Top Tm Pro Trigger Module

FINDER 90.26 Relay Socket, 250V, 10A, DIN Rail

  • Output can be directly connected to microcontroller, through single chip microcomputer to detect the high and low level, thus to detect whether there is a vibration environment, call the police..
  • This module is compared with the normally open type vibration sensor module, vibration trigger for longer periods of time, can drive the relay module..
  • Product vibration, the vibration switch instantaneous disconnection, output the output high level, the green light is not bright.
  • Product no vibration, vibration switch is closed on state, the output terminal output low level, the green light is lit.
  • Used to trigger the effect of various vibration, theft alarm, intelligent car, earthquake alarm, motorcycle alarm, etc.
Check Stock

DIY Greeting Card Chip 120 Seconds Recordable Voice Sound Chip Module Built-in Button Battery for Gift Boxes, Invitations, Handmade Products

  • [120 SECONDS VOICE MODULE] You can record music or what you want to say according to your requirements for up to 120 seconds..
  • [TRIGGER BUTTON FUNCTION] Recordable voice module, trigger the button to play. When the playback is over, press the button to play again..
  • [BUILT-IN REPLACEABLE BUTTON BATTERY] The recordable voice module is built-in replaceable button battery for power supply, very easy to use..
  • [WIDE COMPACIBILITY] The recordable voice module is suitable for DIY homemade greeting cards, gift boxes, invitations, handmade products, etc..
  • [CAN BE REPEATED] The recording can be repeated, and each recording will overwrite the last recording..
Check Stock

X10 LM465 Lamp Control Module

  • Enables X10 remote control for a plug-in light.
  • Requires TM751 Transmitter. Lamp plugs into the module.
Check Stock

YWBL-WH Relay Module One Way 30A Optocoupler Isolation Relay Module High Power Relay High/Low Level Trigger YYG-2(5VDC)

  • ANTI-INTERFERENCE---Made of the high quality miniature optocoupler, the relay module is of anti-interference ability, stable performance.
  • STABLE AND RELIABLE---Adopting 9.5mm black barrier terminal and standard 30A terminal, the relay module is stable and reliable.
  • HIGH/LOW LEVEL TRIGGER---The high/low level trigger of the relay module can be switched.
  • DC5V/DC12V/DC24V---There are 3 styles for you: DC5V, DC12V, DC24V, you can choose one according to your preference.
  • MAIN FEATURE---Product Name: Optocoupler Isolation Relay Module.
  • Output Capability: AC 250V/30A, less than DC 30V/30A.
Check Stock

uxcell BWL100 100 mm Pull Rod Linear Position Displacement Sensor for Printer

  • Shipping list: AC 220V vibration sensor delay module, with ultra-high sensitivity vibration sensor..
  • AC 220V power supply ultra-high sensitivity vibration delay module plus relay module plus delay three-in-one module, vibration switch module Alarm trigger, with 1 vibration sensor. Relay does not have B1 normally closed end..
  • corridor delay switch, delay energy-saving products.
  • Supply voltage: AC 220V power supply, Current: greater than 100mA.
Check Stock

AEDIKO 10pcs 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 18650 Lithium Battery Charging Boost Mobile Power Protection PCB Board

  • 2A 5V Lithium Battery Charging Protection Module:Output Voltage: 5V.
  • Charging Voltage: DC 4.5V-5.5V (DC 5V Recommended).
  • MCU Users: if You Accept a Small Load KEY Can be Connected to the Microcontroller about 20s to Provide a Low Level Allows the Module to Continue Working. Trigger Mode: Low Level Trigger (Ground).
  • Protection Functions: 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module.Lithium Battery Protection Function:Over-Current Protection,Over-Voltage Protection, Over-Temperature Protection, Short Circuit Protection.
  • NOTE:The First Time the Load is Connected, Output is Automatically Turned On. If the Load is Less than 50MA, the Output will be Automatically Turned Off after 30s.
  • if the Load is Greater than 50MA, the Output Will be Automatically Turned On.
  • Application:2A 5V Module Widely Used for Mobile Power, Car Charging Retrofit,Driving Recorder Power Supply and Portable Devices Such As Mobile Phones and Tablets.
Check Stock

Beffkkip 4pcs 2A 5V Charge Discharge Integrated Module 3.7V/4.2V PCB Board Module for 18650 Lithium Battery Charging Boosting Mobile Power Board

  • 4 in 1 Charging + Discharging + Lithium Battery Protection + Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection..
  • MCU users, if you accept a small load KEY can be connected to the microcontroller about 20s to provide a low level allows the module to continue working. Trigger mode: low level trigger (ground).
  • In discharge mode (The charging mode KEY function is invalid), trigger the KEY port once to open the output.
  • continuously trigger the KEY port twice to close the output..
  • The first time the load is connected, the output is automatically turned on. If the load is less than 50MA, the output will be automatically turned off after 30 seconds.
  • if the load is greater than 50MA, the output will be automatically turned on..
  • Allow discharge while charging. (Note: At this time output voltage 4.7 / 5V).
Check Stock

Pyle Electronic Drum Set-Portable Powerful Kit w Machine for Beginners Touch Sensitive Drum Pads, MIDI Computer Connection, Quick Setup Roll-Up Design (Mac & PC Compatible) (PTEDK50)

  • ...et metronome and adjust tempo. The pro electronic drum kit module has 3.5mm AUX input jack and headphone jack for late-night self practice without disturbing others.
  • RESPONSIVE DYNAMICS: Enjoy professional sounding play, drumsticks soft and hard hits register accurately to trigger dynamic drum beats. Portable bateria electrica delivers the ultra-sensitive highly accurate response of an acoustic kit.
Check Stock

ACEIRMC HC-SR04 Ultrasonic Sensor Distance Module for Nano Robot XBee ZigBee by ElecRight（5pcs

  • HC-SR04 Ultrasonic Sensor Distance Module: using IO trigger for at least 10us high level signal.
  • This module has stable performance and accurate measurement distance..
  • Detection distance: 0.78~196 in/ (2cm~500cm).
  • This module is fully Compatible with GH-311 anti-theft module..
  • HC-SR04 Ultrasonic Sensor Distance Module for Nano Robot XBee ZigBee by ElecRight.
Check Stock

Ketron SD2 Sound Module

  • Dual-function module: envelope follower AND attenuverter / offset generator.
  • Envelope Follower: Use a guitar/microphone/phone etc to trigger envelopes and gates in your Eurorack system.
  • Attenuverter: Attenuverts your voltage sources up to two times in the positive or negative.
  • Offset Generator: Provides up to 5 volts in the positive or negative.
  • Specifications: Module width: 4HP, Module depth: 48mm. Current draw: +12V: 25mA, -12V: 18mA.
Check Stock

AEDIKO 4pcs Relay Module DC 5V Relay Switch 1 Channel Relay Board with Optocoupler Isolation Support High or Low Level Trigger

  • Fault-Tolerant Design: Fault Tolerant Design, Even if the Control Line is Broken, the Relay will not Operate.
  • All Interfaces of Relay can be Wired Out Through the Terminals Directly,Normally Open and Normally Closed.
  • Optocoupler Isolation:1 Channel Relay Board use Optocoupler Isolation that has Strong Driving Ability and Stable Performance ,The Isolation Circuit Prevent Damages to I / O Port by Relay Switch Current.
  • Jumper Design: The Relay Module has a Jumper That You Can Set Rather the Unit State Changes with High or Low Signal. Has Screw Terminals for Relay (NC,C,NO) and for Input.
  • Wide Application: DC 5V Relay Module Works Well with ARM /PIC /AVR /MCU/Raspberry/CNC Machine/ PS4 etc..
Check Stock

Mini Handheld Digital Oscilloscope, Support Persistence, PWM, 14 Type Measurement, 40MSa/s Sampling Rate, 18MHz Bandwidth, Signal Generator Frequency 500Khz, 2.4” LCD Display with 10X, 100X Probe

  • Faster Sampling Speed: Compared to the previous 138pro mini oscilloscope, this upgraded 154pro mini oscilloscope has a real-time sampling rate of 40MSa/s, a bandwidth of 18MHz, 500Khz signal generator frequency. Improve your work efficiency..
  • 2 Trigger Modes & One-key AUTO: The DIY oscilloscope kit configured 2 trigger modes, auto/normal. Support waveform parameter setting,such as time base, amplitude, etc. And Support waveform one-key AUTO to automatically adapt to the screen, no need to adjust parameters,convenient and accurate measurement..
  • There are 14 measurement options available: Frequency, P-eak to P-eak, Duty cycle, Amplitude, RMS, Average, Period, +Pulse width, -Pulse width, Max, Min,Top, Base..
  • Built-in High Voltage Protection: The handheld oscilloscope built-in high voltage protection module can withstand up to ±400V AC/DC voltage signal. And built-in 1000m-Ah high-quality battery, can be used continuously for about 6 hours after full charge..
  • Wide Applications: Ideal for the maintenance industry and the R&D education industry. It's very valuable for find ....
Check Stock