Top Torque Converter Clutch

30 Series 6.5 HP Go Kart Torque Converter Driver Clutch Mini Bike Clutch Driver Pulley Replaces Comet Manco 212CC 3/4' Bore Max Torque

  • The go kart clutch 30 Series Torque Converter Driver Clutch, 3/4″ Bore, with 3/16″ key Replaces Comet Trailmaster #9.500.001 Manco #5957 American Sportworks # 14716 Comet # 203814 Comet # 219552 Murray # 680167 Murray # 1201404 Yerf-Dog Q43201W Belt Size ( 203589A Metric 699 27 23/64″ around outside.) ( 203590A Metric 725 28 21/64″ around outside.) ( 203591A Metric 743 29 9/32″ around out side.).
  • 30 Series Go Kart Mini Bike Torque Converter Driver Clutch 3/4″ Bore,For Go Kart, Mini Bike,Lawnmower,small tractors,Fun Kart,Golf Karts,mini choppers,ATV,motorcycles,and waterski winches etc..
  • This is a brand new aftermarket asymmetrical 30 series complete driver clutch with 3/4” ID hole.3/4″ shaft bore with 3/16” key way. Works With 3HP -7HP Engines ,Fit all engines with 3/4″ shaft.
  • Replacement 30-75 Driver Pulleys will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end, and higher speeds in top end..
  • 100% high quality material. Centrifugal Clutch is made of high quality iron material, which is lightweight, portable, sturdy, wear-resisting, fast heat dissipation and with maximum torsion. It is the combination of elegance and easy to use, firmly and securely, guar....
Check Stock

Motovecor Go Kart Torque Converter for Predator 212 Clutch Set, Replaces Comet TAV2 3/4 Inch 30-75, Manco, 10t 40 or 41 Chain, 3/4' 218353A, (0.75' 10T 40/41)-Upgrade

  • Driver clutch bore: 3/4"(19mm),Driven unit: Overall Diameter 6" (5/8" driven pulley) ,Sprocket teeth: 10 teeth #40/41 chain. This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware..
  • Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation 30-75.
  • Unit replaces:Comet 218353A, 219552A, 219456A, 217610A, and 203814A TAV2 30-75.
  • Comet Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end..
  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches.
Check Stock

MOOSUN 30 Series 6.5 HP Go Kart Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC 3/4' Bore 10T #40/41/420 China (Complete 3/4' Torque Converter Set)

  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches, fit all engines with a 3/4 inch straight crankshaft..
  • Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75.
  • Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors..
  • Driver clutch bore: 3/4″(16mm), Driven unit: Overall Diameter 6″ (5/8″ driven pulley) , Belt Top Width: 19mm(3/4″), Sprocket teeth: 10 teeth for #40/41/420 chain.
  • This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware..
Check Stock

40 Series Go Kart Torque Converter Kit for Manco 2432 for Many 8HP-18HP Engines

  • The ROP Shop replacement 40 Series Go Kart Torque Converter Kit for Manco 2432 for Many 8HP-18HP Engines.
  • Specs - 7 1/2" Diameter. 3/4" Bore. 3/16" Key. Engagement Range: 1600- 3300 RPM. Refer to images 2 & 3 for more information.
  • Includes - (1) Backplate, (1) Integrated Jackshaft, (1) 10T Sprocket, (1) 1" Driver Clutch Pulley, (1) 3/4" Driven Clutch Pulley, (1) Drive Belt, (1)....
  • Fits 8HP-18HP Go Kart engines with 1" Straight Crankshaft & 1/4" Keyway, if this converter kit is used on engines larger than 18hp, the belt will burn....
  • For some units, the driven clutch will need flipped around when mounted, please refer to image 7 for reference.
Check Stock

Drive Belt For Coleman Powersports KT196 Go Kart Buggy 4 Wheelers 196cc 6.5HP

  • Our replacement torque converter asymmetric belt for the Coleman KT196 go-kart replaces the belt numbers 203589, 203589A, 203589 A/DF, and 5959 used on Comet style torque converters. Fits many converter 30 series Torq-a-verter drive systems..
  • Used On Most Manco, American Sportworks and Ken-bar Karts with 5Hp-7Hp engines. Also used on the Comet Tav2 bolt on Torque-a-verter kit..
  • Compatible with torque converters with a 6" distance between the driven pulley and the driver clutch. This distance is measured from the center of each pulley. Not compatible with units with a distance of 7" center to center distance. The belt is asymmetric with a 3/4" wide top face, 18 degree angle on one side, 2.5 degree angle on the other side..
Check Stock

Go Kart Cart Torque Converter Kit 40 Series Clutch Pulley Driver Driven 8-18 HP

  • 40 Series Clutch Pulley Driver Driven 8-18 HP.
  • Fits all 8HP - 18HP engines with a 1" straight crankshaft with 1/4" keyway.
  • Includes: Driver Clutch, Driven Clutch, Belt, Jackshaft.
  • Includes: All mounting hardware attached to an easy to mount backing plate.
Check Stock

AlveyTech Torque Converter Asymmetric Belt for The Coleman KT196 Go-Kart

  • 18 degree angle on one side, 2.5 degree angle on the other side..
  • Our replacement torque converter asymmetric belt for the Coleman KT196 go-kart replaces the belt numbers 203589, 203589A, 203589 A/DF, and 5959 used on Comet style torque converters..
  • This go-kart part is compatible with torque converters with a 6" distance between the driven pulley and the driver clutch.
Check Stock

BD Diesel 1064444SM Transmission Kit Complete Trans Incl Auxiliary Filter Kit Incl Complete Torque Converter Enhanced Stall Stage 4 Transmission Kit

  • This noise isolator will elimilate the annoying torque converter cycling in your 1994-2004 Dodge 5.4L Cummins automatic trucks.
  • Function: This Pedal Position Noise Isolator is designed to help remove the annoying and potentially harmful RF interference.
  • Feature: Reduce torque converter clutch cycling.
  • Made of high quality material, durable in use.
  • Tips: Please review all the product information to make sure this is the one you want before placing your order.
Check Stock

AlveyTech 5/8' Shaft Series 30 Torque Converter Driven Clutch for Coleman KT196 & CK196 196cc 6.5 Hp Go-Karts

  • This Comet TAV2 Series 30 style driven or secondary clutch pulley works in conjunction with a 3/4" shaft driver clutch and an asymmetrical drive belt..
  • Our 5/8" shaft Series 30 torque converter driven clutch for the Coleman KT196 and CK196 196cc 6.5 Hp go-kart is a high-quality aftermarket component of the go-kart's drive system..
Check Stock

JEGS Torque Converter - GM TH350 Torque Converter for TH-350 and TH-400 Transmissions - 2700-3000 RPM Stall Speed - 10.75 Inch Flexplate Bolt Pattern - 500 Horsepower Maximum Applications

  • Performance torque converter for street and track use for improved launch and acceleration.
  • Made in the USA using high quality materials and assembly. Economically priced for performance on a budget..
  • 2700-3000 RPM stall speed to match your engine and camshaft needs..
  • Ideal torque converter for small block applications up to 500 horsepower without nitrous or super/turbochargers..
  • GM TH350/TH40030-Spline 10.750 in. Bolt Circle. Stall Speed: 2700-3000 RPM. Please Note: Converter diameter may vary based on core availability. Does not fit transmissions that require lockup or clutch converters. Small (10.75 in. diameter bolt circle) flexplate or dual pattern flexplate required. For big block applications, use JEGS XHD converters..
Check Stock

Sibosen Torque Converter for Predator 212CC, 3/4' Go Kart Comet CVT Clutch 10T 40/41 and 12T 35 Chain Engine Drive Replacement Set of 30 Series

  • ✅Quality Ensurance for More Power: This go-kart torque converter is made of high-quality iron and aluminum material which is lightweighted, sturdy and durable while allows higher speeds out of small engine, and smoother acceleration. This clutch will help you get more power out of your small engine by reducing engine load..
  • ✅Complete Parts for Easy Assembly: This torque converter fits a 3/4" shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Important parts have been assemblied.
  • ✅Universally Fit: This go-cart torque converter kit replaces OEM part numbers: Comet 218353A, 219552A, 219456A, 217610A, 203814A, TAV2 30-75, Yelf Dog Drive Unit Q43201W.
  • ✅Package Includes: 1 x 3/4" Driver Pulley.
  • 1 x 10 Tooth Sprocket for #40/41/420 Chain.
  • 1 x 12 Tooth Sprocket for #35 Chain(Chain not included).
Check Stock

B1 Rack and Pinion for Coleman KT196 Go-Kart

  • Recommended engine: within 8.0 HP 212CC engines, 3/4"shaft with flat key.
  • Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation.
  • 12T sprocket for #35 chain and 10T sprocket for 41/40 chain drive clutch bore 3/4"(19mm).
  • Unit replaces:Comet 218353A, 219552A, 219456A, 217610A, and 203814A TAV2 30-75.
  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches.
Check Stock