Top Torque Wrench For Scope Mounting

NightForce Standard Duty 1-Piece Picatinny-Style 1913 Mil-Std 20 MOA Black Matte Aluminum Mounting Scope Base Compatible with Remington 700 Short Action

  • STANDARD DUTY BASE - Nightforce Standard Duty bases are a quality, affordable solution for ensuring that your scope is firmly mounted to your gun.
  • ALUMINUM HARD ANODIZED MOUNT - These aluminum bases are machined to Mil. Std. 1913 rail specifications and hard anodized for durability and scratch resistance.
  • PICATINNY-STYLE BASE - Picatinny has a slightly wider, and slightly deeper slot.
  • the picatinny rail also has a standardized spacing of the slots, and the slots typically extend down the length of the rail.
  • 1- PIECE CONSTRUCTION - Milled from a single piece of lightweight aluminum.
  • available with zero elevation or 20-MOA for long-range shooting.
  • MAINTAINING - Clean all mating surfaces thoroughly before mounting.
  • use a torque wrench and do not exceed recommended torque values for base screws: 25 in-lb.
Check Stock

Wheeler Scope Mounting Kit Combo, 1-Inch/30mm - 545454 Engineering Professional Reticle Leveling System

  • INCLUDES: Torque Screwdriver Wrench, 10 screwdriver bits, Wheeler Level-Level-Level, 1" scope ring lapping bar, 30mm scope ring lapping bar, 1" scope ring alignment bars, 30mm scope ring alignment bars, lapping bar handle, lapping compound, thread lock.
  • VERSATILE: Provides virtually everything needed to properly mount any 1-inch or 30mm scope.
  • RELIABLE: Alignment and lapping of rings ensure maximum surface area contact between scope tube and rings.
  • ACCURACY: Reticle leveling is key for scope accuracy, the Level-Level-Level & the Professional Reticle Leveling System provide this, with an integrated bubble level for precise measurement & Reference Level with a magnetic bottom for added stability.
  • EASE OF USE: Securing fasteners properly is critical to accuracy, the Wheeler F.A.T. Wrench makes it easy.
Check Stock

NightForce Scope Mounting Tool Kit with 2-10 in lb Driver Handle and 25 68 and 100 in lb Torque Tools

  • SCOPE MOUNTING TOOL KIT - This kit includes all the torque tools and bits needed to mount your Nightforce scope and rings, maintain your scope, and....
  • TORQUE DRIVER - The 2-10 in lb torque driver is specifically included to maintain the Nightforce ZeroStop, ZeroSet, and ZeroHold mechanisms and the....
  • TORQUE TOOLS - The 25, 68, and 100 in lb torque attachments allow secure attachment and return to zero for Nightforce rings.
  • ZIPPERED CASE - These precision high-quality tools set comes in a zippered storage case that fits nicely inside a range bag.
  • SCOPE WILL STAY IN PLACE - Having the correct torque values ensures your scope will stay in place during use, and prevents over-tightening which can....
Check Stock

1/2' Torsional Torque with 3 Free Socket Lug Wrenches, Automotive Tire Wheel Tools Multiplier Wrench Lug Nut Remover Type Car Tire Disassembly Labor-Saving Torque 3200N.M Suitable for most vehicles

  • Easy, professional ---Professional Labor Saving Wrench is a newly designed for car wheel wrench for easy loosen truck tires lug nut or car tires by using less labor to reach a sufficient output torque without impact or Compressor needed..
  • Effortless,durable--Constructed of High Complexing Steel, these torque multipliers are designed for maximum strength and longevity.With a 1:16 gear ratio bringing 800 NM, this lug nut wrench produces powerful output torque, which helps easily loosen and remove large rusty nus or bolts to save both time and labor..
  • 3 Free Socket and Portable Storage Case---Torque wrench multiplier set includes 3 sockets: 17mm, 19mm, 21mm. Heavy-duty plastic blow-molded carrying case provides easy transportation, safe storage, and quick organization..
  • Safety output range---The maximum safety output torque ≥ 3200N.M. Torque Output: 800 Nm, Trans-Speed Ratio: 1:16 1/2", Square Drive 3 sockets in each set: 17mm, 19mm, 21mm.Heavy-duty blow-molded plastic carrying case for quick transportation, simple storage, and organization..
  • Scope of application--- Labor Saving Wrench can be used to disassemble various kinds of tires the easy way. Suitable for most vehicles, such as cars, trucks, buses, RVs, semi-trucks and other heavy duty vehicles etc.....
Check Stock

Wheeler Scope Mounting Combo Kit with FAT Wrench, Alignment and Lapping Bars, and Storage Case for 1 Inch and 30mm Rings

  • INCLUDES: Torque Screwdriver Wrench, 10 screwdriver bits, Wheeler Level-Level-Level, 1" & 30mm scope ring lapping bars, 1" & 30mm scope ring alignment bars, lapping bar handle, lapping compound, thread lock, and Wheeler PRLS Reticle Leveling System.
  • VERSATILE: Provides virtually everything needed to properly mount any 1-inch or 30mm scope, adjustable barrel clamp level fits around even the largest diameter barrels, including shotguns.
  • RELIABLE: Alignment and lapping of rings ensure maximum surface area contact between scope tube and rings, the barrel clamp level features non-marring pads to ensure no damage is done at the contact points.
  • ACCURACY: Reticle leveling is a key component for the accuracy of a scope set up- the Level-Level-Level helps you to do so properly.
  • EASE OF USE: Securing fasteners properly is critical to accuracy, the Wheeler F.A.T. Wrench makes it easy.
Check Stock

Nightforce Optics X-Treme Duty for Remington 700 Short Action 20 MOA Picatinny-Style Matte Black Steel Scope Base 1-Piece A115

  • RELIABLE CONSTRUCTION - The scope bases match the receiver contour, ensuring straight and true alignment.
  • scallops on the side will not interfere with....
  • HIGH-QUALITY BASE - Bases are constructed from heat-treated, high-strength steel and CNC machined from a single steel billet to closely match the....
  • BEST USES - These Nightforce steel bases are best used when installed on a 20 MOA.
  • 20 MOA is generally used for shooting 500 – 1000 + yards....
  • COMPATIBLE WITH - Nightforce X-Treme Duty bases are designed to fit short action Remington 700 guns.
  • 2-piece and 1-piece configurations are available....
  • NOTE - Clean all mating surfaces thoroughly before mounting.
  • use a torque wrench and do not exceed recommended torque values (Base Screws: 25 in-lb).
Check Stock

Monstrum Pro Series 7075 Aluminum Scope Rings | 30 mm | Medium Profile

  • Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum - providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
  • Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
  • Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
  • Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
  • All Monstrum products are now protected by Monstrum’s lifetime guarantee.
Check Stock

Monstrum Pro Series 7075 Aluminum Scope Rings | 1 inch | Medium Profile

  • Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum – providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
  • Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
  • Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
  • Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
  • All Monstrum products are now protected by Monstrum’s lifetime guarantee.
Check Stock

Wheeler 1" Scope Mounting Kit with Manual F.A.T. Wrench, Level Level Level, Alignment Bars, Storage Case for Scope Mounting

  • INCLUDES: F.A.T. Wrench, 10 bits, 1/2" socket, Level-Level-Level-, Flex Driver, Lapping Bar and handle, Alignment Bars, Lapping Compound, Thread Locker, carrying case and online instructional video.
  • FUNCTION: Made to properly align, attach and level your scope.
  • EASE OF USE: Alignment and lapping bars make ring alignment simple.
  • CONVENIENT: F.A.T Wrench ensures exact torque specs on your scope.
  • ACCURACY: Level-Level-Level provides precise linear leveling.
Check Stock

NEIKO 10573B 1/4” Torque Screwdriver Set, 20 Hex Bits, 10 to 50 In-Lbs, Long Shank Screwdriver Torque Wrench, Adjustable Inch-Pound Torque Screwdriver for HVAC and Gunsmiths (Pack of 25)

  • GUNSMITHING TORQUE WRENCH: This long shank torque screwdriver has a meter window that displays a 10-50 inch-pound range that is adjustable in 5 in-lb increments to ensure tightening to a specified torque as seen in firearm accurizing..
  • INCH POUNDS CLICKER: The torque driver clicking warning feature allows this small torque wrench to torque to a set level, which avoids damage to threaded fasteners. Accurate torque settings of +/- 6 percent to all types of screws and fasteners..
  • EASY TORQUE ADJUSTMENTS: The 'Pull-Turn-Lock' handle is designed to ensure easy adjustment setting and automatic tension locking on this torque screwdriver. Electrician work and instrument assembly are key applications..
  • 1/4” HEX: The quarter inch drive head is compatible with any 1/4-inch socket, which allows uses such as electronic repair, firearm accurizing, scope rings, bases, optic mountings and many more applications..
  • COMPLETE SCREWDRIVER SET: Includes heavy duty storage case that doubles as a carrying case and 20 of the most common detachable bits: Phillips (2 x: #0, #1, #2, #3), Slotted (2 x: 4,6mm), Torx (T10,T15,T20,T25,T30,T40) and Hex (3,4,5,6mm)..
Check Stock

UTG M1 Carbine Mount Complete with 1\ Rings , Black

  • Design for All Standard Pi-catinny Rails. 2 Type of Different Heights 1 inch Scope Mount Rings Contain 2 Pack High Profile Rings and 2 Pack Medium Profile Rings. Perfect for All Standard 21mm Rails. Perfect for Mounting Most Scopes Which Are in 1''/ 25.4mm Scope Tube..
  • Four Set Of Two Type 1'' Scope Rings, 2 Pack Medium Profile, 0.5'' Gap from Base of Mount to Bottom of Ring. ( Item height: 1.9''). 2 Pack High Profile, 0.71'' Gap from Base of Mount to Bottom of Ring. ( Item height: 2.0'')..
  • Hollowed-Out Design & Built-In Tape Protection: Design In See-Through Style, Provide Potential Visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty When Clamping Your Scope. Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
  • Premium Aircraft Aluminum, Solid & Durable: Precision Machining of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field..
  • Rail Clamp Screw Design & Easy To Install: With 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1'' Scope Firmly, Just Twist On/Off....
Check Stock

ToopMount 34mm/1.34 inch Scope Adapter Ring Mount with 20mm Picatinny/Weaver Top Rail, Tactical Barrel Clamp Mount, for Scope Flashlight All Standard Weaver/Picatinny 1913 Rails

  • Material: ToopMount 34mm scope adapter ring is made of high-strength aluminum for long-lasting durability..
  • Size: The 34mm Picatinny rail scope adapter ring gives you a 1.77" length of Picatinny rail on top of your scope. 1.18" saddle height, 5-slot provides enough space for mounting of different sized optics..
  • Application: Accepts all standard Weaver / Picatinny 1913 Rails.Ideal for attaching flashlights, optics, etc..
  • Easy to Install: Easy to install with an enclosed Allen wrench. 2 Screws on each side to ensure your scope is not moving..
  • Package: 1x 34mm Picatinny Rail Scope Adapter Ring 1x Allen Wrench..
Check Stock