Top Tools cutting Tools

Accusize Industrial Tools 1/4'', 1/2'' and 1-1/4'' 60 Degree Indexable Carbide Countersinks, 0046-0960

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Check Stock

Drill America 2\ NPT High Speed Steel 7 Flute Pipe Tap, T/A Series

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Check Stock

Drill America 5/16 Cobalt Stubby Threaded Shank Drill Bit Overall Length 5/8 TSD Series

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Threaded shank is for use with threaded-spindle tools, often used in aerospace and automotive applications.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Featured with 135 degrees heavy duty split point and surface treated for drilling hard, tough, high tensile strength materials.
Check Stock

FJL FORCE Lathe Tools Set of 4, Mirror Polishing Wood Lathe Tools Latest Version Carbide Lathe Tools, Carbide Turning Tools, with Diamond Round Square Carbide Inserts

  • 【PRODUTCS INCLUDE】 - Carbide lathe tools including:(1)11" handle(2)7.9" wood turning tools including square,round,diamond,rounded(3)easy to replace the cutting head of the T15 wrench,all parts are made of special hard sponge full fit wrapped and placed in a packaging box..
  • 【REFUSE TO LOOSEN】 - Some common wooden handle carbide lathe tools will feel a certain degree of looseness or even fall off at the connection between the handle and the tool bar after 25 to 30 days of use.In contrast,the high-quality aluminum alloy handle,stainless steel handle all-metal material,double insurance carbide turning tools fixing structure can free you from the worry of product sturdiness in full..
  • 【HIGH CUTTING EFFICIENCY】 - The sharp high-density tungsten lathe tools cutting edge allows you to confront the wood as if a hot knife cutting butter as simple and smooth,compared with other typical carbon and high-speed steel material cutting head more durable,if wood turning tools becomes dull,just use the included T15 wrench to change the blade direction,you will have a fresh,clean cutting edge again..
  • 【EASY TO CONTROL】 - Whether it is the frosted aluminum handle of the wood lathe ,or the high- speed steel material of the knife shank,the mirror polished f....
Check Stock

Drill America #44 Solid Carbide Drill Bit, DMOD Series

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Manufactured to National Aerospace standard 907.
Check Stock

Pro Vinyl Wraps Applicator Tool Kit Window Tint Film Car Wrapping Tools Includes Felt Squeegees, Plastic Scraper, Wrap Knife and Blades, Magnetic Holders, Cleaning Cloth, Gloves and Finger Sleeve

  • A must have vinyl wrapping tool kit in the sign making and labeling job, includes tools for vinyl application, corner treatment, film holding magnets, cleaning tools, tint window tool, ppf tools..
  • In sign making technology you need plastic squeegees in different degrees of hardness and angles, this vinyl wrap tool kit will offer you freely choose..
  • With this set of vinyl tools, it is more convenient to handle corners, bumpers and other hard-to-reach places..
  • 2pcs yellow sliding mark scrapers with different angles,can be used to make mark during cutting extra vinyl, also can cut the vinyl film into specific width, Calibration of the board is clear enough to measure while marking..
  • Car Wrap Tools Including several cutting tools, knife and blades, sticker film removal plastic scraper, back-slitter cutting knife..
Check Stock

Drill America - DWT64012 1-1/2\-11-1/2\ NPT High Speed Steel 7 Flute Pipe Tap, DWT Series

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Check Stock

Drill America - T/A57129 1/4\-20 High Speed Steel 2 Flute Spiral Point Tap, T/A Series

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Check Stock

Corona ClassicCUT Forged Bypass Hand Pruner, Red

  • MAXFORGEDTM STEEL: Corona's forging process compacts steel molecules into our strongest, most durable tools that stay sharper longer.
  • DUAL ARC BYPASS BLADE efficiently cuts green or dry branches and stems.
  • HAND-MATCHED HOOK AND BLADE: Slant-ground, narrow-profile hook and blade are matched by hand to ensure precise, close cuts.
  • SELF-CLEANING SAP GROOVE removes debris for smooth, efficient cutting action.
  • RESHARPENABLE BLADE for long-lasting performance and reliability.
  • COMFORTABLE, NON-SLIP GRIP best suited for small- to medium-sized hands.
  • CORONA CARES about creating eco-friendly products by implementing 100% recyclable packaging, planting over 15,000 trees to date, and by providing tools to organizations that help grow food and plant urban trees.
  • LIMITED LIFETIME WARRANTY on our garden tools built to last season after season since the 1920’s.
  • ESSENTIAL GARDENING TOOLS: Corona creates high-quality gardening and yard tools for all your landscaping needs, including garden scissors, pruners, loppers and more.
Check Stock

High Speed Steel Taper Pin Reamers - Individual Sizes 8 (.3971\ Small End, .5050\ Large End) Straight Flute

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Check Stock

Drill America-T/A64003 1/16\ NPT High Speed Steel 4 Flute Pipe Tap (Pack of 1), T/A Series

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Check Stock

Minatee 26 Pieces Diamond Cutting Wheel Set for Rotary Tool Including 20 Pieces 0.87 Inch Diamond Cutting Wheel 4 Pieces Mandrel and 2 Pieces Screwdriver for Wood Metal Rotary Tool

  • ★ SAVE MONEYT AND TIME: The cutting wheels set cuts down on the cost of operating on dremel rotary tool and is ideal for cutting, grooving and trimming wood, plastic, ceramics, metal and DIY production. These cutting wheels are compatible with dremel rotary tools as good as original. We use original dremel rotary tools to test this accessory kit. And the mandrels fit for most power die grinders or rotary tools & air tools..
  • ★ EFFICIENT AND SMOOTH CUTS: These rotary cutting wheels tool are made of high quality steels, diamond particles and fiberglass reinforced for strength and durability. The rotary cutting wheels tool kit includes.
Check Stock