Top Toggle Bolts For Tv Mounts

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M10x80mm 4pcs

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • A Revolution In Mounting - Our Heavy Duty 19-Piece Mounting Kit replaces the old fashioned toggle wings, wing anchor, molly bolts, and butterfly anchors system and can be pre-installed without using a bolt since our anchors won't fall off and into your wall..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • HEAVY DUTY DRYWALL MOUNTING KIT- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting e....
Check Stock

Kanto LX600SW Full-Motion Steel Stud TV Mount with SNAPTOGGLE® Heavy-Duty Toggle Bolts for 34\ to 65\ TVs | for Metal Studs ONLY

  • EASY INSTALLATION - Capable of supporting up to 100 lb., the LX600SW can be securely mounted to steel studs up to 16” apart..
  • IMPROVED VIEWING - Heavy-duty articulating arms allow you to swivel your TV 45° in either direction and tilt it -3° to +15° to achieve the best viewing angle..
  • LOW-PROFILE DESIGN - The low-profile design of the LX600SW allows your TV to sit 2.2” from the wall when fully retracted..
  • CLEAN SETUP - Cable management clips are provided to conveniently route your cables, while plastic wall plate covers hide any sign of installation..
  • EVERYTHING YOU NEED - To ensure a secure installation into steel studs, a labeled hardware bag is provided with all the SNAPTOGGLE Heavy-Duty Toggle Bolts, hardware, washers and spacers you’ll need to safely mount your TV into steel studs..
Check Stock

Kanto PMX700 Pro Series Full Motion Articulating TV Wall Mount for 42-inch to 100-inch TVs | Adjustable Positioning | Integrated Cable Management | Toolless Tilt

  • HORIZONTAL OFFSET – All PMX mounts feature a segmented design that allows the arm assembly to be easily removed and positioned, independent of the wall plate. This setup makes it easier to center your television, regardless of the location of the studs..
  • EASY INSTALLATION – Installing a PMX TV mount is quick and easy. Weighing less than 10 pounds, the wall plate can be installed unassisted. The arm assembly can then be hooked into place before securing it with the provided hardware..
  • TOOLLESS TILT – The PMX series features a specially designed tilt mechanism that allows for precise adjustments to be made without the need of tools. Set the tension to allow for finger-tip adjustments, or lock it in place at the desired angle..
  • SUPERIOR EXTENSION – This wall mount is made from solid steel and has heavy-duty wishbone arms that allow maximum extension and support, even for larger televisions..
  • CONVENIENT BOLT PACK – The PMX700, along with the other TV mounts in the PMX Series, is carefully packaged with all the lag bolts, anchors, washers, and spacers needed for both wood studs and concrete walls..
Check Stock

Outdoor Waterproof and Weatherproof TV Cover for 55 inch Outside Flat Screen TV - Cover Size 52''W x 31''H x 5.5''D

  • ✔【PERFECT FIT 100% COVERED - DIMENSION】：The outdoor tv cover measures 42 (W) x 26.5 (H)x 4.5 (D)inch, designed to protect 40" to 42" flat Screens,TV Covers work with practically most TV mounts/ceiling and stands.Please measure your TV first to determine the suitable tv cover size. It also can be used as monitor cover..
  • ✔【EXTREMELY DURABLE & HEAVY DUTY MATERIAL】：This TV cover is made of 600 denier 100% polyester canvas fabric with U.V resistant finish, which makes the cover perfect for a long time use so you can maximizethe lifespan of your TV.【EASY TO INSTALL 】: Slip it over your flat TV and seal with velcro enclosures at the bottom and back. This TV screen protector fits very well along every side of your TV set including the bottom and provides the best protection for your outdoor television..
  • ✔【WATERPROOF & DUSTPROOF& WEATHERPROOF】：Television screen protector provides year-round protection for LED, LCD, Flat Screen TV. Effectively defending your outdoor television from water, dust, UV rays. This weather proof protector is the most compatible with all kinds of Television set mounts and stands so you can bring your entertainment outside..
  • ✔【FREE microfiber cloth as a BONUS】: Microfiber cloth can help you clean your Tel....
Check Stock

Hilitchi 122 Piece Plastic Self Drilling Drywall Hollow-Wall Anchor Molly Bolt Toggle Bolt with Screws Kit

  • This anchor set is perfect for mounting a wide variety of objects in drywall and other surfaces where simple fasteners are impractical..
  • Set includes plastic self drilling hollow-wall anchor, molly bolt, toggle bolt with self-tapping screws.
  • The ribs on the plastic anchors prevent the anchor from turning in the hole during installation.
  • The molly bolts Hollow wall anchors with pointed ends can pierce drywall using just a hammer.
  • These toggle bolts are anchors for use in hollow walls and hollow masonry applications.
Check Stock

Toggle Bolt HSCGIN 24PCS M4 Stainless Steel Toggle Bolt and Wing Nut Kit Round Head Butterfly Drywall Anchor Toggle Wing Nut Bolt

  • Toggle Bolt and Wing Nut Kit. Color: Silver. Material: Stainless Steel..
  • Sturdy and well-made: high quality stainless steel anchors, environmentally friendly materials. Stainless steel can be used in wet environments and will last for a long time. We offer great toggle bolt kits..
  • How to apply this kit: First, you'll need to drill a hole (large enough to go through the folded spring wings), then thread these toggle bolts through the hole. At this point the wings are released and clamped inside, then the bolts are pulled down to tighten, taking care to leave enough room for the wings to loosen. Finally, it is best to use an electric screwdriver to screw in the screws..
  • Wide compatibility: widely used in hollow substrates such as hollow brick, gypsum board, fiber cement board, wood board, etc., suitable for installing lamps, curtain rods, photo frames, coat racks, power switches and other lamps..
Check Stock

Mounting Dream Outdoor TV Cover Weatherproof with Bottom Cover for 30-32 inch TV, Waterproof and Dustproof TV Screen Protectors with Remote Control Pocket for Outside LED, LCD, OLED Flat Screen TVs

  • [UNIVERSAL COMPATIBILITY] Dimension: 30″ Wx 20″ H x 4.5″ D, fits for most 30″-32″ TV. TV Covers work with practically most TV mounts/ceiling and stands. Please check your TV measurement to ensure compatibility!.
  • [WEATHERPROOF&DUSTPROOF] Television screen protector provides year-round protection for LED, LCD, OLED Flat Screen TV. Effectively defending your outdoor television from water, dust, UV rays and bird droppings. The best choice to extend the life of your TV..
  • [100% COVERED] Outside TV covers with bottom cover and high quality industrial velcro straps which can securely seal the entire TV. Remote control pocket help to storage of your remote control. The TV cover can’t lift the front panel to view the TV for heat dissipation reasons..
  • [HIGH QUALITY] Material: Polyester + PVC. Waterproof material provides 360 degrees protection for your outdoor TV..
  • [TV Mount Compatibility] Fits most universial full motionTV mounts , tilting TV wall mounts ,TV ceiling mounts and TV stands.
Check Stock

Tool-less Wall Mount Distributed DSL Filter by Siecor

  • UNIVERSAL TV MOUNT: TV wall mount fits for most of 32-55" TVs up to 99 LBS, with max VESA of 400mm x 400mm/16" x 16" mounting holes spacing..
  • UPGRADE VIEWING EXPERIENCE: This full motion TV mount tilts TV up 5° and down 15° to reduce glare, swivels TV left or right according to your seat....
  • EASY INSTALLATION: TV wall mounts with clear instruction and hardware in pre-labeled bags. +/-3° post-installation adjustment allows perfect TV....
  • HEAVY-DUTY UNIT: TV wall mount swivel and tilt designed with 6 articulating arms. The technology of robot welding makes this wall mount TV bracket....
  • US-BASED CUSTOMER SUPPORT: We are glad to answer your pre-purchase and installation questions about TV mounts. Mounting Dream TV wall mounts are NOT....
Check Stock

Outdoor TV Cover 55' - 58' - with Bottom Cover - 600D Water-Resistant and Dust-Resistant Material- Fits Your TV Better

  • UNIVERSAL COMPATABILITY – Works with practically all TV mounts/brackets on the market including low profile, fixed, tilting, full motion/swivel single-arm wall mounts, double-arm mounts, ceiling mounts and rolling TV stands.
  • FITS FLAT SCREEN TV’s AND DISPLAYS – Measuring 54 x 35 x 4 inches. Please check your TV measurement to ensure compatibility. Our TV Cover is designed with features to speed installation, which also has a cover for your remote control.
  • DURABLE 600D MATERIAL-Szblnsm TV cover is made of strong 600D Oxford cloth material. Compared with other non-600D materials, 600D is thicker, has a longer life and better waterproof performance.
  • 100% COVERED – Double stitched edges to ensure maximum strength, provides the best protection for your outdoor television. Soft liner prevents TV screen from scraping. Openings are with Velcro straps that are very durable compared to zippers.
  • SATISFACTORY SERVICE – To ensure your shopping experience, if for any reason you don’t like this outdoor TV cover, we will provide you with an unconditional refund or exchange.
Check Stock

Mounting Dream TV Wall Mount for Most 26-55 TVs TV Mount Full Motion with Swivel Articulating Arm Perfect Center Design Wall Mount TV Bracket up to VESA 400x400mm and 77 lbs Loading MD2418-MX

  • ...struction, complete mounting wall mount with TV bracket in less than 30 minutes. Also, most of necessary hardware, like TV screws, bolts, washers, spacers and etc., is in pre-labeled bag, and the bubble level will be of great help for installation. (NOTE: Concrete anchors will be sent separately per request. Our TV mounts are not suitable for dry wall alone!).
  • [Responsive Customer Service] Our US-based customer service experts are available 7 days/week. Welcome to ask them any issue of mounting bracket use and TV wall hanger installation. Our TV mount is 10-year warranted! Please check the VESA, TV weight and possible blocked input before buying.
Check Stock

Mounting Dream Tilting TV Mounts for Most 26-55 Inch LED, LCD TVs up to VESA 400 x 400mm and 88 LBS Loading Capacity, TV Wall Mount with Unique Strap Design for Easily Lock and Release MD2268-MK

  • Universal Design: Tilt TV mounts for most 26-55 inch TVs weighing up to 88 lbs. Compatible VESA/mounting holes spacing ranges from 75X75mm (3"x3") to 400x400mm (16"x16"). Please check the TV VESA, TV weight, wall type and possible blocked input before purchasing..
  • Saving Space Greatly: Tilt TV mounts with 1.5’’ slim profile wall design, not only can give you a stylish appearance, but also save your space greatly..
  • Say Goodbye to Screen Glare: Tilt TV mounts can tilt your TV forward 8° to reduce the glare from light, you can get the best viewing effect with the most comfortable posture..
  • Easy Installation: Tilt TV mounts is a one-piece wall plate design. Comes with decent instruction and necessary hardware for both TV and wall installation. Also included Allen key and bubble level. Concrete anchors will be sent per request. (Anchor Size: φ10x50mm).
  • World-class Customer Service: Our US based customer service experts are always available to help. Backed up by our leading 10-year warranty and service! If you need 24-inch wall mounts, please check model MD2268-LK..
Check Stock

The Hillman Group 370039 Toggle Bolt, 1/8X2-Inch, 50-Pack

  • Durable toggle bolt great for hanging and fixing objects on hollow wall..
  • Size: 1/4x3-in (1/4 inch bolt diameter, 3 inch long). Requires a 3/4" drill bit..
  • Zinc-plated carbon steel to resist corrosion in wet environments.
  • Package: 8 pieces toggle bolts,comes with spring-action wings and instruction..
Check Stock