Top Tires For Traxxas Slash 2wd

Globact Aluminum Alloy Front Caster Block&Steering Blocks and Rear Stub Axle Carriers kit with Ball Bearings Upgrade Parts for 1/10 Traxxas 2WD Slash, Stampede, Rustler, Replace 3632 3736 3752

  • RC 1/10 front caster steering blocks kit can be easily upgraded and replaced #3632 Caster blocks, #3736 Steering blocks, #3752 Stub axle carriers (rear)..
  • Front steering block knuckle kit is only compatible with 1/10 Traxxas 2WD Slash, Stampede, Stampede VXL, Slash VXL, Rustler, Rustler VXL, Ford F-150 Raptor RC vehicle ONLY..
  • Suitable for traxxas rustler 2wd steering blocks use aluminum alloy material, more wear-resistant, not easy to deform..
  • Multi-hole design, adjustable tie rod angle can be used for Traxxas Slash 2WD Caster Block.
  • Globact 2WD caster steering blocks Include(Necessary parts required for installation): 2*Rear Stub Axle Carriers, 2*Steering Block, 2*Caster Blocks (L/R), 6*Screw Pins, 2*Screw, 8*5x11x4mm bearings, 4*Gasket..
Check Stock

CrazyHobby RC Short Course Truck Wheels and Tires with Foam Inserts for 1/10 Traxxas Slash 4X4 2WD Losi Tenacity TT Baja Rey 22SCT HPI Redcat Blackout SC, Set of 4 (Style 2)

  • The Tires NOT Glued on Wheel Rims. Foam Inserts.
  • Check size before purchase–Tires Outer diameter(Height): 4.72 inches (120mm) | Width: 1.77 inches (45mm) | Wheel Hex size: 12mm Hex Hubs.
  • Fits for 1/10 Traxxas Slash 4X4, Slash 2WD, Losi Baja Rey, Losi 22SCT, Losi Tenacity TT Pro, 1/10 Losi Ten-SCTE 4WD, Redcat Blackout SC, HPI Jumpshot SC V2 Short Course Truck 2WD Cars Models.
  • What you will get: 4 Tires and 4 Wheels, 1 Cross Wheel Wrench.
  • 100% New, Genuine CrazyHobby Products,Exquisite workmanship & Durable,Buy with Confidence,Friendly Customer Service.
Check Stock

Traxxas Slash 2WD Chassis Pre-Roller Gray Conversion Chassis 5822

  • This is a brand new Traxxas 2WD Slash chassis..
  • It includes everything seen in the pictures.
  • - chassis, skid plates, nerf bars, battery hold down, steering linkage, fiberglass tie bar, suspension arms, shock towers, camber links, screws, owners manual, parts list, and tools..
  • Turn your Stampede, Rustler, or Bandit into a Slash with this conversion chassis.
  • Pulled from a brand new Traxxas 2WD Slash..
Check Stock

Traxxas 3678A Wheelie Bar, Green

  • Aluminum Slash Wheelie Bar Kit for 1/10 Traxxas Slash 2WD, Rustler, Bandit trucks..
  • This CNC Machined aluminum wheelie bar kit is 7" in length and allows a variety of tuning options with an adjustable angle, double or single wheel setup options, and limits flex with solid aluminum ladder frame construction..
  • Rubber tires ​to allow smooth rotation and low drag..
  • CNC Aluminum alloy construction offers an extra level of protection for the motor and transmission case.
  • Aluminum Adjustable Wheelie Bar Kit was developed for No Prep RC Drag Racing.This part Is for On Road Speed Run and is NOT recommended for off-road use..
Check Stock

CODA RACING RC Alloy Caster Block&Steering Blocks&Rear Stub Axle Carriers for Traxxas 1/10 2WD Slash, Stampede, Rustler, Nitro Slash-Replaces Part 3736 3632 3752

  • Easy upgrade replace Traxxas stock part #3632 Caster blocks，#3736 Steering blocks,#3752 Stub axle carriers.
  • Fits: Traxxas 1/10 Slash 2WD ,1/10 Stampede 2WD,1/10 Rustler 2WD,1/10 Ford F-150 Raptor,1/10 Nitro Slash 2WD,Bigfoot 2WD.
  • Precision CNC machined,Anodized 6061-T6 aluminum for lightweight and durable performance..
  • Includes Caster blocks&Steering blocks(L/R),Stub axle carriers(L/R),5x11x4mm bearings(8),PTFE washers(8),Suspension Screw Pins(6),Screws(2),Washers(4).
Check Stock

Globact Aluminum Adjustable Turnbuckles/Camber Link with Rod Ends Sets for Traxxas Slash 4X4/2WD 1/10 Upgrade Parts 7Pcs Blue

  • Aluminum Turnbuckles/Camber Link with Rod Ends Sets for Traxxas Slash 4X4/2WD 1/10 Upgrade Parts,Replacement of Traxxas #1935 3644 3745 3741X....
  • 1/10 camber link adjustable Length,Long Suspension Link 6 x linkages,length from 68 to 88mm,(center to center),Short Suspension Link,1 x....
  • Compatible with traxxas slash 4x4 links package Include:7 x Adjustable Metal Links,14 x Screws and 8 x Nylon Lock-Nuts..
  • Slash 2WD Link must Note: 1. The Link Rods is installed on the chassis of the remote control car and fixed with screws to solve the loosening problem.....
Check Stock

GLOBACT 4PCS All Aluminum Front & Rear Shocks Upgrade Parts for 1/10 Traxxas Slash 2WD Slash 4x4 4WD Rustler Stampede Hoss RC Truck, Replace 5862 (Blue)

  • 【Compatible with】Suit for 1/10 Traxxas Slash Shocks 2WD / Traxxas Slash shocks 4x4 / Rustler shocks 4×4&2WD / Stampede shocks 4×4&2WD / Hoss shocks 4×4&2WD, Replacement of Stock Part# 5862..
  • 【Excellent quality】CNC machined for precision, Assembled with widened TiN shafts and springs provide optimal bump and jump control for your Traxxas model. A built-in sealing ring can effectively prevent oil leakage..
  • 【High-quality materials】Made of lightweight Aluminum alloy material, which is durable and improves the performance of the RC trucks, Unique colors make your car unique..
  • 【Shock Size】RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:100mm/3.9") & 2x Alloy Rear Shock Absorber (Total length:115mm/ 4.5”)..
  • 【What You Get】2 x Front Shock, 2 x Rear Shock, 8 × Screws, 4 × washer. (This set contains a small amount of lubricating oil, which can be used directly without adding oil)..
Check Stock

Black Chassis Bundle for Traxxas Slash/Raptor 2WD, Convert a Stampede, Rustler or Bandit to a Short Course SCT Truck, Custom Build a Drag Car, Dirt Oval Racer, Sand Buggy, or Monster Truck 5822

  • Stock Chassis kit for Traxxas 2WD Slash or Raptor.
  • Includes everything seen in pictures - 2WD Slash bumpers, chassis, skid plates, nerf bars, battery hold down, steering linkage, camber links, fiberglass tie bar, suspension arms, steering arms, caster blocks, shock towers, screws, owner’s manual, parts list, and tools.
  • Start a custom build – Drag Slash, Sand Buggy, Monster Truck or Dirt Oval Racer.
  • Parts needed to complete the build are - transmission, drive shafts, bearings, hubs, tires, body mounts, body, and electronics.
  • Part numbers included – 5822A, 5837, 5835, 5823, 3745, 3638, 3639, 2555, 3631, 2578, 2640, 3644, 5836, 5827 and more.
Check Stock

AIYIHOBBY Aluminum Alloy Front Caster Block & Steering Blocks kit with Ball Bearings Upgrade Parts for 1/10 Traxxas 2WD Slash, Stampede, Rustler, Replace 3632 3736(Blue)

  • Compatible with 1/10 Scale Traxxas 2WD Slash, Stampede, Stampede VXL, Slash VXL, Rustler, Rustler VXL, Ford F-150 Raptor, Nitro Slash, Bigfoot 2WD RC Cars Trucks ONLY..
  • 2WD Front Caster Steering Blocks kit can be easily upgrade replace Traxxas stock part #3632 Caster blocks, #3736 Steering blocks..
  • 1/10 Front caster steering blocks kit is made of aluminum alloy material for increased crash resistance and long-lasting durability during the most extreme RC action..
  • Metal front caster steering blocks is CNC precision machining for smooth suspension arms operation in all conditions..
  • Package Include(Necessary parts required for installation): 2*Steering Block, 2*Caster Blocks (left/right), 6*Screw Pins, 2*Screw, 4*5x11x4mm bearings, 4*Gasket..
Check Stock

RC Front Rear Drive Shaft&Shock Absorber&Camber Link,Steering Blocks Caster Blocks Stub Axle Carriers for 1/10 Traxxas Slash,Rustler,Stampede 2WD VXL Cars (Blue)

  • Compatible with 1/10 Traxxas Slash 2WD VXL,Rustler 2WD VXL,Stampede 2WD VXL ,Nitro Slash,Bigfoot 2WD Cars..
  • Front rear big bore shock offer incredible durability and near frictionless operation for ultra-smooth damping and long-lasting performance.ensure high reliability and good compatibility, high protection..
  • Slash drive shaft with Increased crash resistance and long-lasting durability during the most extreme RC action, Solve the problem of drive shaft fracture,ensuring maximum durability and for long time service life..
  • Rustler camber link has ingenious design, professional manufacturing and fine workmanship, It is designed to allow more smooth rotation and strength.(If the connecting rod screw is loose, you could adjust them according to the suitable length of the rc car,fix the connecting rod on the car shelf and tighten the screws to solve the loosening problem)..
  • Suitable for traxxas caster steering blocks for increased crash resistance and long-lasting durability during the most extreme RC action..
Check Stock

Traxxas 58014-4 Slash 2WD Unassembled Kit 1/10-scale 2WD Short Course Truck

  • Traxxas 58014-4 - Slash XL-5 1/10 2WD Short Course Truck Unassembled Kit.
  • Features: Unassembled kit with electronics Includes XL-5 ESC, Titan 12-turn motor, servo, and TQ 2.4GHz radio system Clear, fully-trimmed Slash body....
  • Includes: (1) Slash 2WD Assembly Kit: 1/10-Scale 2WD Short Course Truck (1) Clear body (1) Transmitter (1) Receiver (1) Servo (1) ESC (1) Motor (1)....
  • Part number(s) included (in factory packaging): 58014-4.
Check Stock

for Traxxas Slash Rustler Bandit Vxl 4X4 4WD 2WD Orange Parts Shocks Absorber Front Rear 1 10 Damper Short Course Racing Truck Upgrade 4-Pack

  • ✔ Compatible With traxxas slash 4x4/ traxxas rustler 4x4 vxl/traxxas slash 2wd/traxxas rustler/traxxas bandit/traxxas stampede/Rally 4X4/Hoss 4x4 VXL.
  • ✔ Fitted Really Well.Oil Filled Style,Adjustable Tension,Very Smooth And Durable.Good for Big Jumps..
  • ✔ Alloy Aluminum Front Shock Absorber : Approx.100mm.
  • Alloy Aluminum Rear Shock Absorber : Approx.110mm.
  • ✔ 4 Shocks Per Package. All Hardware For Assembly Included..
  • ✔ Premium Quality Aluminum Shocks Upgrade Parts Ship Fast .Responsive Customer Service..
Check Stock