Top Toggle Bolt And Screw Kit

24PCS Toggle Bolt and Wing Nut Set, Camtek Toggle Bolt Zinc Plated Steel Phillips Round Head Toggle Bolt and Wing Nut Assortment Kit for Hanging Heavy Items on Drywall -3 Sizes(1/8'', 3/16'', 1/4'')

  • ✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
  • ✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • ✈【What You Get】- 24pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 10pcs 1/8inch, 8pcs 3/16inch and 6pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
  • ✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
  • ✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..
Check Stock

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M10x80mm 4pcs

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • A Revolution In Mounting - Our Heavy Duty 19-Piece Mounting Kit replaces the old fashioned toggle wings, wing anchor, molly bolts, and butterfly anchors system and can be pre-installed without using a bolt since our anchors won't fall off and into your wall..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • HEAVY DUTY DRYWALL MOUNTING KIT- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting e....
Check Stock

The Hillman Group 370054 Toggle Bolt, 3/16X3-Inch, 50-Pack

  • 【Sizes】There are three sizes selected for you, includes: 12 pieces 1/8 inch, 8 pieces 3/16 inch, and 4 pieces 1/4 inch. 24 pieces in total. Different sizes and enough quantities can meet your different longtime using..
  • 【Material】Our toggle bolts are made of zinc plated steel, uniform coating, strong adhesion and long service life, meanwhile, smooth surface because of using advanced automate production process to ensure processing accuracy, which make the product appearance is exquisite..
  • 【Unique Design】The spring can be folded into the drill hole without the need to unscrew the screw, and the installation is simple, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • 【Easy To Install】First, you need to drill a hole (big enough to thread through collapsed spring-loaded wings) and then poke these toggle bolts through the hole. At this time, the wings would release and clamp on the inside, then pull the bolt back down tight, please noted that you should leave enough room for wings to release. Finally, better use an electric screwdriver to screw the bolt in..
  • 【Wide Applications】It can be used for hollow brick, gypsum board, cement fiber b....
Check Stock

TOGGLER SNAPTOGGLE BCS Toggle Anchor, 304 Stainless Steel Channel, Made in US, 3/8\ to 2-1/2\ Grip Range, For 3/8\-16 UNC Fastener Size (Pack of 25)

  • Practical Kit: Zinc plated steel round head is used for hanging and fixing heavy objects. It is easy to use and bring more convenience to your life.
  • Premium Material: This toggle bolt and wing nut kit is made of high quality zinc plated steel which is strong and sturdy and offers good corrosion resistance and rust resistance in bad environment like high temperature, cold weather, and high humidity areas.
  • Wide compatibility: Widely used for hollow brick, gypsum board, cement fiber board, wood board and other hollow substrates, Suitable for installing light fixtures such as lamps, curtain rods, photo frames, coat racks, power switches.
  • Three Sizes: We have prepared 3 sizes of toggle bolt and wing nut kit, a complete kit, for you to meet different needs in your daily life.
  • What You Get: 1/8inch: 8pcs, 3/16inch: 8pcs, 1/4inch: 8Pcs, Lenink butterfly screws anchor drywall provide you with a more convenient driling way. Please feel free to contact us if you have any problem.
Check Stock

Toggle Anchor Bolts, New Design Hollow Wall Anchors 304 Stainless Steel Scissors Type Heavy Duty X Anchor M8x110mm, Pack of 4

  • ❤ WHAT YOU GET --- In this kit, We have prepared 3 sizes of Toggle Bolt and 3 sizes 1/8 inch Molly Bolt Drive for you to meet different needs in your daily life, including Toggle Bolt 1/8inch: 12pcs, 3/16inch: 12pcs, 1/4inch: 12Pcs. 1/8 Inch Molly Bolt Drive: 40Pcs. In total 76Pcs. High Quality can be used for a long time..
  • ❤ APPLICATION WIDE --- Used for fixing lamps, bookshelves, hanging cabinets, sinks, curtain chutes, bookshelf chutes, cable trenches, hanging flower pots, water heaters, coat racks, etc., suitable for lighter loads..
  • ❤ REASONABLE DESIGN --- The spring is folded to connect the larger wall thickness, which is elastically anchored to the product. In any case, it can automatically spring open by its spring force..
  • ❤ THE SMOOTH SURFACE --- The use of advanced equipment to automate the production process to ensure product processing accuracy, so the product appearance is exquisite, perfect workmanship..
  • ❤ GREAT VALUE --- Great toggle bolts at a much better price than big box stores. A must have for any handyman/woman / homeowner 's tool box. Convenient re-sealable plastic case. Hollow wall drive anchors - 1/8 in SD 39mm hollow wall drive anchors, 1/8 in SD 46mm hollow wall drive anchors,1/8 in SLD 59mm hollow wall drive anchors. Y....
Check Stock

TCH Hardware 10 Pack Toggle Bolt 3/16' x 2' + 4' Slotted Drive Screws - Drywall Sheet Rock Anchor Hollow Wall Butterfly Spring Loaded Wing

  • Steel slotted drive machine screw - 10-24 x 4".
  • Perfect for mounting on drywall and hollow walls.
  • Wings lock into place behind wall for superior holding power..
Check Stock

HELIFOUNER 24 Pieces Toggle Bolt and Wing Nut for Hanging Heavy Items on Drywall - 1/8 Inch 3/16Inch 1/4Inch

  • 【Sizes】There are three sizes selected for you, includes: 12 pieces 1/8 inch, 8 pieces 3/16 inch, and 4 pieces 1/4 inch. 24 pieces in total. Different sizes and enough quantities can meet your different longtime using..
  • 【Material】Our toggle bolts are made of zinc plated steel, uniform coating, strong adhesion and long service life, meanwhile, smooth surface because of using advanced automate production process to ensure processing accuracy, which make the product appearance is exquisite..
  • 【Unique Design】The spring can be folded into the drill hole without the need to unscrew the screw, and the installation is simple, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • 【Easy To Install】First, you need to drill a hole (big enough to thread through collapsed spring-loaded wings) and then poke these toggle bolts through the hole. At this time, the wings would release and clamp on the inside, then pull the bolt back down tight, please noted that you should leave enough room for wings to release. Finally, better use an electric screwdriver to screw the bolt in..
  • 【Wide Applications】It can be used for hollow brick, gypsum board, cement fiber b....
Check Stock

502pc Motherboard Standoffs Screw Kit | Basic Computer Screws Set for HDD Hard Drive, Case, Fan, Power Card, Graphics, Chassis, CD-ROM, ATX Case | for DIY & Repair

  • ... metric and imperial standoffs offering a 99% fit in all types of mother board installations. Other kits don’t include an imperial size standoff which is necessary in many installations. No need to buy multiple kits to try and find the right size fastener with Bolt Dropper’s..
  • {502 Piece Kit} The Bolt Dropper PC Screw Kit contains more of the most used screws, nuts, washers, and chassis hand twist screws than others. This way you don’t run out during your build or repair. Other kits contain only a few chassis screws for your case, but Bolt Dropper contains more than double of the next leading brand. The 530-piece kit not only contains more quantity of each but also contains a larger variety & color of fasteners to help you find the right fastener for the right job..
  • {High Quality Screws} High quality screws with deep cut drives prevent stripping and snapping as well as ensuring a secure fit. When you’re constantly upgrading and removing parts, a screw that doesn’t strip is essential. Bolt Dropper’s precision-made fasteners add a layer of confidence knowing you can add and remove them time and time again without worry of ever stripping a head or snapping a screw..
  • {Great for Computer Building & Repair} Guaranteed to fit 99% of all PC building....
Check Stock

WYBENZ Screw&Bolt Extractor Set and Left Drill Bit Kit, Easy Out Broken Lug Nut Extraction Socket Set for Damaged, Frozen,Studs,Rusted, Rounded-Off Bolts, Nuts & Screws(29PCS)

  • 29Pcs Easy Out Bolt Extractor Set: Left hand drill bit set is made of cobalt, nut and ez out screw extractor kit is made of high-hardness chromium-molybdenum steel material, and the reverse spiral groove is designed to buckle downward to provide maximum grip. Made In Taiwan!.
  • Save Time and Effort:The ez out extractor kit is a 3-in-1 screw & nut removal kit and drill bit kit. The stripping bolt remover and extractor easily removes damaged screws, studs, bolts and other accessories. Whether it‘s for car maintenance or daily use, it can provide you with great convenience..
  • Bolt Nut extractor Size: 1/4 inch, 5/16 inch (8 mm), 3/8 inch, 7/16 inch (11 mm), 1/2 inch, 9/16 inch (14 mm), 5/8 inch (16 mm), 11/16 inch, 3/4 inch (19 mm), Contains most common sizes..
  • Screw extractor set: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32". Drill bit kit: 1/8", 5/32", 3/16, 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 11/32". Each precision tool has a clear mark, screw extractor and drill bit kit Easy out rusty or damaged screws..
  • WYBENZ promises that customers can enjoy our friendly customer service (just send us an email via Amazon), and a free warranty within 365 days and Free Shipping. If you have any questions, please contact us.We also need you hel....
Check Stock

VITCIK Full Fairings Bolt Screw Kits for Kawasaki EX250R Ninja 250 EX-250R ZX250R 2008 2009 2010 2011 2012 Motorcycle Fastener CNC Aluminium Clips (Red & Silver)

  • FASTER SHIPPING: We will ship them within 24 hours. Normally it will take 3-10 business days for delivery (usually 5 days according to the delivery record).
  • Fasteners Bolt Kit Screws Fit For: Kawasaki EX250R Ninja 250 EX-250R ZX250R 2008 2009 2010 2011 2012..
  • Complete Fairing Bolt Kit Includes: Bolt Socket Screw(20+20+20+6+6 pieces) + Truss Screw(10+10 pieces) + Retainer(4+4+2 pieces) + Washer(60 pieces) + Speed Nut(10 pieces) + Lock Nut(40+20 pieces) + LIFETIME friendly customer service..
  • Total quantity of parts included in this kit is 232 pieces..
  • Full fairing bolt kit which contains all the hardware that is needed for the replacement of windscreen and main fairing pieces (front nose fairing, left/right fairing, front tire fender, tail fairing, v-panels, etc), whether the original or aftermarket ones..
Check Stock

Swpeet Assorted 60 Pcs Toggle Bolt and Wing Nut Kit for Hanging Heavy Items on Drywall - 1/8 Inch, 3/16Inch, 1/4Inch

  • ✅【HIGH QUALITY】These toggle bolt and wing nut are made of high quality zinc plated carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items..
  • ✅【WHAT YOU GET】This assortment kit includes 3 sizes. 1/4 inch (4pcs), 3/16 inch (8pcs), 1/8 inch (12pcs)..
  • ✅【UNIQUE DESIGN】There is spring in the wing nut, which can be folded into the drill hole and automatically spring open by its spring force. It can increase holding power, anti-rotation and with high stability..
  • ✅【WIDE APPLICATION】These work well on concrete walls, drywall surfaces, brick walls, sheetrock, plaster and wood. Great for hanging small pictures , heavy paintings, mirrors, clock, picture frames, towel rack and lightings..
  • ✅【PACKAGE】All toggle bolt and wing nut are nicely enclosed in a plastic case, which is easy to access, carry and store..
Check Stock

The Hillman Group 370057 Toggle Bolt, 3/16X4-Inch, 50-Pack

  • Durable toggle bolt great for hanging objects on hollow wall.
  • Features a slotted round head machine screw.
  • Pre-drilled hole required for installation.
Check Stock