Top Toggle Wing

Lenink 24 Pcs Toggle Bolt and Wing Nut Kit, Zinc Plated Steel Round Head Butterfly Drywall Anchor 1/4\ 3/16\ 1/8\ for Hanging Lamps, Curtain Rods, Photo Frames

  • ♛【What You Get】: In this toggle bolt kit, it include three most used size which are 1/8'' x 30pcs, 3/16'' x 20pcs, 1/4'' x 10pcs total 60pcs are packed in a durable plastic box, convenient for your use and storage..
  • ♛【Product Material】: All the toggle bolts are made of high quality carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items. Zinc plated on the surface make the product appearance is exquisite..
  • ♛【Spring Wing Design】: Collapsible spring-loaded wings desigh allows you to fold the wings so that they can be placed in the drilled hole. The wings will open behind the plasterboard to provide a reliable fixation..
  • ♛【Easy to Install】: First pre-drilled hole for installation, and then poke these toggle bolts through the hole. Then pull the bolt back down tight, please noted that you should leave enough room for wings to release. Finally, use an screwdriver to screw the bolt in..
  • ♛【Wide Application】: These Toggle bolts can be widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches..
Check Stock

Toggle Bolt HSCGIN 24PCS M4 Stainless Steel Toggle Bolt and Wing Nut Kit Round Head Butterfly Drywall Anchor Toggle Wing Nut Bolt

  • Toggle Bolt and Wing Nut Kit. Color: Silver. Material: Stainless Steel..
  • Sturdy and well-made: high quality stainless steel anchors, environmentally friendly materials. Stainless steel can be used in wet environments and will last for a long time. We offer great toggle bolt kits..
  • How to apply this kit: First, you'll need to drill a hole (large enough to go through the folded spring wings), then thread these toggle bolts through the hole. At this point the wings are released and clamped inside, then the bolts are pulled down to tighten, taking care to leave enough room for the wings to loosen. Finally, it is best to use an electric screwdriver to screw in the screws..
  • Wide compatibility: widely used in hollow substrates such as hollow brick, gypsum board, fiber cement board, wood board, etc., suitable for installing lamps, curtain rods, photo frames, coat racks, power switches and other lamps..
Check Stock

48PCS Toggle Bolt and Wing Nut Set Camtek Toggle Bolt Zinc Plated Steel Phillips Round Head Toggle Bolt and Wing Nut Assortment Kit for Hanging Heavy Items on Drywall -3 Sizes 1/8 3/16 1/4

  • ✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
  • ✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • ✈【What You Get】- 48pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 20pcs 1/8inch, 16pcs 3/16inch and 12pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
  • ✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
  • ✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..
Check Stock

24PCS Toggle Bolt and Wing Nut Set, Camtek Toggle Bolt Zinc Plated Steel Phillips Round Head Toggle Bolt and Wing Nut Assortment Kit for Hanging Heavy Items on Drywall -3 Sizes(1/8'', 3/16'', 1/4'')

  • ✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
  • ✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • ✈【What You Get】- 24pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 10pcs 1/8inch, 8pcs 3/16inch and 6pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
  • ✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
  • ✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..
Check Stock

CondoMounts Heavy Duty 19-Piece 90lbs NO Stud Drywall or Metal Stud Mounting Kit for TV Frame TV No Gap Mount Mounting kit.

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • FRAME TV MOUNTING KIT : Perfect for Mounting Frame TV Mount directly on drywall without the need for studs. 3/16 screws fit frame tv NO gap wall mount..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • FULL PACKAGE- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting experience..
Check Stock

The Hillman Group 372514 Mini Toggle Bolt, 5/16 X 4-Inch, 10-Pack

  • Package includes 20 pcs toggle bolt and wing nut kits..
Check Stock

BokWin 4Pcs Small Butterfly Twist Latch with Keeper, Twist Latch, Padlockable Latches for Case Box

  • 【Package Included】: 4 x Padlockable Latches.
  • 【Premium Quality】: Butterfly twist latch made of high quality Iron material, it is durable, stable and rust resistant. It can load carry the limit of 2000N/450lbs tension..
  • 【Widely Application】: Butterfly Toggle Latch used in the various types of flight case, road case, microphone box, multi-function case, wooden box, aluminum tool case, photographic equipment box, etc..
  • 【Easy to Use】: Just put Locked fasteners flat to the case and locks down the wing. Easy operation actuated by fingertip pressure on the wing - 180 degree turn locks and unlocks the unit..
  • 【Quality After-sale Service】: Satisfying customers is BokWin's top priority. If you do not 100% satisfied with our products or if you have any questions, you can contact us anytime. BokWin would solve all the problems to your satisfaction. FREE REPLACEMENT or REFUND within 90days..
Check Stock

3/16 x 4 Toggle Bolts/Round Head/Combo Drive/Steel/Zinc/Anchor Size 3/16 / Screw Size 10-24 x 4 / Drill Bit/Hole Size 1/2 Carton 50 pcs

  • Light-duty, single use anchor or use in hollow block or drywall.
  • Wing: C1008-1010 or equivalent cold-rolled steel.
Check Stock

3/16 x 5 Toggle Bolts/Round Head/Combo Drive/Steel/Zinc/Anchor Size 3/16 / Screw Size 10-24 x 5 / Drill Bit/Hole Size 1/2 Carton 50 pcs

  • Light-duty, single use anchor or use in hollow block or drywall.
  • Wing: C1008-1010 or equivalent cold-rolled steel.
Check Stock

3/8 x 4 Toggle Bolts/Round Head/Combo Drive/Steel/Zinc/Anchor Size 3/8 / Screw Size 3/8-16 x 4 / Drill Bit/Hole Size 7/8 Carton 25 pcs

  • Light-duty, single use anchor or use in hollow block or drywall.
  • Wing: C1008-1010 or equivalent cold-rolled steel.
Check Stock

3/8 x 3 Toggle Bolts/Round Head/Combo Drive/Steel/Zinc/Anchor Size 3/8 / Screw Size 3/8-16 x 3 / Drill Bit/Hole Size 7/8 Carton 25 pcs

  • Light-duty, single use anchor or use in hollow block or drywall.
  • Wing: C1008-1010 or equivalent cold-rolled steel.
Check Stock

3/8 x 5 Toggle Bolts/Round Head/Combo Drive/Steel/Zinc/Anchor Size 3/8 / Screw Size 3/8-16 x 5 / Drill Bit/Hole Size 7/8 Carton 25 pcs

  • Light-duty, single use anchor or use in hollow block or drywall.
  • Wing: C1008-1010 or equivalent cold-rolled steel.
Check Stock