Top Tool Holding Systems

Sturdy aluminum hand tool for two systems

  • Firm Aluminum Hand Tool Black for Two Systems PangBahay.
Check Stock

uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm) 8pcs

  • Overall length: 95mm / 3.74". High-speed steel tool is good for general purpose applications, with combination of hardness and toughness for wear resistance.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
  • Round Shank: Can be used with a wide variety of tool holding systems. Reamers are used for light cut, repair work, removing stock or simply for enlarging holes.
  • Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts.
  • Application: Designed for accurate reaming in most materials, using all types of equipment including screw machines, turret lathes, drill presses and machining centers.
Check Stock

Drill America 3/16' x 6' Cobalt Aircraft Extension Drill Bit, GLBCO Series

  • Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium.
  • 135° split point tip prevents drill from walking.
  • Round shanks allow use with a wide variety of tool holding systems.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • 6" overall length for drilling where extra length for reach is required.
Check Stock

uxcell 3mm Chucking Reamer, Tungsten Carbide Lathe Machine Reamer H7 4 Straight Flutes, 100mm Length Round Shank Milling Cutting Tool, for Stainless Steel Alloy Copper Metal

  • Specifications: Cutting dia.: 3.4mm / 0.13".
  • accuracy: D4. High-speed steel tool with cobalt is good for general purpose applications.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications.
  • Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock.
  • Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Reamer is with high hardness, toughness, wear resistance, long service life.
  • Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers.
Check Stock

Sandvik Coromant CoroCut 2-Edge Carbide Profiling Insert, H13A Grade, Uncoated, 2 Cutting Edges, N123F2-0318-RO, 0.0626\ Corner Radius, F Insert Seat Size (Pack of 10)

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid tool holding systems.
  • Profiling - Coro Cut, Inserts Coro Cut 1-2 and 3 / Coro Cut 1-2, Profiling, Ground Insert.
Check Stock

Drill America #40 x 6' Cobalt Aircraft Extension Drill Bit, GLBCO Series - GLBCOX640

  • Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium.
  • 135° split point tip prevents drill from walking.
  • Round shanks allow use with a wide variety of tool holding systems.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • 6" overall length for drilling where extra length for reach is required.
Check Stock

Precision Twist M40CO Cobalt Steel Short Length Drill Bit, Bronze Oxide Finish, Round Shank, Spiral Flute, 135 Degree Point Angle, 17/64\ (Pack of 12)

  • High-speed steel (HSS) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances.
  • Gold oxide, retains cutting fluid and prevent chip to tool welding.
  • 135-degree split point angle is self-centering, reduces walking, good for hard material and reduces pressure on cutting edges.
  • Short-length, for better rigidity and increased strength.
  • Round shanks, for use on a variety of tool-holding systems.
Check Stock

Drill America - GLBCOX121/4 1/4' x 12' Cobalt Aircraft Extension Drill Bit, GLBCO Series

  • Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium.
  • 135° split point tip prevents drill from walking.
  • Round shanks allow use with a wide variety of tool holding systems.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • 12" overall length for drilling where extra length for reach is required.
Check Stock

Drill America GLBCOX65/32 5/32' x 6' Cobalt Aircraft Extension Drill Bit, GLBCO Series

  • Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium.
  • 135° split point tip prevents drill from walking.
  • Round shanks allow use with a wide variety of tool holding systems.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • 6" overall length for drilling where extra length for reach is required.
Check Stock

Sandvik Coromant CoroCut 2-Edge Carbide Profiling Insert, GC1005 Grade, Multi-Layer Coating, 2 Cutting Edges, N123F2-0318-RO, 0.0626\ Corner Radius, F Insert Seat Size (Pack of 10)

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid tool holding systems.
  • Profiling - Coro Cut, Inserts Coro Cut 1-2 and 3 / Coro Cut 1-2, Profiling, Ground Insert.
Check Stock

Dormer A978 Cobalt Steel Extra Long Length Drill Bit, Parabolic Flute, PFX Style, Uncoated (Bright) Finish, Round Shank, 130 Degree Point Angle, 6.50mm

  • Extra-length drill bits have longer flutes and overall lengths than Jobber drill bits, for deeper holes.
  • 130-degree point angle has good centering capabilities and reduces pressure on cutting edges.
  • High-speed steel (HSS) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances.
  • Bright finish with Smooth-Flow coating reduces coefficient of friction, has efficient chip evacuation and extends tool life.
  • Round shanks, for use on a variety of tool-holding systems.
Check Stock

Dormer A977 Cobalt Steel Extra Long Length Drill Bit, Parabolic Flute, PFX Style, Uncoated (Bright) Finish, Round Shank, 130 Degree Point Angle, 6.50mm

  • Extra-length drill bits have longer flutes and overall lengths than Jobber drill bits, for deeper holes.
  • 130-degree point angle has good centering capabilities and reduces pressure on cutting edges.
  • High-speed steel (HSS) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances.
  • Bright finish with Smooth-Flow coating reduces coefficient of friction, has efficient chip evacuation and extends tool life.
  • Round shanks, for use on a variety of tool-holding systems.
Check Stock