Top Torque Measurement Couplings

uxcell Shaft Coupling 14mm to 14mm Bore L35xD30 Flexible Coupler Joint for Servo Stepped Motor

  • General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
  • It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
  • Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
  • Shaft Usage: 14mm to 14mm/0.55 inch to 0.55 inchTotal Size: 35 x 30mm / 1.38 inch x 1.18 inch (L*D).
  • Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..
Check Stock

uxcell 6mm to 12mm Bore L31xD25 Flexible Coupling Jaw Coupler Shaft Joint for Servo Motor

  • General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
  • It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
  • Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
  • Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..
Check Stock

uxcell Shaft Coupling 12.7mm to 12.7mm Bore L35xD30 Flexible Coupler Joint for Servo Stepped Motor

  • General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
  • It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
  • Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
  • Shaft Usage: 12.7mm to 12.7mm/0.5 inch to 0.5 inchTotal Size: 35 x 30mm / 1.38 inch x 1.18 inch (L*D).
  • Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..
Check Stock

Aopin Rigid Flange Coupling 5mm Inner Flange Coupler Shaft for 3D Printer, Length 15mm / 0.59\ Motor Coupler Connector, Great Apply for Model Shaft, CNC, Motor Guide, DIY Encoder 4 Pcs

  • 【Rigid Flange Coupling Size】: Inner Diameter: 5mm/0.20 inch, Outer Diameter:15mm/0.59 inch, Total Height: 15mm/0.59 inch, Flange Diameter: 28mm/1.10 inch, Base Height: 3mm/0.12 inche, 2 x M4 Fastening Screws..
  • 【Wide Range of Use】: Rigid Flange Coupler Are Used In Servo Motor Systems, 3D Printer, Cnc Machine, Diy Encoderspindle Transmissions, Stepping Motors, Lifting Platforms, Machine Tool Transmissions, Stepping Motors, Encoders, Screw Drives, Machine Platforms Or Gearboxes, Etc. The Purpose Is To Firmly Connect The Driving Shaft And The Driven Shaft To Rotate Together And Transmit Motion And Torque. Great Suitable For Short Support Shaft, Bushing Model, Miniature Shaft, Model Airplane/ Boat / Car..
  • 【Couplings Material】: High-Quality Aluminum Alloy Material, The Surface Is Treated By Anodizing, With Superior Corrosion Resistance. Color: Red, Suitable For Working In High Temperature (-80℃ / +300℃) And Harsh Environments, Even If There Is Vibration And Shock , It Is Still Safe To Move..
  • 【Features】: High Transmission Efficiency. When The Rated Torque Is Exceeded, The Coupling Can Protect The Safety Of The Linkage..
  • 【Package】: 4 Pcs Rigid Flange Couplings. Aopin Recommends Using M2 Hex Wrench!.
Check Stock

TAGVIT 1/2 Inch Drive Digital Torque Wrench, 7.38-147.5 ft-lbs./10-200Nm Angle Digital Torque Wrench, Electronic Torque Wrench with Buzzer and LED Flash Notification, ±2% Accuracy

  • Four Torque Measurement Units: This digital torque wrench can measure from 7.38-147.5 ft-lbs./10-200Nm, with easy to read LED display, available in Nm, Ft-lb, In.lb, Kgf.cm four measurement value switching, can adapt to the application of different torque unit measurement. The angle digital torque wrench has an accuracy of ±2% clockwise and ±3% counterclockwise. Comes with a calibration certificate and conforms to ISO 6789 and ASME B107.14M standards..
  • Buzzer & LED Indicator: When the set torque is reached, the 1/2 inch torque wrench will emit a flashing light, and the buzzer will sound to remind you to stop applying force to avoid damage caused by excessive torque. The angle torque wrench provides 10 preset values, which can save the commonly used torque values and angle values, and can set the upper and lower limits of the torque value and angle value alarm, which is convenient and fast for daily use..
  • Four Measurement Modes: The 1/2 inch drive digital torque wrench has TRACK real-time mode and PEAK mode, torque mode (A1) and angle mode (A2). By quickly switching the four modes of A1&TRACK, A1&PEAK, A2&TRACK, and A2&PEAK, it can meet your dif....
Check Stock

uxcell 5mm to 6.35mm Bore L31xD25 Flexible Coupling Jaw Coupler Shaft Joint for Servo Motor

  • General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
  • It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
  • Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
  • Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..
Check Stock

TAGVIT Digital Torque Wrench (12.54-250.8 ft-lbs./17-340Nm), 1/2 Inch Drive Electronic Torque Wrench with Angle, ±2% CW Torque Accuracy with Buzzer and LED Flash Notification for Bike Motorcycle Car

  • Four Torque Measurement Units: This digital torque wrench can measure from 12.54-250.8 ft-lbs./17-340Nm, with easy to read LED display, available in Nm, Ft-lb, In.lb, Kgf.cm four measurement value switching, can adapt to the application of different torque unit measurement. The angle digital torque wrench has an accuracy of ±2% clockwise and ±3% counterclockwise. Comes with a calibration certificate and conforms to ISO 6789 and ASME B107.14M standards..
  • Buzzer & LED Indicator: When the set torque is reached, the 1/2 inch torque wrench will emit a flashing light, and the buzzer will sound to remind you to stop applying force to avoid damage caused by excessive torque. The angle torque wrench provides 10 preset values, which can save the commonly used torque values and angle values, and can set the upper and lower limits of the torque value and angle value alarm, which is convenient and fast for daily use..
  • Four Measurement Modes: The 1/2 inch drive digital torque wrench has TRACK real-time mode and PEAK mode, torque mode (A1) and angle mode (A2). By quickly switching the four modes of A1&TRACK, A1&PEAK, A2&TRACK, and A2&PEAK, it can meet your different needs and usage habits..
  • Two Way Use: By adjusting the direction button on the head of the electronic....
Check Stock

uxcell 2pcs Shaft Coupling 6.35mm to 6.35mm Bore L25xD20 Flexible Coupler Joint for Servo Stepped Motor

  • General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
  • It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
  • Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
  • Shaft Usage: 6.35mm to 6.35mm/0.25 inch to 0.25 inchTotal Size: 25 x 20mm / 0.98 inch x 0.79 inch (L*D).
  • Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..
Check Stock

8 Pack 7mm Flexible Coupling Connector for Any Motors with Shaft Diameter of 0.275in/7mm - Car Wheels Tires Shaft

  • 【SIZE】--L25mm x D20mm/0.98inch x 0.79inch( L*D).
  • Diameter: 5mm to 8mm / 0.19inch to 0.31inch.Set screwsThread Size: M3.
  • 【MATERIAL】--The product is made of high-quality aluminum alloy with high hardness and blue polyurethane to make the overall effect more textured. Type: Plum shaped..
  • 【SPECIAL DESIGN】--Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, Wear resistant ,high hardness and excellent response..
  • 【QUALITY】--Super torque can absorb vibration, appropriate a large torque transmission.It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
  • 【APPLICATION】--The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty..
Check Stock

1 Piece Clamp 1/2\ x 5/8\ Bore Dia. Steel Rigid Shaft Coupling

  • Item - Rigid Shaft Couplings: Rigid Shaft Coupling, Clearance Dia. (In.): 1-9/16, Max. Torque (In.-Lbs.): 710.
Check Stock

Ruland OD21/33-AT Oldham Coupling Disk, Black Acetal, Bore, 1-5/16\ or 33.3mm OD

  • Ruland oldham couplings have a zero-backlash balanced design for reduced vibration at speeds up to 4,500 RPM. They can accommodate high amounts of parallel misalignment (up to 10% of the hub OD)..
  • Acts as a mechanical fuse stopping power transmission during a torque overload. User can combine clamp or set screw hub with inch, metric, keyed, or keyless bore for a high level of customization..
  • Made from acetal for higher torque and torsional stiffness capabilities than nylon..
  • Proprietary hub machining process for smooth interaction between the hub and disk allowing for significantly longer life..
  • Ruland oldham coupling disks are RoHS3 and REACH compliant.
Check Stock

Genius Tools 1\ Dr. Torque Wrench, 100~700 ft.lb. - 880700F

  • additional details: Replaces flexible element used in 4/5H70P/TL70P double flex couplings. Nexen offers a rebuilding service for most products.
  • contact Motion Industries for more details..
  • for use with series: TL70 Series Torque Limiters, 4HP70 Series Clutches, 5HP70 Series Clutches.
Check Stock