Top To 1inch Exhaust Stack

Stainless Slide Intake for UDS 30/55 Gal and Kamado 20 21 23 inch Draft Door

  • 2" THREADED SMOKE STACK FITS DRUMS WITH 2" BUNG.
  • Includes damper blade. Simply thread into any 2" bung to install.
Check Stock

LavaLock BBQ Smoker Supply Uds Ugly Drum Parts Intake Teardrop Vent Damper 1-1/2 Flange for 55 Gallon Drum

  • 2" THREADED SMOKE STACK FITS DRUMS WITH 2" BUNG.
  • Includes damper blade. Simply thread into any 2" bung to install.
Check Stock

Zeda 80 Performance Bicycle Engine Kit with Dio Reed Valve & OKO Carb - Silver - Motorized Bike (36 Tooth)

  • Take your 2-stroke motorized biking to the next level with this complete Dio performance kit including the engine, mounting hardware, and stock exhaust pipe.
  • The included Dio reed valve, OKO carb, K&N style air filter (or optional velocity stack), and modified Dio cylinder round out this performance package that will yield tons of torque and increased speed.
  • For even more power and performance it can also be paired with our Zeda88 performance pipe (select from the drop down above).
  • or pick up a Dio Upgrade Kit for just $99.
  • Kit includes: 2.95 HP 2-stroke engine, modified Dio cylinder with piston, 21mm OKO flat side carburetor, 6 flap Dio reed valve, K&N style mesh air filter.
  • Performance parts: stainless steel allen bolts, enhanced balanced crank, upgraded bearings + 60% thicker crank case around bearings, stuffed crankcase, large intake port (40mm bolt hole width), round exhaust port 40mm crank stroke (more powerful, efficient, and reliable), type B piston (high wrist pin), long rod (89mm).
Check Stock

Denshine Class 100 (Fed 209E) Vertical Ventilation Laminar Flow Hood Air Flow Clean Bench Workstation 110V Vertical Flow Laminar Flow Hood Fan Air Clean Bench for Lab and Industry - Shipping from USA

  • Fume hood has a molded, one-piece outer polyethylene shell for durability and chemical-resistance, with a clear acrylic door panel that slides up and down on inside tracks.
  • Large body measures 30 x 20 x 42 inches (H x W x D), with a 14.2 x 34.5 inches (H x W) door opening.
  • Door positions include open, closed, or intermediate.
  • when in closed position, the sash remains slightly open to facilitate continuous air flow.
  • Exhaust stack connection has a 15 cm outer diameter (OD).
  • works with an exhaust system (not included) that draws free air at 350 cubic feet per minute (CFM).
Check Stock

TrippNT 50315 Polyethylene Fume Hood Shelf, 36\ Width x 8\ Height x 5\ Depth, 3', White

  • These corrosion-proof polypropylene exhaust hoods are designed to rest on the rear edge of tanks and draw a stream of air across the top of the tank away from the operator.
  • Slot dimensions are 3" height by 4" depth, 8" stack O.D., 1/4" material thickness.
  • Corrosion- proof and virtually maintenance-free.
  • Use in process operations such as dying, chemical processing, blacktop and hot mix processing, and leather tanning.
Check Stock

Ugly Drum Smoker Parts Kit Build Your own UDS Heavy Duty Expanded Basket w/ Stainless Grate Two flanged inlets 2 Exhaust LavaLockⓇ TH258 Thermometer

  • all hardware and sticker! (drum not included).
Check Stock

BBR Tuning Racing Series DIO Cylinder Body & High Performance 21mm OKO Carburetor Assembly

  • ...our build’s been looking for. A ported cylinder body with a high performance reed valve intake system, this race assembly was made for race engines in mind..
  • PORTED CYLINDER: Unlike other cylinders, the BBR Tuning Racing Series DIO Cylinder Body is ported to allow maximum fuel and air mixing within your motor. The exhaust port can fit nearly any performance muffler as well as any stock exhaust muffler you want to run, which the intake port is specifically designed to accept the reed valve assembly included with this kit.
  • BOOSTS POWER: With a 32mm opening, you’ll be able to fit hardcore racing carburetors like the BBR Tuning High Performance 2-Stroke OKO Style Carburetor without a single problem. With the right carburetor, this reed will deliver tons of fuel and air to your motor and give you higher speeds and even more torque..
  • COMPLETE KIT: The BBR Tuning Racing Series DIO Cylinder Body & Reed Assembly is paired with a 21mm OKO Race carburetor is racer’s dream setup- get ready for a bike that’ll scream whenever you hit the gas!.
  • INCLUDES: Modified BBR Tuning Racing Series DIO Cylinder Body BBR Tuning Racing Series 6 Flap Reed Assembly BBR Tuning 21mm OKO High Performance Carburetor Manifold 1x Racing Air Filter 1x Angled throttle cable retainer ....
Check Stock

Universal Bathroom Vent Fan Motor Kit Compatible with Nutone Broan 50CFM 120V 65878

  • ✽[Parts Number]: SM550 Universal Range Hood Vent Bathroom Fan Motor (120 V,3000 RPM),Replacement for Nutone Broan 65100 Bathroom Vent Fan Motor and....
  • ✽[Replaces Part #'s]:This motor is a Replacement for Nearly all 50 CFM Bathroom Exhaust Fans.Replaces No 65100, VFM100,....
  • ✽[Size]:Shaft approx. shaft = 3/16" x 1 3/4", wire length = 6" with 2-prong plug,Mounting studs 1 7/8" on center,5/8 Coil stack.
  • ✽[Highlights]:They are built to last and a popular choice among repair technicians and DIYers.Low noise design makes your life more comfortable.
  • ✽[Premium Quality] - The replacement part is made from durable high quality material and well-tested by the manufacturer.Non original aftermarket....
Check Stock

Rotary13B1 Datsun Jet Tag 1 inch x 5inches

  • DATSUN embroidered white letters on black fabric, with red and blue accent colors..
  • Black Merrowed Borders - Piece measures 1inch tall x 5 inches wide. (2.5cm x 12.7cm).
Check Stock

Hot Wheels 2020 Hw Metro Road Bandit, Red 7/250

  • Airlines: Philippine Airlines. Aircraft:B777..
  • Scale:1:400,Note:The base and stand will random shipments,you may got different from the picture..
  • Material:Die-cast metal,Weight:Approx 200g..
  • Model Dimension: [Nose - Tail]: Approx. 16cm(1inch=2.5cm),[Wingtip Across]: Approx. 14cm(1inch=2.5cm)..
  • Item includes box & model stand. Please refer to picture for reference.Authentic TANG DYNASTY plane model are packed in color box,please make sure there have TANG DYNASTY logo on the Box..
Check Stock

Vi Speller Gamle Plater

  • Large Serving Platters: With 3 sizes, Large-16 x9.5inch white porcelain serving platter.
  • High Quality: Delling Serving Platter made with high-quality ceramic, quality approved stoneware. Our 16" serving platters are fully glazed, which....
  • Microwave,Dishwasher-Oven Safe: Delling white plates have glazing process also makes them dishwasher use. Crafted to shine night after night through....
  • Class Style: Offered in classic white, the white fits all decorations and is the timeless classic.
  • Holiday serving dishes set come with protective....
  • What You Get: Delling Strong 16/14/12in Ceramic serving platter set of 3.
Check Stock

Cuque Motorcycle Exhaust Mid-Pipe Middle Pipe Full Exhaust System Vent Middle Pipe Stainless Steel Vent Middle Tube for Honda MSX125 2013-2015

  • 【Applicable models】Exhaust Mid Header Pipe,The exhaust central pipe is designed according to the exhaust pipe structure of a specific model. It can perfectly replace AFRICA TWIN CRF1000L ADV 2016 ‑2019 and other series models. The performance is stable. Please confirm the model before buying, so as to bring you a good Use experience..
  • 【Durable material】Exhaust Header Tube,It is made of high-quality stainless steel with a tapered tube with a thickness of 1 mm/0.04 inch. It is heat-resistant, high-temperature resistant, sturdy and not easily deformed, and has strong durability..
  • 【Applicable models】Exhaust Mid Header Pipe,The exhaust central pipe is designed according to the exhaust pipe structure of a specific model. It can perfectly replace AFRICA TWIN CRF1000L ADV 2016 ‑2019 and other series models. The performance is stable. Please confirm the model before buying, so as to bring you a good Use experi....
Check Stock