Top Tmc Vs Tmc2130

4PCS TMC2208 3D Printer Stepper Motor Driver TMC2208 V1.2 Stepstick Stepper Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps 1.4 MKS Gen Mega i3 Ender-3 Pro

  • TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision..
  • The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies.
  • these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing..
  • Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market..
  • With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter..
  • The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed)..
Check Stock

ANRANK UC2092AK USB Sync Data Charger Cable Cord for Tomtom XL XXL N14644 GO 920 930 720 GPS Black

  • Compatible with TOMTOM One GPS Navigator models.
  • 2 in1 solution to receive USB LT RDS-TMC traffic information on your device while charging it..
  • No need for extra wires and cables on the windscreen!.
  • Ideal to get traffic information in your Country or abroad (where TMC service is available)..
Check Stock

Red Antifreeze Coolant - 50/50-275 Gallon Tote

  • This item does NOT ship to residential, home business or farm addresses, please scroll down to confirm shipping details prior to purchase..
  • Heavy-Duty ELC Ethylene Glycol Nitrite-Free is an organic acid technology (OAT) antifreeze/coolant for heavy-duty diesel applications. It contains a proprietary inhibitor technology that is free of nitrite, phosphate, silicate and borate. The product provides year-round protection against freeze-ups, boil-overs and engine cooling system corrosion without the use of supplemental coolant additives (SCA’s).
  • Product contains less than 10% ethylene glycol and contains a bittering agent..
  • Meets the performance requirements of: TMC ATA RP 329, TMC ATA RP 338A, ASTM D6210, ASTM D3306.
Check Stock

TOMTOM USB RDS TMC Traffic Receiver Charger for XXL 530 535 540 545 550 WTE IQ Routes 5\ GPS Navigator (PN 4UUC1 4UUC.001.01)

  • Brand New Original TOMTOM Charger Traffic Receiver Kit.
  • Compatible with TOMTOM XXL Navigator models.
  • USB LT RDS-TMC traffic information on your GPS.
  • No need for extra wires and cables on the windscreen!.
  • Receive information in your Country or abroad (where TMC service is available)..
Check Stock

Maddog Tippmann TMC MAGFED Protective CO2 Paintball Gun Starter Package - Tan

  • ALL-IN-ONE PAINTBALL GUN PACKAGE! Tippmann TMC MAGFED .68 Caliber Paintball Marker with Maddog's Starter Protective CO2 Paintball Gun Accessory Kit.....
  • THE MOST REALISTIC MILSIM SCENARIO PAINTBALL GUN ON THE FIELD! Dual feed option: Go MagFed or Load Up a Traditional Paintball Hopper and Get the Best....
  • TIPPMANN TMC MAGFED .68 CALIBER SCENARIO PAINTBALL MARKER - Semi-Automatic - Adjustable from 250-325 FPS - Includes (2) 20 Round Spring Driven....
  • INDUSTRY STANDARD PAINTBALL ACCESSORIES - High Quality REFILLABLE 20 Ounce Aluminum CO2 Paintball Tank for approx. 800 - 1100 shots per fill (Tank....
  • TAKE THE PAIN OUT OF PAINTBALL! PLAY PROTECTED! Full Coverage - Face, Chest, Back, Neck, and Hand Protection! Don't sweat the competition in Maddog's....
Check Stock

Spyder Victor Paintball Marker - Gloss Red

  • Tippmann's latest .68 Caliber MagFed Extremely Authentic Milsim Styled Tactical Paintball Marker.
  • THE MOST REALISTIC MILSIM SCENARIO PAINTBALL GUN ON THE FIELD! Dual feed option: Go MagFed or Traditional Loader and Get the Best of Both Worlds in One Awesome Package! Perfect for Close Quarter Battles, Tactical Games, Woodsball, Etc! High Performance, Low Maintenance, Reliable, Fully Pnuematic, and Extremely Authentic Milsim Tactical Paintball Marker!.
  • TIPPMANN TMC MAGFED .68 CALIBER SCENARIO PAINTBALL MARKER - Semi-Automatic - Adjustable from 250-325 FPS - Includes (2) 20 Round Spring Driven Magazines - Dual Feed Option: Hopper or Magfed Design - 12" High Performance Barrel - Internal Stainless Steel Gas Line - Front and Rear Adjustable Sights - Built-in Picatinny Rails.
  • Tippmann's TMC MAGFED Paintball Marker comes with a 1-Year Manufacturer's Warranty, not to mention, Tippmann's DEDICATED Cerfified Technical Support Department Available as a Resource For You and Your Marker All Year Long!.
Check Stock

Inovat Replacement USB Computer PC Data Sync Transfer Charger Cable Cord for Tomtom XL XXL N14644 GO 920 930 720 GPS

  • Original TOMTOM Charger Traffic Receiver (Mini USB connection only, not compatible with any other TomTom models).
  • Compatible with TOMTOM XL 335 340 350 335TM 335T 340TM 340T 350T 350TM TM T M Routes GPS Navigator models.
  • 2 in1 solution to receive USB LT RDS-TMC traffic information on your device while charging it.
  • No need for extra wires and cables on the windscreen.
  • Ideal to get free traffic information in your Country or abroad (where TMC service is available)..
Check Stock

Ickiya MKS Gen L V2.1 3D Printer Control Board Motherboard, Open Source Marlin Support TMC2209/TMC2208/TMC2208/TFT35 V3.0/TFT35 E3/BL TOUCH/LCD12684 for Ramps 1.4 /Ramps 1.5/Ramps 1.6 3D Printer

  • ✅Integrate 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support A4988/TMC2209/TMC2208/TMC5160/DRV8825 stepper drivers.
  • ✅Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly..
  • ✅24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem..
  • ✅It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 /TFT32/TFT35/TFT50/TFT70 touch screen..
  • ✅The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive..
Check Stock

Maddog Heavy Duty Paintball Tank Remote Coil - Compressed Air (HPA) / CO2

  • Choose Quick Disconnect, Slidecheck, or Pro Push-Button Quick Disconnect.
  • Move the BULK weight of the tank OFF your marker and into a pouch!.
  • Designed to work with co2 tanks, 3000 psi, and 4500 psi HPA systems.
  • CA Adapter attaches to any paintball marker Including Tippmann TMC, 98, A5, X7, Cronus, Alpha Black, Alpha Black elite, TCR, Stryker, Stormer. Spyder Fenix, Victor, Agressor, Xtra, Compact, VS Series, JT, Brass Eagle and More.
  • Remote Works with all standard paintball tanks including HPA/Compressed Air, 13/3000, 26/3000, 35/3000, 48/3000, 62/3000, 45/4500, 50/4500, 68/4500, 70/4500, 80/4500, 88/4500 & 90/4500. Also Works with standard CO2 tanks 4oz, 9oz, 12oz, 16oz, 20oz and 24oz. And many Airsoft HPA Setups..
Check Stock

Maddog Tippmann TMC MAGFED Bronze CO2 Paintball Gun Starter Package - Black

  • ALL-IN-ONE PAINTBALL GUN PACKAGE! Tippmann TMC MAGFED .68 Caliber Paintball Marker with Maddog's Bronze CO2 Paintball Gun Accessory Package. Bronze CO2 Accessory Starter Kit Includes: Industry Standard 20 Oz. CO2 Paintball Tank (Tank Ships EMPTY - Must Be Filled Prior to Use. Brand/Color May Vary - Maddog, Empire, Tippmann, GI Sports, Valken, HK Army), 200 Round Paintball Loader, Safety Certified Anti-Fog Paintball Mask, and Barrel Squeegee (Paintballs Sold Separately)..
  • THE MOST REALISTIC MILSIM SCENARIO PAINTBALL GUN ON THE FIELD! Dual feed option: Go MagFed or Load Up a Traditional Paintball Hopper and Get the Best of Both Worlds in One Awesome Package! Perfect for Close Quarter Battles, Tactical Games, Woodsball, Etc! High Performance, Low Maintenance, Reliable, and Extremely Authentic Tactical Milsim Paintball Gun Marker! Includes (2) 20 Round Paintball Mags (paintballs sold separately).
  • TIPPMANN TMC MAGFED .68 CALIBER SCENARIO PAINTBALL MARKER - Semi-Automatic - Adjustable from 250-325 FPS - Includes (2) 20 Round Spring Driven Magazines - Dual Feed Option: Hopper or Magfed Design - 12" High Performance Barrel (Tippmann 98 Threads) - Internal Stainless Steel Gas Line - 5 Position Collapsible Support - Front and Rear Adjustable Sights - Integrated ....
Check Stock

BIGTREETECH SKR V1.4 Turbo Control Board 32bit for 3D Printer Compatible with TFT35 E3 V3.0.1/TFT70 Touch Screen Support TMC2209/TMC2208/TMC5160/TMC2130 for Most FDM 3D Printer (with 5*TMC2209)

  • ✨SKR V1.4 Turbo control board can supply power to TFT screen, BLtouch, Neo-pixel by plugging in an external DC5V power module.
  • in addition, I2C, SPI, WIFI interface is reserved to facilitate customer DIY..
  • ✨On-board TMC-driven SPI working mode and UART working mode, and the on-board DIAG function pins are convenient for customers to use, eliminating the complicated wiring process, which can be used by simply removing and inserting the jumper cap..
  • ✨Compare to other stepper motor driver in the market, our TMC2209 silent stepper driver generate lower heat and it has a large-area cooling position to lower the temperature. It driver can lower 30% heat than others stepper motor drivers even working last for a long time. With Passive cooling on a 10 hours print, they only hit 37℃..
  • ✨BIGTREETECH TMC2209 V1.2 is an ultra-silent motor driver IC for two-phase stepper motors, which adopts stealthChop2 Mute technology which reduces motor noise to the point of silence at low velocities to ensures noiseless operation, maximum efficiency and best motor torque. spreadCycle all....
Check Stock

Maddog Tippmann TMC MAGFED Titanium HPA Paintball Gun Marker Starter Kit - Black

  • ALL-IN-ONE PAINTBALL GUN PACKAGE! Tippmann TMC MAGFED .68 Caliber Paintball Marker with Maddog's Titanium Compressed Air HPA Paintball Gun Accessory Kit. Titanium HPA Package Includes: Industry Standard 48/3000 Compressed Air Paintball Tank (Ships EMPTY - Must Be Filled Prior to Use. Brand/Color May Vary - Maddog, Empire, Tippmann, GI Sports, Valken, HK Army), Paintball Loader, Safety Certified Anti-Fog Paintball Mask, 6+1 Paintball Harness, (6) Standard Paintball Pods, and Barrel Squeegee.
  • THE MOST REALISTIC MILSIM SCENARIO PAINTBALL GUN ON THE FIELD! Dual feed option: Go MagFed or Load Up a Traditional Paintball Hopper and Get the Best of Both Worlds in One Awesome Package! Perfect for Close Quarter Battles, Tactical Games, Woodsball, Etc! High Performance, Low Maintenance, Reliable, and Extremely Authentic Tactical Milsim Paintball Gun Marker! Includes (2) 20 Round Paintball Mags (paintballs sold separately).
  • TIPPMANN TMC MAGFED .68 CALIBER SCENARIO PAINTBALL MARKER - Semi-Automatic - Adjustable from 250-325 FPS - Includes (2) 20 Round Spring Driven Magazines - Dual Feed Option: Hopper or Magfed Design - 12" High Performance Barrel (Tippmann 98 Threads) - Internal Stainless Steel Gas Line - 5 Position Collapsible Support - Front and Rear Adjustable ....
Check Stock