Top Titanium Coated End Mill

SpeTool 14411 Ball Nose Carbide End Mill CNC Cutter Router Bits Double Flutes Spiral Milling Tool 1/4 inch Shank with 3 inch Over Length

  • Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

End Mill Bits, HSS CNC End Mill Cutter for Wood, Aluminum, Steel, Titanium, Straight 4 Flute Mill Bit Set of 6（3mm,4mm,6mm,8mm,10mm,12mm）

  • 1.Four flutes produce a better finish than fewer flutes..
  • 3.One Set of end mill bits Including: 6 Different kinds of Size end mills to meet your need, 3mm, 4mm,6mm, 8mm,10mm,12mm.
  • 4.Hardness of metal for above HRC 45 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • 5.End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
Check Stock

SpeTool 5Pcs 2-Flute Square Nose Carbide End Mill 1/8 Inch Router Bit with 1/8 inch Shank CNC Machine Tools, TiAlN Coated

  • ENDMILL SIZE. 1/8" shank, 1/8" cutting diameter, 1/2" cutting length, 1-1/2" over all length.
  • SPECIFICATION. Flat top, 2-flute, HRC55 with tialn coated, use 1/8" collet.
  • PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology.
  • excellent cutting results and enhanced productivity.
  • WIDE APPLICATION. For cnc, engraving machine, carbon steel, mould steel, inconel, stainless steel, titanium alloy etc.
  • suitable for side milling, end milling, finish machining, etc..
  • PACKAGE INCLUDE. 5 pieces high quality end mill pack in a individual plastic box.
Check Stock

OREI eARC 4K 60Hz Audio Extractor Converter 18G HDMI 2.0 ARC Support - HDCP 2.2 - Dolby Digital/DTS Passthrough CEC, HDR, Dolby Vision HDR10 Support (HDA-927)

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

SpeTool 5PCS 2 Flutes Square Nose End Mill Set Power Milling Machine Carbide Upcut CNC Router Bits Tiain Coated, 1/4 inch Shank, 2 1/2 inches Long Overall

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • Flat Top with 2-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Endmill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Kodiak Cutting Tools KCT133263 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/8\ Shank, 1/2\ Length of Cut, 1-1/2\ Overall Length, 1/8\ Diameter

  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Rannb End Mill Cutter 1/16\ Cutting Dia 1/4\ Shank Dia 4 Flutes End Mill Drill Bit - 5pcs

  • ⭐【Material】The end mills are made of High Speed Steel,high hardness,good wear resistance and durability..
  • ⭐【Pack of 5pcs】Sold in pack of 5pcs of end mill cutters..
  • ⭐【Good Design】 Large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • ⭐【Applicable Material】Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.And Circuit boards,Metal,Majority of plastics, Wood, Fibre glass, Carbon and environmental board..
  • ⭐【Heat Treatment Process】The High Hardness Steel go through the heat treatment process so the end mill is more durable. Reduce changing times and improve the production efficiency..
Check Stock

YG1 E5G97911 | 1/4x1/4x5/8x2-1/2 AluPwr 3FL HP Carbide Corner Radius End Mill

  • Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.
Check Stock

SpeTool 5Pcs/Set Flat Nose Double Flute Carbide End Mill 1/32' Cutting Dia Router Bits Cutter CNC Machine Tools for Carbon Steel Soft Alloy Steel Die Steel Tool Steel Cast Iron Wood

  • SIZE. 1/8" shank, 1/32" cutting diameter, 5/64" cutting length, 1-1/2" over all length.
  • SPECIFICATION. Flat top, 2-flute, HRC55 with tialn coated, use 1/8" collet.
  • PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology.
  • excellent cutting results and enhanced productivity.
  • WIDE APPLICATION. For cnc, engraving machine, carbon steel, mould steel, inconel, stainless steel, titanium alloy etc.
  • suitable for side milling, end milling, finish machining, etc..
  • PACKAGE INCLUDE. 5 pieces high quality end mill pack in a individual plastic box.
Check Stock

Niagara Cutter 17016418 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Finishing Cut, 30 Degree Helix, 4 Flutes, 3.25' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter

  • 4 Flute design for creating finer finishes and creating a higher metal removal rate.
  • General purpose end mill for working on all types of materials.
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Titanium Carbonitride(TiCN) allows for optimal end mill and machine tool performance with it's ability to increase material removal rates 3 to 5 times that of uncoated tools.
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling and slotting.
Check Stock

Niagara Cutter C430R-0.375-D3-R030.0-Z4 C430R Carbide Radius End Mill TiAlN Finish 4 Flutes 3/8 Cutting Diameter 3/8 Shank Diameter 2-1/2 Overall Length 1

  • Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.
Check Stock

YG-1 EH970 Carbide Square Nose End Mill, Long Reach, TIALN Multilayer Finish, Roughing Cut, 45 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

  • Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills.
  • Fine-pitch tooth design and tool geometry are suitable for machining steel up to Rockwell hardness C45, stainless steel, titanium alloys, and nickel-based alloys.
  • Long-reach end mills have an extended shank for access to recessed areas of the workpiece.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Check Stock