Top Toilet Valve Stem Replacement

Toilet Economizer Dragon de Agua | 40% EcoFriendly Water Saver

  • WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS..
  • FLUSH VALVE REPLACeMENT INSTALLATION TIP: Be sure to place the Dual Flush Converter directly in the center of your existing flush valve.
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank.
  • the Dual Flush Converter is a replacement to the existing flapper.
  • slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve.
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
  • the permafit silicone seal is also chlorine and chemical resistant and will not warp.
Check Stock

4 Pack Flush Valve Seal Gasket Replacement Compatible with Mansfield 210 and 211, Toilet Flush Valve Replacement Kit Red RV Toilet Seal Compatible with Mansfield 210 and 211

  • Suitable for: these toilet tank gaskets are suitable for Mansfield models 210 and 211 series.
  • You will get 4 pieces toilet seal replacement in red color.
  • Enough quantity can reduce the number of purchases, protect your home life and meet your demands.
  • Proper Size: toilet flush valve seal measures about 8.1 x 8.5 x 0.16 cm/ 2-1/8 x 3-1/8 x 1/16 inch.
  • Suitable size fits well for most toilet, please check the size before ordering.
  • Quality Material: the toilet valve seals are made of rubber, with nice deformability and corrosion resistance, which can prolong the service life of the product and help your toilet work better.
  • Easy to Install: installation dose not need complicated process, the valve seal repair kit can be installed easily with simple steps, please see the installation tutorial below for details.
  • Solve Your Troubles: the toilet valve seal replacement is to solve the problem of excessive flushing sound and too small flushing volume of your toilet, which has caused trouble to your life.
  • The existence of these toilet seal parts is to solve your troubles and make your home life happy and easy.
Check Stock

HTDAK 12 Inch (About 30cm) Toilet Fill Valve Silent Toilet Repair Water Saving Dual Flush Fittings Silent Split Toilet Valve Top Button Replacement Assembly

  • Toilet flush valve: for split toilets with top button, button hole diameter 3.8cm, drain hole diameter 6cm-7cm, measured tank height: 27cm-34cm, with tank cover height: 32cm-40cm.
  • Toilet filling valve: for toilets with bottom inlet, installation thread G15/16, adjustable range according to different tank heights: 27cm-34cm..
  • The double flush valve of the toilet can adjust the water level up and down to achieve full flush or half flush, and save water by adjusting the flush volume to reduce unnecessary expenses..
  • The toilet replacement valve kit is made of stainless steel, high-density carbon particle rubber, and high-quality silica gel: it has anti-corrosion, wear-resistant, rust-proof, leak-proof and other properties, and is suitable for operation under various water pressures and water quality..
  • The universal toilet replacement valve body is simple in structure, easy to replace, and only takes 10 minutes to install. It is easy to clean and maintain, so that your toilet components can continue to run smoothly..
Check Stock

Fluidmaster 400AH PerforMAX Universal High Performance Toilet Fill Valve, Easy Install & Fluidmaster 242 Toilet Fill Valve Seal Replacement Part, Fits 400A Fill Valve , Black

  • Product 1: ENHANCES YOUR TOILET’S POWER: Toilet fill valve replaces old, inefficient valves and eliminates noise while generating 2X greater refill rates than standard fill valve designs.
  • Product 1: UNIVERSAL DESIGN: Fill valve adjusts easily from 10 – 15 inches and is ideal for use in high efficiency 1.28 to 1.6 gallons per flush toilets.
  • Product 1: ADJUSTABLE ROLLER CLAMP: Water-saving roller clamp lets you regulate the fill level in the bowl to help save water and money.
  • Product 1: EASY INSTALLATION: Easily installs in 10 minutes or less to get your toilet flushing like new again.
  • Product 2: Extend the life of your 400A toilet fill valve..
  • Product 2: A replacement seal for the universal design 400A fill valve..
  • Product 2: Simple and quick DIY replacement..
Check Stock

Korky 87 Fixed Height 2-Inch Flush Valve and Premium Flapper

  • FILL VALVE & FLAPPER: Fixed height 2" valve & flapper kit is designed to fit most 2-piece toilet models. Oversized 11" overflow tube allows for better overflow capacity to prevent flood risk..
  • UNIVERSAL: Fill valve and toilet flapper is compatible with 1.28, 1.6, 3.5 and 5 GPF toilets. Replaces valves by American Standard, TOTO and other brands..
  • WHY KORKY: Our high quality toilet products are universal & specific to both older & modern toilet models. Our repair parts are easy to install & made exclusively from long lasting chlorazone red rubber..
  • REPLACEMENT TOILET PARTS: Try Korky Toilet Repair because we continue to commit to designing toilet repair parts that are unviersal to fit the majority of toilets. Designed & manufactured in Wisconsin..
Check Stock

8 Packs American Flag Valve Stem Cap USA Flag Black Stem Cover Aluminum with Rubber Ring Tire Wheel Rim Dust Cover Fits Cars, Trucks, Bikes, Motorcycles, Bicycles

  • Aluminum valve cap: the American flag tire valve caps are made of quality aluminum, sturdy, wear-resistant, and processed to withstand different circumstances, specifically for outdoor use.
  • Each valve cap contains a rubber O-ring for an air tight seal to prevent dust, dirt and debris from entering.
  • Universal stem cover: rim valve stem covers are universal and will fit securely on most tire or wheel air valve stem.
  • They're applicable for most car, truck, SUV, motorcycle and bicycles.
  • Easy installation: with a simple and smooth hexagonal-shaped design, our valve stem caps are easily tightened by hand, can also be cinched down a little tighter if there's any need.
  • Functions: these stem covers are designed to protect the valve core from corrosion due to direct contact with clay, water and snow.
  • Prevent the flat tire and ensure stable tire pressure, ensuring safe driving.
  • Package include: you will receive 8 pieces of metal valve stem covers totally, which are easy to install and remove, convenient for replacement.
Check Stock

Onwon 12 Pieces Snap-in Rubber Tire Valve Stems TR412 11.5mm 0.453 Inch with High Temperature Brass Valve Cores Tyre Valve Stems for Tubeless Rim Holes on Standard Vehicle Tires

  • [Keep Tires Inflated] - Use the Snap-In Short Black Rubber Valve Stem 12-Pack for Tubeless 0.453” Inch 11.5mm Rim Holes on Standard Vehicle Tires to keep your tires inflated at a steady air pressure level and easily check PSI quickly..
  • [Good Quality Tire Valve Stem] - Ozone tested and leak tested, these tire valve stems are manufactured from EPDM rubber and equipped with high temperature brass valve cores..
  • [Abundant Tyre Valve Stems] - 12 pack black tyre valve stems are enough for your spare or replacement.
  • A good accessories for car owners or professional mechanic..
  • [Rubber Valve Stem with a Cap] - The cap of this rubber valve stem can give your wheel a stylish new look and help in keeping the tyre inflated..
  • [Bolt-in Design] - These rubber tire valve stem with bolt-in design, easy and convenient to install and hold the pressure good.
Check Stock

3 Pieces Water Tank Replacement Kit Include Toilet Flush Lever Handle Universal Toilet Handle Replacement Toilet Flapper Replacement for Toilet Tank

  • Package includes: you will receive 1 piece of water tank inlet valve, 1 piece of universal toilet handle replacement, 1 piece of toilet flapper replacement, rich styles can meet your combination needs.
  • Quality materials: toilet handle replacement is made of metal materials, and the surface is chrome-plated, which is not easy to wear.
  • Toilet flapper replacement is made of rubber and stainless steel chain, reliable and odorless.
  • The water inlet valve is made of plastic and is processed by injection molding, which can serve you for a long time.
  • Scientific design: the rod of the toilet handle is iron-plated, and three wire hanging holes are designed.
  • You can adjust it according to the actual size, can easily rotate it to adjust the water volume.
  • Adjustable design: the flexible frame universal flapper adopts adjustable design, which can handle with city water, hard water and well water.
  • It is also resisting chlorine and gems issues, which suits most American standard toilet water tank.
  • Easy to install: this toilet tank lever handle is compatible with most common toilets with a front mount flush lever.
  • The level fits for square mounting holes, flush lever locknut is equipped with a reversed screw thread to prevent loosening over time.
Check Stock

Korky 528T Replacement TOTO Toilet Fill Valve - Fits G-Max and Power Gravity Toilets -Easy to Install -Made in USA

  • TOTO FILL FALVE: Designed to replace G-Max & Power Gravity Toilets. Designed to fix no/slow refilling, running, & noisy toilets, the fill valve is quieter than other fill valves. Adjustable sizing..
  • EASY TO INSTALL: Simply remove your old fill valve or ballcock, insert your new Korky fill valve, & adjust. The innovative twist-lock adjustment makes installation easy. Adjusts from 7-3/4″ to 13-1/2″..
  • INCLUDES: The universal fill valve set includes fill valve, refill tube, metal refill tube clip, mounting nut, cone washer, coupling nut, tamper proof key and instructions..
  • WHY KORKY: Our high quality toilet products are universal & specific to both older & modern toilet models. Our repair parts are easy to install & made exclusively from long lasting chlorazone red rubber..
  • REPLACEMENT TOILET PARTS: Try Korky Toilet Repair because we continue to commit to designing toilet repair parts that are unviersal to fit the majority of toilets. Designed & manufactured in Wisconsin..
Check Stock

FVRITO 16x6.50-8 16x650-8 16x7.50-8 16x750-8 Inner Tube With Straight Valve Stem Gap for Golf Cart,Tractor,Lawn Mower, Snow throwers,Tillers,Trailers,Wheelbarrows and ATV Pack of 2

  • Inner tubes that fit sizes 16x6.50-8 16x7.50-8 16x650-8 16x750-8 16-6.50-8 16-7.50-8,Fit vehicles with 8” rims that are between 6.5'' to 7.5''.
  • Made with premium-quality, heavy-duty rubber, these inner tubes are highly durable and ideal for home, professional and commercial / industrial use with many lawn and garden applications.
  • Fits 8 inch rim size - great replacement for front or rear lawn mower tires depending on application.
  • TR13 valve stem - straight valve stem. Valve is straight, rubber covered, 1.38'' long with maximum inflation of 60 psi.
  • Package Include:2 X Inner Tube,2 X Red Stem Valve caps,2 X Black Stem Valve caps,1X valve core wrench,5 X brass Valve Stem Cores.
Check Stock

2-Pack of Kohler-Compatible Canister Flush Valve Seal Replacements For Toilets (Equivalent to K-GP1059291)

  • Perfect Replacement for your Kohler K-GP1059291 Canister Flush Valve Seal (red or yellow color). Made from high-quality, durable rubber. Equivalent to part K-GP1059291 / 2475620.
  • Create A Stronger Flush: Toilet gasket seals wear out over time and need to be replaced - replacement creates better flushing pressure and results in a quieter toilet. No one wants a loud or hard to flush toilet!.
  • Works On Kohlers With Flush Valve: Compatible with all Kohler toilets with a canister flush valve. If you have any questions about fit, please ask a question below. Outer diameter of 3 3/8".
  • 3 Minute Install: Installation instructions for proper use below. Installation is simpler than you'd expect, and does not require you to remove the base of the toilet. Pack of 2 for a great value!.
  • Please note: This is an aftermarket replacement product (produced by Impresa) meeting or exceeding the quality of OEM rings (based on in-house testing).
Check Stock

4 Pack 7301111-0070A Flush Valve Seal Kit Replacement by BlueStars - Exact Fit for American Standard & Eljer Toilets - Flush Valve Seal Replacements For Toilets

  • ✅ PACKAGE INCLUDES: 4 x 7301111-0070a flush valve seal kit, sufficient quantity for you to replace the old or damaged one and convenient for you to repair your toilet..
  • ✅ PREMIUM QUALITY RUBBER: Our toilet gaskets are made from high-quality, durable rubber, hold up against chlorine and other chemicals in the water supply. The gasket outer diameter is 4 1/4 inches, O-ring outer diameter is 9/16 inches. Please check the size carefully before purchasing..
  • ✅ PERFECT REPLACEMENT: Perfect replacement for widely used Standard 7301111-0070A Flush Valve Seal Kit / Gasket and O Ring Repair Kit for Champion 4 tank. It is compatible with American Standard Champion 4 and Eljer Titan 4 model toilets. It will only take you a few minutes to complete the installation, and will not require you to remove the base of the toilet..
  • ✅ CREATE A STRONGER FLUSH: Toilet gasket seals wear out over time and need to be replaced. The replacement creates better flushing pressure and results in a quieter toilet. No one wants a loud or hard to flush toilet..
  • ✅ MONEY-BACK GUARANTEE: For any reason, you're not completely satisfied, you can ask for a replacement or full refund, no questions asked. Enjoy risk-free purchases. Order with confidence..
Check Stock