Top Titanium Nitride Coated Spiral Point Taps
Makita B-65399 Impact Gold 14 Pc Titanium Drill Bit Set 1/4 In Hex Shank
- Titanium nitride (TiN) coating lasts 2.5x longer than non-coated bits.
- 135 degree split point geometry for faster starts and reduced walking.
- Impact rated: For use in 1/4 inches Hex impact drivers.
- For drilling holes in ferrous metal, wood, plastic, non-ferrous metal, cast iron and stainless steel.
Check StockMakita B-49373 75 PC Metric Drill and Screw Bit Set
- Includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications.
- Includes (5) Phillips, (5) Pozidriv, (5) Torx and (5) slotted insert bits.
- Includes (3) Phillips, (3) Pozidriv, (4) Torx, (2) slotted, and (4) hex power bits.
- Includes (19) titanium nitride coated high speed steel (HSS tin) metal and wood drill bits with size range of (1 - 8 millimetre).
- Includes (4) Brad point wood drill bits with size range of (4 - 8 millimetre).
Check StockRiedell UPTOWN 120 BR Mens Rhythm Skates 2009 - Size 5
- TOP QUALITY CRAFTSMANSHIP - These precision bearings come equipped with hardened Swiss chromium steel alloy balls that can endure long-lasting use..
- OPTIMIZED DURABILITY - The KwiK Swiss Nitride bearings use a Titanium Nitride coating. This coating does not chip, flake, or degrade during prolonged rough use..
- CORROSION RESISTANT DESIGN - The KwiK bearings' Titanium Nitride-coated races resist corrosion. They also provide strength and smoothness to create a performance with the greatest roll..
- FRICTION RESISTANT RETAINERS - These bearings come equipped with friction resistant Delrin retainers that are pre-spun with high-performance oil..
- SLEEK & LUXURIOUS DESIGN - The 8mm skate bearings come with a metallic gold finish, a design that is worthy of its performance. This product is not a children's product and is not designed or intended for use by children 12 years of age or younger..
Check StockKlein Tools 25950 Step Drill Bit Set Spiral Double Fluted Titanium Nitride Coating 1/4-Inch Impact Shank Rugged Case 4-Piece
- 4 COMMONLY USED STEP BITS sized 1/2, 3/4, 7/8, and 1-3/8-Inch for cutting holes in wide variety of DIY applications and materials (up to 16 gauge steel, plastic, aluminum, wood).
- TWO SPIRAL FLUTES on each step drill bit remove chips and help pull the bit through material for faster cutting.
- TITANIUM NITRIDE COATING to help dissipate heat for longer bit life.
- 1/4-INCH HEX SHANK for firm, positive grip in standard drills and impact drivers.
- SPLIT POINT TIP starts hole cuts quickly and prevents drifting when pressure is added.
Check StockKlein Tools 25951 Electrician s Step Drill Bit Set Spiral Double Fluted Titanium Nitride Coating 1/4-Inch Impact Shank Case 3-Piece
- 3 STEP BITS sized 7/8, 1-1/8, 1-3/8-Inch are perfect for hole cutouts in panels and j-boxes to accommodate most commonly used conduit sizes.
- TWO SPIRAL FLUTES on each step drill bit remove chips and help pull the bit through material for faster cutting.
- TITANIUM NITRIDE COATING to help dissipate heat for longer bit life.
- 1/4-INCH HEX SHANK for firm, positive grip in standard drills and impact drivers.
- SPLIT POINT TIP starts hole cuts quickly and prevents drifting when pressure is added.
Check StockNEIKO 10194A Titanium Step Drill Bit High-Speed Alloy-Steel Bit Hole Expander for Wood and Metal 10 Step Sizes from 1/4 Inch to 1 3/8 Inches
- HIGH-QUALITY DRILL BIT: Our Titanium Drill Bit is made with #4241 high-speed alloy steel and has a titanium nitride coating for extra durability. The 2-flute design makes this bit a fast and long-lasting metal cutting tool..
- VERSATILE DRILL BIT: This multifunctional spiral drill bit fits securely in most pistol drills, drill presses, and other hand power tools. Use this versatile small cone-shaped drill bit for metal and wood projects at work or home..
- DRILL BIT FOR HARDENED STEEL: Use this steel drill bit for drilling steel, wood, and other thick metal. It has a 135-degree split-point tip and features a 2-fluted spiral design that automatically deburrs and expands holes for a cleaner drilling process..
- MULTISIZE DRILL BIT: This hole drill bit has 10 different sizes engraved on the bit itself for easy readability. It can drill holes in the following sizes: 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1 1/8", 1 1/4", and 1 3/8"..
- HEAVY-DUTY DRILL BIT: Our multifunction drill bit is created to work with any project, large or small. You can use it to drill new holes or enlarge existing ones without having to change drill bits. Get your work done with confidence and speed!.
Check Stock6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS
- Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
- Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
- Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
- Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
- Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..
Check Stockuxcell Spiral Point Plug Threading Tap M6 x 0.75 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End, 2pcs
- PACKAGE INCLUDES: There are total 12pcs of taps in 2 different standards( Metric, Inch) that you can use for tapping various threads..
- DRILLING & TAPPING: This hex shank drill bits can drill and tap at the same time, saving your time and effort..
- HEX SHANK: This is a set of 12 pieces hex shank drill bits. Drill taps are designed with spiral flutes, which have better the chip clearing process..
- MARKED CLEARLY: Their specifications are marked clearly on the surface from M3 to M10, so you can find the right drill tap bit you need quickly..
- HIGH HARDNESS: The hex shank drill bits are made of high speed steel with titanium coated, the drill bits have high hardness, rustproof, solid and durable..
Check StockChampion Cutting Tool MSD-HEX-SET Impact Ready Step Drill Bit Set
- 3 piece step drill bit set. Includes msd-hex-1 (1/8-1/2), msd-hex-3 (1/4-3/4), msd-hex-4 (3/16-7/8) and qcd (quick change driver).
- Titanium nitride (tin) coated for enhanced performance and longer tool life.
- Impact ready! 1/4" hex shank is ideal for use in impact drivers and cordless power drills.
- 2 flute design drills faster, cleaner holes than other step drills on the market! accurate, fast drilling due to self starting split point!.
- Ideal for drilling steel plate, stainless steel, sheet metal and tubing up to 1/8" thick..
Check StockNEIKO 10173A Step Drill Bit Set for Metal and Wood, 5 Piece SAE, Spiral Grooved for Faster Drilling, Step Bits with 50 Total Step Sizes, Titanium Coated Unibits
- PREMIUM STEP BIT: Each unibit is constructed of industrial high-speed steel with a titanium nitride coating for durability and strength to punch and drill clean holes in materials like plastic, aluminum, wood, copper, stainless steel, and other types of sheet metal..
- STEP DRILL BIT FOR METAL: With a split point tip that accelerates cutting speed while preventing angled walking away from center line of bore, drilling holes in metal is fast, efficient, and clean..
- SPIRAL DESIGN: The two-flute spiral grooved design deburrs chip, dust and debris for clearance and smooth cutting. With 50 step sizes combined, each hole made with these step bits will be precise..
- QUICK-CHANGE: The 1/4-inch hex shank makes for easy, convenient, and quick stepper bit switches and is compatible with impact ready power tools..
- INCLUDES: Each bit set comes with 5 drill bits of a combined 50 sizes: Range is from 1/8” to 1-3/8”..
Check StockNEIKO 10174A Quick Change Spiral Grooved Step Drill Bit | 10 Step Drill Bit Sizes in One - 1/4 to 1-3/8 | High-Speed Steel and Titanium Nitride Coating | Two-Flute Design
- [QUALITY]: Made with heavy duty High Speed Steel for powerful punching and drilling of clean holes..
- [DURABLE]: Coated in HSS and Titanium nitride for maximum durability..
- [EFFICIENT]: 1/4 inch Quick Change Hex Shank to fit most pistol drills and drill presses securely..
- [CONVENIENT]: Two-Flute Spiral Grooved Design deburrs chip, dust, and debris for faster and smoother cutting..
- [SIZES]: 10 In One - 1/4, 3/8, 1/2", 5/8, 3/4", 7/8, 1, 1-1/8, 1-1/4, 1-3/8.
Check StockAzuno 60PCS Metric&SAE Tap and Die Set, Titanium Coated GCr15 Bearing Steel with T-Handle/Wrench/Gauge/Screwdriver in Storage Case, Master Threading Toolkit
- 【60pcs Titanium Coated Tap and Die】: Set includes 54 taps & dies, 1 die handle, 1 T-tap wrench, 2 screw-pitch Gauge, 1 screwdriver, 1 tap wrench. Constructed by quality GCr15 bearing steel with titanium coating that ensures higher durability in threading..
- 【Common Sizes in Metric & SAE】: 10MM Dies&Taps: 3x0.5,4x0.7,5x0.8,6x1.0,7x1.0,8x1.25,9x1.25,10x1.5,10x1.0,12x1.75.
- 10UNC Dies&Taps: 4-40,6-32,8-32,10-24,12-24,1/4,5/16,3/8,7/16,1/2.
- 6UNF Dies&Taps: 10-32,1/4,5/16,3/8,7/16,1/12.
- 【Performance and Durability】: CNC machined Tap and Dies made by industry-grade GCr15 bearing steel with pronounced hardness and balanced ductility. Titanium coating on the finish ensures higher durability on hard metal..
- 【Easy for Storage】: Comes with a heavy-duty storage case, convinient for storage and carrying. It has identified slot for each piece so that to keep neat and easy finding..
- 【Versatile Threading Tool Set】:This MASTER set is perfect for cutting and renewing external and internal threads to exact standards. Durable to process on hard metal such as alloy, steel and brass, for all-day performance in the shop or home project..
Check Stock