicle Tires (Set of 4)

  • ✅ Design: These rubber tire valve stem with bolt-in design, easy and convenient to install and hold the pressure good.
  • ✅ Purpose: the type of the valve stem is TR-412.
  • This valve stem is approx. 0.866 inch long.
  • Fits for most rim holes of 11.5 mm/ 0.453 inch in diameter.
  • ✅ EASY TO INSTALL: with bolt-in design, these rubber tire valve stems are very easy and convenient to install, keep your tires inflated at a steady air pressure level and easily check PSI quickly.
  • ✅ Superior quality: Ozone tested and 100% leak tested, these tire valve stems are manufactured from EPDM rubber.
  • ✅ Premium TR412 Rubber Snap-in Valve Stem ,Hole Diameter in Wheel:0.453 inches(11.5mm), Package Contents: 4 x TR412 Tire Valve Stems.
Check Stock

ATsafepro Digital Tire Inflator with Pressure Gauge 200PSI,Tire Inflator Gauge Equipped with Lock On Air Chuck and Extended Chuck Suitable for Cars, Bikes, and Semi, Air Compressor Accessories

  • RELIABLE & HIGH ACCURACY digital tire pressure gauge with inflator, professionally calibrated & certified accuracy to within 1% with display resolution of 0.1 psi, far more durable and convenient than analogue version! Support four kinds of measurements and range from 0 to 200 PSI(14 Bar,1400 KPa or 14 Kgf/cm²)..
  • BRIGHT LED LIGHT & MULTI-FUNCTION digital tire inflator with gauge and LED Light on the back for easy to operate in the dark and can be used as a flashlight.
  • this gauge can not only be a tire pressure gauge to accurately monitor tire pressure.
  • but also a tire inflator to inflate tires when connecting an air compressor (work with 1/4" NPT). Besides, the tire inflator gauge can be a tire deflator to quickly bleed off overinflated tires via press its air bleeder valve..
  • ERGONOMIC DESIGN AND SAFTY CONSTRUCTION: Extended handle make the control more smoothly simple operation, and this digital air pressure gauge inflator built of high quality material and strict manufacturing process make sure long-term performance, leakproof, rapid inflating etc. Widely suitable for all kinds of vehicles including construction vehicles(with 8V1 schrader valves), Semi. SUV, cars, motorcycles, bicycles (with schrader valves) and so on..
Check Stock

CZC AUTO Pencil Tire Pressure Gauge, Mechanical Air Gage, Stainless Stem Single Chuck with Pocket Clip Tyre Checker for Motorcycle Bike Car RV SUV ATV, 5-50PSI 30-350KPa (Silver, 1 Pack)

  • WHY YOU NEED A AIR GAGE: A reasonable inflated tire save fuel, increase the tire's lifespan, improve the driving experience, and insure the driving safety. Please use tire gauge to test the wheel pressure every week regularly when the tire is cold, especialy before long distance travel. Great gift for father's day..
  • PREMIUM MATERIAL: CZC AUTO tyre gauge features with stainless steel stem and zinc alloy single head, durable. 2 sides white ABS scaleplate with clear marks, one side with black scale 5-50PSI, and the other side with red scale 30-350KPa, accurate and reliable, perfect for car, suv, rv, atv, bike (with schrader valve) or motorcycle..
  • HUMANIZATION DESIGN: This single head wheel air checker adopts 45 degree angle single head with 5MM extended tip, for easy operation. Pocket-size pencil style and pocket clip are desiged for easy storage. There are also 4 free valve caps for replacement. The tire pressure gauge is your vehicle's indispensable companion..
  • EASY TO OPERATE: Twist off the valve cap, press the mechanical tire gage chuck to the valve, then the scaleplate will slip out and you can read the tire pressure from the scaleplate. After using, please twist on the valve cap and push the scaleplate back..
  • No battery needed. For sedan, 28-35PS....
Check Stock

SAFELIFE Bike Straight Presta Valve Tire Air Chuck 1 PC, L-Type Schrader Tire Chuck 1 PC for Bicycles, Motorcycles, Medium & Small Cars - 1/4" NPT Open Flow

  • Ready to use tire chuck air tool(2 pack), compatible with any gauge or air compressor using 1/4" NPT threading. L-type：1.34*0.63*1.77 inch.
  • Built to last from solid brass, corrosion-resistant. Presta Valve bicycle air chuck features straight angle to get in between spokes of tires to access valve stem with ease. Schrader Valve car air chuck with 90 degree body easy access to hard-to reach tire valve stems..
  • Straight air chuck engineered for bicycle tires that use Presta valve stem systems - including mountain bikes (MTB) and road bikes. L-type air chuck suitable Schrader valve tires for bicycles, motorcycles, and small and medium-sized vehicles..
  • Open flow technology air flow freely through chuck, no check valve. Perfect for inflating tires by using an attached air compressor, or simply checking pressure and deflating by using a compatible tire pressure gauge..
  • Package includes： 1 PC Presta Valve Tire Air Chuck.
  • 1PC L-type Schrader Valve Tire Air Chuck.
  • A reasonable combination meets your different needs..
Check Stock