Top Titanium Coated Taps

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • ... 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up thre....
Check Stock

uxcell M3 M4 M5 M6 M8 Spiral Flute Taps Set Titanium Coated High-speed Steel Machine Thread Metric Screw Taps 5pcs

  • Tap Size: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy..
  • Material & Coating: High-speed steel taps features high hardness and toughness, good for general purpose applications. Titanium coating is for capability, durability, wear-resistance, and long service life..
  • Applications: Suitable for processing blind holes and sticky materials. Suitable for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force..
Check Stock

uxcell Spiral Flute Taps M12 x 1.75 + 0.03 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

  • Spiral Flute Taps: Thread Size: M12 x 1.75 + 0.03.
  • Square End Size: 7mm / 0.28". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction..
  • Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
  • Special Design: Enlarge the tap to suit the workpiece that needs electroplating or sandblasting after tapping. According to the thickness of the coating, an amplification of 0.03-0.1mm is generally used. It has high hardness and toughness, wear resistance, heat resistance..
  • Easy to Use: Used on drilling and tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips: Prone to chipping or breaking due to speed overload or non-vertical tapping. Use the correct tapping too....
Check Stock

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • ... 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up thre....
Check Stock

uxcell Metric Machine Tap Left M5 Thread 0.8 Pitch H2 Accuracy 3 Flutes High Speed Steel

  • plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life.
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc..
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps.
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping.
Check Stock

uxcell Thread Milling Tap 8-32 UNC, M42 HSS (High Speed Steel) Uncoated 3 Straight Flutes Machine Screw Threading Tap 2B Tolerance Grade

  • Tap Size: M1.8 x 0.35 metric thread, H2 thread tolerance grade. Straight flute design, downward chip removal, fast tapping with accuracy. Titanium coating can improve wear resistance, corrosion resistance and rust protection..
  • Applications: Suitable for processing through holes or shallow blind holes. Perfect for tapping stainless steel, copper, aluminum, etc.. Micro taps are mainly used for watches and clocks, and drilling materials in low hardness, such as wood, plastic and soft metals..
  • Cobalt High Speed Steel Tool: High speed steel (HSS) tool with cobalt has higher hardness and precision, better wear resistance and toughness, higher heat resistance. It is made by adding 5%-8% cobalt to the general-purpose high-speed steel..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Recommended feed rate: General steel: 6-15m/min.
Check Stock

4mm x 0.7 M35 HSS-CO Metric Right Hand Tap M4 x 0.7mm Pitch For Stainless Steel

  • plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life.
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc..
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps.
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping.
Check Stock

uxcell Spiral Flute Threading Tap 10-32 UNF, HSS (High Speed Steel) Titanium Plated Machine Thread Screw Tap 3 Flutes Tapping Tool H2 Tolerance

  • Tap Size: 10-32 UNF thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection..
  • Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

TUMBEELLUWA Rock Quartz Crystal Points Loose Beads for Jewelry Making Titanium Coated Polished / Raw Quartz Points Beads 15 Inches Top Drilled,Yellow Crystal Points 0.5 -1.6

  • Titanium coated crystal points loose beads, top drilled, graduated, 15 inches strand. Crystal point size:approx 13-42mm(0.5-1.6 inches) in length,....
  • Energy Stone Loose Beads--Natural minded from earth and permanently bonded with titanium coated. Titanium Aura crystals is full of energy and have the....
  • Pocket Stone / Healing Crystal Points--You may take one(s) crystal point bead(s) from strand and carry in your purse or pocket. Have this nearby in....
  • Stunning crafts home decor--titanium coated crystal points, shows a colorful effect, very shiny. Elegant decorations choice for your home..
  • Gift recommend-- Perfect gift choice for yourself and the one you love and care..
Check Stock

ORION MOTOR TECH 86pc Tap and Hex Die Set in SAE and Metric | Titanium Coated Steel Tap Set and Die Tool Set for Homeowners Mechanics Metric Standard Internal External Threading(Iron Case)

  • ALL-IN-ONE TAP & DIE SET: This 86-piece internal and external threading tool kit by Orion Motor Tech includes both coarse and fine taps and dies in the most needed standard and metric sizes, from #4 (14/125") to 5/8 inch and from M3 to M16.
  • USER-FRIENDLY DESIGN: This tap and die set is engineered to tight tolerances to meet professional needs.
  • the tap ends are 1/5 to 2/5 inch long for easy use with the provided standard and metric wrenches.
  • PREMIUM DURABILITY: This tool set for homeowners, craftsmen, and mechanics is made of high-carbon chromium bearing steel.
  • titanium plating provides even greater strength, durability, and longevity so you can tackle any job with confidence.
  • ADDITIONAL TOOLS: In addition to the 78 taps and dies, this tool set includes both adjustable and T-handle wrenches, a 1/8" flathead screwdriver, and thread pitch gauges to find and carve the exact threading you need through wood, copper, aluminum, iron, steel, and more!.
  • BLOW-MOLDED CASE: The metal storage case stores and organizes the SAE and metric taps and dies, providing easy organization and portability wherever you need them.
Check Stock

ABN Large Tap and Die Set Metric Tap and Die Kit Rethreading Tool Kit Thread Maker Hole Threader 110-Piece Set, Metric

  • plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life.
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc..
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps.
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping.
Check Stock

Hegebeck Thread Milling 3/8-16 Thread Taps Extrusion Taps H2 Thread Drill Thread Milling Plug for Manual Equipment Special Processing Consoles 1 Pcs

  • Thread Size: M4 x 0.7mm. High-speed steel taps are with high hardness and toughness for wear resistance, well suited for general purpose applications..
  • Can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications..
  • Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Appropriate addition of coolant (e.g., water) can extend the service life when tapping..
  • Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading..
  • The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing..
Check Stock