Top Toggle Boltes

DaierTek SPST Waterproof Toggle Switch 12V DC 30A 125VAC 20A Marine Heavy Duty 2 Pin ON Off Spade Terminals for Automotive Car Boat -2 Pack

  • Feature: The SPST toggle switch waterproof is made of metal and bakelite Material. Delicate appearance with strong Construction. Look chic and high-end on your equipment..
  • Function: This toggle switch with 2 pin SPST design (single pole single throw), easy to turn ON OFF. The rating is 30A 12VDC.
  • Installation: Mounting hole size is 0.48 inches (12.2MM), with #250 Spade Terminals(6.35X0.8mm) for quick connection..
  • Waterproof Cap: Each automotive toggle switch will come with a waterproof boot cap, which makes it a waterproof toggle switch..
  • Application: This 2 pin ON OFF toggle switch is widely applied to various additional electric equipment inside and outside Auto Car Marine Boat, such as lights, chassis lamp, fog lamps, dome light, etc..
Check Stock

Morris Products 2 Pole Toggle Switch – Heavy Duty DPST On-Off 4 Screw Terminals – Solid Brass Nickel Plated Bushings - 100,000 Mechanical Life Cycles – 1/2 Mounting Hole 70100

  • HEAVY DUTY TOGGLE SWITCH: Know that you’re getting high quality with this Heavy Duty 2 Pole Toggle Switch featuring a dielectric strength of 1500V and 100,000 mechanical life cycles..
  • 4 SCREW TERMINALS: This DPST Toggle Switch offers on-off 4 screw terminals for ultimate performance..
  • VARIED AMPS: With a standard load rating of 20A 125VAC and 10A 277VAC, this 2 Pole Toggle Switch is the obvious choice for your electrical applications..
  • EXPANSIVE OPERATING TEMPERATURE: Each DPST toggle switch features a 1/2” mounting hole and operating temperatures from 32 to 185 degrees Fahrenheit..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock

Pack of 4 Wall Plate Outlet Switch Covers by SleekLighting | Decorative Copper | Variety of Styles Decorator/Duplex/Toggle / & Combo | Size 1 Gang Toggle

  • HIGH-QUALITY – Our brand of single Toggle switch wall plate is made of a high-quality metal and sturdy enough to survive any hard impact, and last a lifetime.
  • EASY TO INSTALL – This wall plate flexible is easy to install in just a few minute by an expert or DIY/ novice. It comes in 4 packs, 8 screws, and features a oil rubbed bronze finish..
  • COPPER FINISH – The finish enhances it resistant to dust, easy to clean, warp resistant with a smooth flat installation.
  • SPECIFICATION – This universal 1-gang Toggle switch wall plate is perfectly sized (4.9” H x 3.1"W) for a standard Toggle switch.
  • APPLICATIONS – The wall plate for switches is perfectly applicable to homes, offices, commercial and other building with any Toggle styled switch. If you want to upgrade the look of your standard wall Toggle switch this is the best choice for you.
Check Stock

SleekLighting Pack of 4 Wall Plate Outlet Switch Covers | Decorative Satin Nickel | Variety of Styles Decorator/Duplex/Toggle & Combo| Size 1 Gang Toggle

  • HIGH-QUALITY – Our brand of single Toggle switch wall plate is made of a high-quality metal and sturdy enough to survive any hard impact, and last a lifetime.
  • EASY TO INSTALL – This wall plate flexible is easy to install in just a few minute by an expert or DIY/ novice. It comes in 4 packs, 8 screws, and features a oil rubbed bronze finish..
  • SATIN NICKEL FINISH – The finish enhances it resistant to dust, easy to clean, warp resistant with a smooth flat installation.
  • SPECIFICATION – This universal 1-gang Toggle switch wall plate is perfectly sized (4.9” H x 3.1"W) for a standard Toggle switch.
  • APPLICATIONS – The wall plate for switches is perfectly applicable to homes, offices, commercial and other building with any Toggle styled switch. If you want to upgrade the look of your standard wall Toggle switch this is the best choice for you.
Check Stock

SleekLighting Pack of 4 Wall Plate Outlet Switch Covers | Decorative oil rubbed bronze | Variety of Styles: Decorator/Duplex/Toggle / & Combo | Size: 1 Gang Toggle

  • HIGH-QUALITY – Our brand of single Toggle switch wall plate is made of a high-quality metal and sturdy enough to survive any hard impact, and last a lifetime..
  • EASY TO INSTALL – This wall plate flexible is easy to install in just a few minute by an expert or DIY/ novice. It comes in 4 packs, 8 screws, and features a oil rubbed bronze finish.
  • OIL RUBBED BRONZE FINISH – The finish enhances it resistant to dust, easy to clean, warp resistant with a smooth flat installation..
  • SPECIFICATION – This universal 1-gang Toggle switch wall plate is perfectly sized (4.9” H x 3.1"W) for a standard Toggle switch..
  • APPLICATIONS – The wall plate for switches is perfectly applicable to homes, offices, commercial and other building with any Toggle styled switch. If you want to upgrade the look of your standard wall Toggle switch this is the best choice for you..
Check Stock

Art Plates - Double Gang Toggle Switch/Wall Plate - Sea Shells and Star Fish in Ocean Beach Tide Pool

  • Made in the USA: Sea Shells and Star Fish in Ocean Beach Tide Pool Decorative Printed Two Gang Toggle Wall Plate. Image printed on a solid metal 2 Gang Double Toggle Switch Plate Cover..
  • Two Gang Toggle Switch Plate Cover - Size: 4.5 x 4.57 - (Standard Size).
  • Decorative design is directly printed on metal switch plate. Made in USA by American workers. Ships from the USA..
  • UV cured, high gloss finish, protects from abrasions and scratches.
  • Decorative painted 2 Gang Toggle Switch Plate Cover..
Check Stock

260 Pieces Toggle Jewelry Clasp Sets Include 60 Pairs Alloy Toggle Clasps Connectors Metal Bar and Ring Clasps with 200 Pieces Open Rings for Jewelry Making (Gold, Silver)

  • Sufficient quantity: you will receive 60 pairs of alloy toggle clasps connectors and 200 pieces of open ring, 260 pieces in total.
  • Various rings of toggle jewelry clasp sets offer you different choices and sufficient quantity can meet your DIY requirements.
  • Detailed size information: each toggle clasp measures approx. 0.51 x 0.67 inch/ 13 x 17 mm, metal bar is about 0.12 x 0.79 inch/ 3 x 20 mm, and the open ring measures approx. 0.32 inch/ 8 mm in diameter.
  • Quite suitable for your many necklaces or bracelets.
  • Reliable material: our toggle bracelet clasp set is taken from alloy, lightweight and delicate, hard and not easy to break.
  • It is not fade easily and long service life, the smooth surface gives you a comfortable hand touching.
  • You don't need to worry about its quality issues within a short time.
  • Easy to use: the sizes of metal bar, ring clasp and open ring make the connecting process smoother on your hand, and the round design of ring clasp can reduce hand pressure, so you do not need to worry about the toggle clasp set would be inconvenient to use.
  • Multipurpose: as a kind of metal connector, the toggle clasp is an ideal choice for those who may have difficulty in putting on a necklace or bracelet with a traditional small clasp.
Check Stock

Morris Products Momentary Contact Toggle Switch – Heavy Duty DPDT On -Off- On 6 Quick Connect Spade Terminals – 100,000 Mechanical Life Cycles – CURus Listed – 1.30” x .76” x .86”

  • HEAVY DUTY TOGGLE SWITCH: Know that you’re getting high quality with this Heavy Duty Momentary Contact Toggle Switch featuring a dielectric strength of 1500V and 100,000 mechanical life cycles..
  • 6 QUICK CONNECT SPADE TERMINALS: This large DPDT Toggle Switch is ideal for motor control and tool applications with (On)-Off-(On) 6 screw terminals for ultimate performance..
  • VARIED AMPS: With a standard load rating of 20A 125VAC and 10A 277VAC, this Momentary Contact Toggle Switch is the obvious choice for your electrical applications..
  • EXPANSIVE OPERATING TEMPERATURE: Each large DPDT toggle switch features a 1/2” mounting hole and operating temperatures from 32 to 185 degrees Fahrenheit..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock

Legrand - Pass & Seymour T600LIV Lighted Toggle Dimmer Switch, 600-watt Single Pole Dimmer, Easy Install, Ivory

  • LIGHTED TOGGLE DIMMER SWITCH: Features a toggle switch to turn lights on/off or to preset level and a small slide control to brighten/dim lights to suit any activity.
  • EASY INSTALLATION: Exclusive, screw-pressure-plate back wire terminals eliminates wire nuts.
  • DURABLE LIGHT SWITCH: Tough, impact-resistant thermoplastic housing..
  • AVAILABLE COLOR: Legrand toggle dimmer switches are available in Ivory, Light Almond and White.
  • LIGHT DIMMER SWITCH: Power-failure memory dimmer and light switch.
  • SUPERIOR HEAT MANAGEMENT: No time wasting break off tabs.
  • DIMENSIONS: 1.8 x 3.8 x 5.9 inches and Type: Incandescent Toggle.
Check Stock

REDOVANT 10Pack Black Toggle Latch Clamp 300lbs Capacity Adjustable Pull Latch Clamp Metal Quick Release Smoker Door Latch Heavy Duty Toggle Clamps for Lid Jig Tool Boxes Case Black Draw Latch

  • DURABLE BLACK TOGGLE LATCH: Metal pull latch clamp made of high quality galvanized metal material with black coated, rust-resistant and corrosion....
  • Heavy Duty PULL ACTION TOGGLE CLAMP: 300lbs Holding Capacity, stronger than most toggle clamp latch, multipurpose quick latch clamp for cabinet doors,....
  • UNIQUE BLACK PLASTIC HANDLE COVERS: Quick release latch has the oil and stain resistant black plastic cover handle, safe and comfortable operation for....
  • ADJUSTALE TOGGLE CLAMP LATCH: With a adjustable arm design, you can freely adjustable doors closed tightly or loosely as you like.
  • WIDELY RANGE OF USAGE: Pull toggle clamps are widely used for cabinet, door, box, case with no lock or broken handles, perfectly fit for small tools....
Check Stock

Accessbuy Toggle Latch Clamp,U Bolt Quick Release Toggle Latch,360Lbs Holding Capacity Adjustable Small Latch Hardware for Freezer Door,Storage Boxes,Smoker Lid,Tool Box Case,Trunk 4.75 Inch 4 Pack

  • 【MATERIAL】：Our toggle clamp latches are made of galvanized carbon steel, which is strong and of high quality. Strong carbon steel won’t be out....
  • [HOLDING CAPACITY AND SIZE】: Holding Capacity 160Kg/360 Lbs. Our heavy duty toggle latch clamp is of small size. If you need another size or....
  • 【EASILY INSTALLED AND ADJUSTABLE】:Our U bolt toggle latch is very convenient to be installed. Just fix the hook and the clamp latch, and then....
  • 【WIDE APPLICETION】:Our quick release toggle clamp latch can be used in many fields ,such as for locking doors, cabinet door, freezer door,storage....
  • 【PACKAGE INCLUDES 】:8 packs adjustable toggle clamp latch hardware.If there’s any problem, please feel free contact us .We can offer a....
Check Stock

KURUI Heavy Duty Hollow Wall Anchors for Drywall 24Pc Toggle Bolts and Wing Nut Kit Hollow Drywall Anchors and Screws Assortment Set 3 Sizes Butterfly Anchors 1/8in 3/16in 1/4in

  • MULTIPLE SIZE OPTIONS – This drywall anchors and wing nut kit contains toggle bolts set in 3 different sizes – 1/8in, 3/16in, 1/4in for your choice according to your actual mounting and load bearing requirements..
  • PREMIUM MATERIAL, EXCELLENT PERFORMANCE – The toggle bolts and nuts in each size are constructed with new high-strength steel, which ensures outstanding strength and hardness. Finished with multi-layer galvanization, these drywall anchors and nuts are rustproof and corrosion resistant..
  • FOR HEAVY-DUTY HANGING TASKS – The drywall anchors are designed with spreading butterfly wing nuts, when knocked in hollow walls the wings will automatically spread to increase the area of the thrust surface, which enhances the load bearing of the toggle bolts for heavy-duty hanging tasks..
  • WIDELY APPLICABLE – Our toggle bolts assortment kit with multiple size options allows you to easily hang items such as television, painting, mirror, shelves, pictures onto hollow walls safely and with ease..
  • WHAT YOU GET – The package includes 12pcs 1/8in toggle bolts and nuts set, 6pcs 3/16in drywall anchors and nuts set, 4pcs 1/4in heavy-duty wall anchors, all the piece are well packaged in a beautiful clear plastic box. If you have any question about this toggl....
Check Stock