Top Toilet Tank Valve

Danco HYR460 Hydroright HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Push Btton Handle, White

  • WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp.
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
  • DUAL-FLUSH LIGHT-TOUCH BUTTON UNIQUE SPLIT HANDLE DESIGN: The short center button is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push button at end is the Full Flush that uses the normal amount of water for solids.
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
  • HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes – tank removal not required.
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flu....
Check Stock

TOTO MS854114E#11 Eco Ultramax Elongated One Piece Toilet, Colonial White

  • High-profile two-piece elongated toilet with soft close seat.
  • E-Max 1.28 GPF water savings flushing system is a quiet and powerful, with commercial grade flushing performance.
  • Slow closing seat and lid action reduces the chance of injury and eliminates annoying seat slam.
  • Wide 3-Inch flush valve is 125-Percent larger than conventional 2-Inch flush valves.
  • Includes: toilet tank, bowl, soft close seat, and mounting hardware. Purchase separately: wax ring, toilet mounting bolts, and water supply lines.
  • E-Max Flushing System (1.28 Gpf/4.8 Lpf).
  • Fast Flush: Wide 3-Inch flush valve is 125 percent larger than conventional 2-Inch flush valves..
  • Wider, 2-1/8-Inch computer designed, fully glazed trapway.
  • Length 28-Inch, Bowl Rim Height 14-1/2-Inch, Seat Height 15-Inch, Tank Height 27-1/2-Inch, Tank Width 16-1/2-Inch.
Check Stock

Korky 54BP Toilet Tank Flapper - Easy to Install - Made in USA,Black

  • TOILET TANK FLAPPER QUICKLY FIXES running and leaking toilets and eliminate costly water waste..
  • KORKY INVENTED THE TOILET TANK FLAPPER and is still the preferred brand by plumbers for superior quality and reliability..
  • TOILET FLAPPER VALVE MADE OF FLEXIBLE RUBBER for a tight seal on most flush valves..
  • EASY TO INSTALL, the 54BP toilet parts include: (1) Toilet Tank Flapper and (1) Stainless Steel Chain..
Check Stock

3 Pieces Water Tank Replacement Kit Include Toilet Flush Lever Handle Universal Toilet Handle Replacement Toilet Flapper Replacement for Toilet Tank

  • Package includes: you will receive 1 piece of water tank inlet valve, 1 piece of universal toilet handle replacement, 1 piece of toilet flapper replacement, rich styles can meet your combination needs.
  • Quality materials: toilet handle replacement is made of metal materials, and the surface is chrome-plated, which is not easy to wear.
  • Toilet flapper replacement is made of rubber and stainless steel chain, reliable and odorless.
  • The water inlet valve is made of plastic and is processed by injection molding, which can serve you for a long time.
  • Scientific design: the rod of the toilet handle is iron-plated, and three wire hanging holes are designed.
  • You can adjust it according to the actual size, can easily rotate it to adjust the water volume.
  • Adjustable design: the flexible frame universal flapper adopts adjustable design, which can handle with city water, hard water and well water.
  • It is also resisting chlorine and gems issues, which suits most American standard toilet water tank.
  • Easy to install: this toilet tank lever handle is compatible with most common toilets with a front mount flush lever.
  • The level fits for square mounting holes, flush lever locknut is equipped with a reversed screw thread to prevent loosening over time.
Check Stock

T Valve for Bidet with Shut-off Valve, T Adapter for Toilet 7/8” X 7/8” X 1/2 or 3/8”, Chrome Bidet Attachment for Toilet

  • NO LEAK STRUCTURE- T-Valve adapter is made of high quality solid brass body, Durability and longevity guarantee, also with brass cartridge, pass 50,0000 on-off testing, you could use it for a life time..
  • EASY TO USE- Brass Shut-off T-adapter for bidet with Single lever design, you can control the water ON-OFF and the pressure..
  • 3-WAY TOILET TEE CONNECTOR- The thread size of bidet shut off valve is G1/2 outlet for handheld bidet shower hose or with adapter for 3/8” bidet toilet seat attachment connection, 7/8” outlet for water Tank and 7/8” inlet for supply water flexible line..
  • SAFETY CARE DESIGN- Please shut off water when not used for safety, even though shut off the valve, the water still could fill the toilet tank, it does not influence using the toilet..
  • T ADAPTER USAGE- This T valve just a toilet bidet parts attachment, can’t use on shower tube and bathroom faucet aerator or other connection..
Check Stock

3\ Tank to Bowl Toilet Repair Bolt & Gasket Kit 2 Sets Stainless Steel Hardware Kits Fits Most 3-Inch/3.5-Inch,Flush Valve Opening Toilet Tanks-Red

  • ☛【Materials】: Tank-to-bowl gasket made from long lasting sponge rubber construction..
  • ☛【Premium Quality】The included hardware kits are Stainless Steel to ensure long lasting..
  • ☛【Fits 3" flush valve opening】: The 3 inch Tank to Bowl Gasket and Hardware Kit is universal to fit most 3 inch two-piece toilet tanks.Fits most close-coupled toilets..
  • ☛【Easy to install】: Including totally toilet tank to bowl bolts and 2 size of gaskets(3 inch +3.5 inch) for fit flush valve opening.Use to attach toilet tank to bowl..
  • ☛【Package】:Kit includes 3 tank bolts with washers and nuts and 1 sponge rubber spud gasket.
Check Stock

Toilet Flush Valves 2-Inch Replacement Valve Kit Assembly for One Piece Dual Flush Drain Valve Repair Compatible with TOTO THU338N

  • 1.UNIVERSAL DESIGN: Flush valve repair kit suitable for most 2-Inch one piece with top push buttom toilet..
  • 2.MEASURE TWO SIZE: This item is only applicable to 2.56"-2.95"(65mm-75mm)(about the size of a baseball) Toilet tank hole Diameter,and it cannot be....
  • 3.DUAL FLUSH WATER-SAVING TYPE: Dual flush water-saving type: for all drainage you can adjust water in the water tank.
  • 4.QUICK AND EASY INSTALLATION: Our toilet drain valve is suitable for most one piece toilets.(not including flapper valve) easy to install in 10....
  • 5.TIPS: Please check the size in the second image before buying. Fit For TOTO THU338 flush valve..
Check Stock

Tank to Bowl Gasket Kit includes Toilet Tank Bolts and Rubber Gaskets for Repairing Toilet Tank Leaks and Fits Most 3'/3.5' Toilet Tanks with Open Flush Valves

  • [Tank to Bowl Gasket Kit]This universal toilet tank replacement kit can help you reduce toilet leaks,and as part of regular maintenance to prevent toilet tank leaks..
  • [Easy to install]If the toilet tank is leaking,you can use this toilet tank repair kit to repair the leaking tank.It is easy to operate,soft enough when tightened to hold it well,and can be installed without a plumber..
  • [Product Size]The 3 inch tank to bowl gasket kit is universal to fit most 3 inch two-piece split toilets that require a 3-inch or 3.5-inch drain..
  • [Product Accessories]Toilet Tank Gasket Kit with 3 sets of stainless steel bolts,3 sets of lock nuts,3 sets of flat washers,and 2 pieces of rubber sealing bowl (3"+3.5") for installing flush valve opening..
  • [After Sales Service]Our toilet tank gasket comes with a 1 year warranty.If you are not satisfied with this toilet repair kit,you can contact us within 30 days from the date of purchase and we will refund the purchase price..
Check Stock

Fluidmaster 507AKP7 PerforMAX Universal High Performance 2-Inch Toilet Flush Valve Repair Kit with Gasket and Bolts

  • ENHANCES YOUR TOILET’S POWER: Toilet fill valve with bolts and gasket replaces old or inefficient fill valves to repair a leaking toilet tank and optimize flush performance.
  • UNIVERSAL DESIGN: Fill valve replaces any two-piece toilet flush valve and is ideal for use in 3.5 gallons per flush toilets.
  • CORROSION RESISTANT: The 502 2-inch flapper features corrosion/hard water-resistant materials.
  • EASY INSTALLATION: Easily installs in 10 minutes or less to get your toilet flushing like new again.
Check Stock

Danco HYR271T Hydroright Dual Flush Valve and Lever Handle White

  • WATER-SAVING TOILET FLUSH VALVE: The HydroRight replacement toilet flush valve easily converts most standard toilets into a dual-flush water-saving....
  • REPAIRS COMMON LEAKY TOILET ISSUES: Eliminates the most common problems in toilets that cause leaks as this flush valve replaces a worn-out toilet....
  • LEVER STYLE HANDLE: Includes lever style split handle flush activator that gives you a choice to use the quick-flush setting which uses less water....
  • COMPATIBILITY: Fits 1.6 to 3.5+ GPF (gallons per flush) standard 2-piece toilets with 2 in. flush valve and requires 10-inch minimum clearance from....
  • EASY NO-TOOLS REQUIRED INSTALLATION: Simple Drop-in installation without tools in less than 20 minutes with NO TANK REMOVAL required..
Check Stock

Universal Toilet Tank To Bowl Gaskets with 3 Sets Brass Hardware Kits Fits Most 2-Inch 2.5-Inch flush valve opening 2-Piece Toilet Tanks

  • 1.Tank to Bowl Coupling Kits: Universal Tank-to-Bowl gasket replacements with tank to bowl bolts..
  • 2.Fits 2" flush valve opening: The 2 inch Tank to Bowl Gasket and Hardware Kit is universal to fit most 2 inch two-piece toilet tanks. .
  • 3.Tank To Bowl Bolts: The included hardware kits are brass to ensure long lasting. Special designed extra long nuts are for easy installation..
  • 4.Longest Lasting Materials: Tank-to-bowl gasket made from long lasting sponge rubber construction..
  • 5.Easy to install: Including totally 3 sets toilet tank to bowl bolts and 2 size of gaskets(2 inch +2.5 inch) for fit flush valve opening..
Check Stock

Universal Toilet Tank To Bowl Gaskets with 3 Set Brass Hardware Kits Fits Most 3-Inch 3.5-Inch flush valve opening 2-Piece Toilet Tanks

  • 1.Tank to Bowl Coupling Kits: Universal Tank-to-Bowl gasket replacements with tank to bowl bolts..
  • 2.Fits 3" flush valve opening: The 3 inch Tank to Bowl Gasket and Hardware Kit is universal to fit most 3 inch two-piece toilet tanks. .
  • 3.Tank To Bowl Bolts: The included hardware kits are brass to ensure long lasting. Special designed extra long nuts are for easy installation..
  • 4.Longest Lasting Materials: Tank-to-bowl gasket made from long lasting sponge rubber construction..
  • 5.Easy to install: Including totally 3 sets toilet tank to bowl bolts and 2 size of gaskets(3 inch +3.5 inch) for fit flush valve opening..
Check Stock