Top Topside Paint 2

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood White Quart

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and....
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
Check Stock

Otherkin Tarot

  • UNIQUE NON-SKID DECK PAINT: Durable, textured, low-glare high-traction surface for secure footing, with a comfortable rubberized texture that's less abrasive than traditional silica additives: One part polyurethane non-skid deck paint creates a durable, high-traction surface for comfortable, secure footing and a finish that's less abrasive than traditional silica additives.
  • LONG-LASTING POLYURETHANE FINISH: Durable coating won't fade or peel.
  • easy to clean - scrubbing won't wear away the finish.
  • affordable way to bring your old boat flooring back to life.
  • NON-SLIP PAINT WITH MANY APPLICATIONS: Boat decks, docks, cabin soles, hatches, stairs, steps, gunwales, swim platforms, concrete, patios, floors, and anywhere else you need sure footing.
  • 1-PART PAINT IS EASY TO APPLY by brush or roller on fiberglass, wood, properly primed aluminum, metals, and previously painted surfaces.
  • add a second coat for greater traction. Coverage: 250-300 sq. ft. per gallon.
  • COMES IN PAINT COLORS TO MATCH TOPSIDES OR EXISTING NON SKID PATTERNS: Sand Beige, Kingston Gray, Light Gray, White (tintable with TotalBoat Wet Edge Topside Paint). Available in Quarts and Gallons.
Check Stock

Balboa 30-200-4665 Topside Kit, Lite Duplex Digital, 54665

  • Lite duplex digital Topside kit with 4 button.
  • This topside panel uses an 8-wire phone-type connector with 7ft cord.
Check Stock

TotalBoat TotalBilge Epoxy Based Bilge Paint for Boat Bilges, Bulkheads, Engine Rooms and Locker Areas (Gray, Gallon)

  • ...both colors offer excellent coverage and hide.
  • EASY TO USE: Apply 1-2 coats by brushing, rolling or spraying on prepared fiberglass, wood and metal.
  • prime prepared metals with TotalBoat TotalProtect.
  • for fiberglass prime with TotalProtect if desired.
  • for wood use TotalBoat Topside Primer if desired.
  • EASY TO KEEP CLEAN: Remove grease, oil, and grime from the high-gloss finish using a cleaner/degreaser. TotalBilge won't lift, crack, peel, or stain.
  • CHOOSE COLOR AND SIZE: Available in White and Gray colors, in Quart and Gallon Sizes. COVERAGE: 250-300 sq ft/gal.
  • THINNING: Brush/Roll Application - TotalBoat Special Brushing Thinner 100.
Check Stock

DURALUX Marine Enamel, Aquamarine, 1 Gallon, Topside Paint for Boats and Other Onshore or Offshore Marine Maintenance Applications, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

  • ENAMEL MARINE PAINT: Get a long-lasting, elegant aquamarine finish on your boat, bridge, or other marine structure with Duralux Marine Enamel..
  • LONG-LASTING FINISH: This marine structure and boat paint stands up to salt water, oil, gasoline, repeated washings and the discoloration effects of harbor gasses for a long-lasting finish..
  • FOR A VARIETY OF MARINE APPLICATIONS: This single-component topside enamel adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures..
  • EASY TO USE: Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Packaged in a 1-gallon container..
  • FOR ON-SHORE AND OFF-SHORE APPLICATIONS, Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors.
Check Stock

Rust-Oleum 206999 Marine Topside Paint, White, 1-Quart - 4 Pack

  • UNIQUE NON-SKID DECK PAINT: Durable, textured, low-glare high-traction surface for secure footing, with a comfortable rubberized texture that's less abrasive than traditional silica additives: One part polyurethane non-skid deck paint creates a durable, high-traction surface for comfortable, secure footing and a finish that's less abrasive than traditional silica additives.
  • LONG-LASTING POLYURETHANE FINISH: Durable coating won't fade or peel.
  • easy to clean - scrubbing won't wear away the finish.
  • affordable way to bring your old boat flooring back to life.
  • NON-SLIP PAINT WITH MANY APPLICATIONS: Boat decks, docks, cabin soles, hatches, stairs, steps, gunwales, swim platforms, concrete, patios, floors, and anywhere else you need sure footing.
  • 1-PART PAINT IS EASY TO APPLY by brush or roller on fiberglass, wood, properly primed aluminum, metals, and previously painted surfaces.
  • add a second coat for greater traction. Coverage: 250-300 sq. ft. per gallon.
  • COMES IN PAINT COLORS TO MATCH TOPSIDES OR EXISTING NON SKID PATTERNS: Sand Beige, Kingston Gray, Light Gray, White (tintable with TotalBoat Wet Edge Topside Paint). Available in Quarts and Gallons.
Check Stock

DURALUX Marine Enamel, Haze Gray, 1 Gallon, Topside Paint for Boats and Other Onshore or Offshore Marine Maintenance Applications, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

  • ENAMEL MARINE PAINT: Get a long-lasting, elegant haze gray finish on your boat, bridge, or other marine structure with Duralux Marine Enamel..
  • LONG-LASTING FINISH: This marine structure and boat paint stands up to salt water, oil, gasoline, repeated washings and the discoloration effects of harbor gasses for a long-lasting finish..
  • FOR A VARIETY OF MARINE APPLICATIONS: This single-component topside enamel adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures..
  • EASY TO USE: Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Packaged in a 1-gallon container..
  • FOR ON-SHORE AND OFF-SHORE APPLICATIONS, Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors.
Check Stock

DURALUX Marine Enamel, Cruiser Blue, 1 Quart, Topside Paint for Boats and Other Onshore or Offshore Marine Maintenance Applications, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

  • ENAMEL MARINE PAINT: Get a long-lasting, elegant cruiser blue finish on your boat, bridge, or other marine structure with Duralux Marine Enamel..
  • LONG-LASTING FINISH: This marine structure and boat paint stands up to salt water, oil, gasoline, repeated washings and the discoloration effects of harbor gasses for a long-lasting finish..
  • FOR A VARIETY OF MARINE APPLICATIONS: This single-component topside enamel adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures..
  • EASY TO USE: Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Packaged in a 1-quart container..
  • FOR ON-SHORE AND OFF-SHORE APPLICATIONS, Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors.
Check Stock

DURALUX Marine Enamel, International Orange, 1 Gallon, Topside Paint for Boats and Other Onshore or Offshore Marine Maintenance Applications, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

  • ENAMEL MARINE PAINT: Get a long-lasting, elegant international orange finish on your boat, bridge, or other marine structure with Duralux Marine Enamel..
  • LONG-LASTING FINISH: This marine structure and boat paint stands up to salt water, oil, gasoline, repeated washings and the discoloration effects of harbor gasses for a long-lasting finish..
  • FOR A VARIETY OF MARINE APPLICATIONS: This single-component topside enamel adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures..
  • EASY TO USE: Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Packaged in a 1-gallon container..
  • FOR ON-SHORE AND OFF-SHORE APPLICATIONS, Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors.
Check Stock

TotalBoat TotalBilge Epoxy Based Bilge Paint for Boat Bilges, Bulkheads, Engine Rooms and Locker Areas, White, 1 Quart (Pack of 1)

  • ...both colors offer excellent coverage and hide.
  • EASY TO USE: Apply 1-2 coats by brushing, rolling or spraying on prepared fiberglass, wood and metal.
  • prime prepared metals with TotalBoat TotalProtect.
  • for fiberglass prime with TotalProtect if desired.
  • for wood use TotalBoat Topside Primer if desired.
  • EASY TO KEEP CLEAN: Remove grease, oil, and grime from the high-gloss finish using a cleaner/degreaser. TotalBilge won't lift, crack, peel, or stain.
  • CHOOSE COLOR AND SIZE: Available in White and Gray colors, in Quart and Gallon Sizes. COVERAGE: 250-300 sq ft/gal.
  • THINNING: Brush/Roll Application - TotalBoat Special Brushing Thinner 100.
Check Stock

3M Perfect-It Boat Wax (36113) – For Boats and RVs – 1 Quart

  • USE WHAT THE PROS USE – Premium boat wax is safe for all gelcoats, paint, fiberglass and metal for a glistening shine anywhere on your boat or RV.
  • WORLD-CLASS WAX – Contains carnauba, a Brazilian wax known worldwide for its deep shine and high gloss.
  • EXTREMELY DURABLE – Forms a hard shell that protects against weather, water and oxidation.
  • EASY TO USE – Applies by hand right from the bottle, great for topside paint and hardware.
  • PART OF A FAMILY OF BOAT CARE PRODUCTS – Choose Perfect-It Boat Wax after using 3M Perfect-It gelcoat finishing compounds and polishes.
Check Stock

TotalBoat TotalTread Non-Skid Deck Paint, Marine-Grade Anti-Slip Traction Coating for Boats, Wood, Fiberglass, Aluminum, and Metals (Beige, Quart)

  • NON-SKID DECK PAINT: Durable, textured, low-glare high-traction surface for secure footing, with a comfortable rubberized texture that's less abrasive than traditional silica additives.
  • LONG-LASTING POLYURETHANE FINISH: Durable coating won't fade or peel.
  • easy to clean - scrubbing won't wear away the finish.
  • affordable way to bring your old boat flooring back to life.
  • NON-SLIP PAINT WITH MANY APPLICATIONS: Boat decks, docks, cabin soles, hatches, stairs, steps, gunwales, swim platforms, concrete, patios, floors, and anywhere else you need sure footing.
  • 1-PART PAINT IS EASY TO APPLY by brush or roller on fiberglass, wood, properly primed aluminum, metals, and previously painted surfaces.
  • add a second coat for greater traction. Coverage: 250-300 sq. ft. per gallon.
  • COMES IN PAINT COLORS TO MATCH TOPSIDES OR EXISTING NON SKID PATTERNS: Sand Beige, Kingston Gray, Light Gray, White (tintable with TotalBoat Wet Edge Topside Paint). Available in Quarts and Gallons.
Check Stock