Top Torsion Shear Bolts

18' Heavy Duty Earth Auger, 2' Round Drive, 4 ft Long, Replaceable Edges

  • 2" round drive w/ two 1/2" shear bolts (bolts not included).
Check Stock

Extra Heavy Duty Garage Door Pulley - 3 INCH 200LB

  • Cable and Pulley Replacement Kit for Torsion Spring Doors up to 12 Feet Tall & Extension Spring Door to 9 Feet Tall..
  • TWO PAIRS OF LONG CABLES, 1/8"x 168 inches 7x19 Strand [7 x 19(7 strands-19 wires per strand)], 3/32" x 156 inches 7x7 Strand, FUSION CUT ENDS.
  • Each pulley is 200 lb. Load rated for doors up to 400 lbs. The 3/32" cables with 7 x 7 strand has a rating of 960 pounds, The 1/8" cables with 7 x 19 strand and rated at 2000 pounds..
  • Design to work on a multitude of doors with torsion springs or extension spring setup..
  • Package included: 2 Heavy Duty Pulleys for front or rear, 2 Clevis Forks, 2 Bolts, 2 Nuts, AND 4 Cables..
Check Stock

SHALL Electric Metal Cutting Shear, 4.0-Amp Corded Sheet Metal Cutter, Variable Speed with 360 Degree Swivel Head, Continuous Cutting, Clean Cut for 14GA Sheet Metal & 16GA Stainless Steel, 2500 SPM

  • Clean cut: Double cut design for creating a 1/4-inch curled metal thin strip during operation by the double-cut blade. Compared with traditional manual metal shears and single cut shears that creating lots of tiny metal chips and wastes, ours 4-amp electric power metal shear delivers fast clean cut without creating extra wastes and air-borne dust, smooth as silk. Besides, ours key advantages are flexibility in cutting curves, efficiency, accuracy, durability and quality finish.
  • 360 degree swivel head: Cutter head can be adjusted to a desired position for delivering comfortable cuts from any angle or direction. Offer convenience for cutting straight lines, large curves, circles and irregular shapes. Loosen the three hex head bolts, firmly grip the cutter head and twist it to the desired position then tighten the three hex bolts.
  • Variable speed operation: Speed (0-2500 SPM) is allowed to vary by users. Press trigger lightly to cut slowly and press trigger heavily to cut quickly. For stop cutting, just release the trigger to turn off the shear. Flexible and easy to control the cutting speed. Variable Speeds for users to cut specific materials in different situations.
  • Cutting capacity: Cutting up to 14 gauge sheet metal and 16 gauge stainless steel. In add....
Check Stock

TORCH 3 Front 2 Rear LIFT Kit with Shock Extenders For 1999-2007 Chevy Silverado GMC Sierra 4X4 4WD 6 LUG

  • FITS: 1999-2007 Chevy Silverado GMC Sierra 1500 4WD 4X4 (Torsion Bar Suspension ONLY).
  • CONTENTS: Front Adjustable Lift Torsion Keys, Shock Extenders, Rear Tapered Lift Blocks, Extended U-Bolts and Hardware.
  • INSTALLATION: Bolt on kit. Comes with step by step instructions for the DIY backyard mechanic..
  • Ships Same/Next Business Day. 2-4 Day Delivery. Lifetime Warranty. Dedicated Customer Service. Call or message us with any questions!.
Check Stock

3/8\-16 Double Expansion Shields - (Pack of 12)

  • 1/4" zinc plated double expansion shield anchors consist of two expansion cones and steel spring bands that wrap the halves together..
  • The band or shield is designed to expand during installation..
  • The anchor sits flush with the base material and is designed to accept a screw or bolt..
  • These anchors are for applications that deal in shear loads or where the bolts are subjected to pressure or vibration..
  • Screws and bolts can be removed or replaced after installation..
Check Stock

TORCH 3 Front 3” Rear LIFT Kit For 1999-2007 Chevy Silverado GMC Sierra 4X4 4WD 6 LUG Shock Extenders GM 1500

  • FITS: 1999-2007 Chevy Silverado GMC Sierra 1500 4WD 4X4 (Torsion Bar Suspension models ONLY will NOT work on 8 lug HD models).
  • CONTENTS: Front Adjustable Lift Torsion Keys, Shock Extenders, Rear Tapered 3" Lift Blocks, Extended U-Bolts and Hardware.
  • INSTALLATION: Bolt on kit. Comes with step by step instructions for the DIY backyard mechanic..
  • Ships Same/Next Business Day. 2-4 Day Delivery. Lifetime Warranty. Dedicated Customer Service. Call or message us with any questions!.
Check Stock

WULF 1-3' Front 2' Rear Leveling Lift Kit with Extended WULF Shocks compatible with 1988-1999 Chevy GMC K2500 K3500 4X4

  • Compatible with 1988-1999 Chevrolet Chevrolet GM GMC K2500 K3500 4X4.
  • FRONT: 1-3" Adjustable Lift Steel Torsion Keys, (2) WULF Stealth Nitro Gas Shock Absorbers, FREE Red Shock Dust Boots Included, Hardware Included.
  • REAR: 2" Lift Ductile Cast Steel Angled Blocks, (4) Zinc Coated U-bolts, (2) WULF Stealth Nitro Gas Shock Absorbers, FREE Red Shock Dust Boots Included, Hardware Included.
  • NOTE: 8LUG models only. 4X4 4WD models only. Shocks ship separately. TORSION BAR SUSPENSION MODELS ONLY Please see the description for full details, or contact us for assistance.
  • Fast Shipping. Manufacturers Lifetime Warranty. Dedicated Customer Service.
Check Stock

Stainless Steel Sign Mounting Hardware Carriage Bolt with Security Nuts Kit 5/16"-18 x 2" for U Channel Post - 48 Pieces

  • Stainless Steel Carriage Bolts & Tamper Proof Break-Away Nuts in a convenient kit designed for mounting signs to U Channel Post.
  • 5/16″-18 x 2″ 304 Stainless Steel Carriage Bolts – 12 pieces.
  • 5/16″-18 304 Stainless Steel Tamper Proof Break Away Shear Nuts – 12 pieces.
  • 5/16″ 304 Stainless Steel Flat Washers – 24 pieces.
  • Driver-less bolts and security nuts to deter vandalism or tampering after installation. Corrosion and rust resistant 304 stainless steel suitable for long lasting applications exposed to the elements..
Check Stock

Supreme Suspensions - Full Lift Kit for 1987-2004 Dodge Dakota 4WD Adjustable 1 to 3 Front Lift Torsion Keys + 2 Rear Lift Blocks + Square Bend U-Bolts + Torsion Bar Unloading Tool

  • COMPATIBLE WITH 1987 - 2004 Dodge Dakota. *Only fits AWD models with 8.25" rear axle..
  • CONTENTS: (2x) High-Strength Steel Front Lift Torsion Keys, (2x) T6 Billet Aluminum Rear Lift Blocks, (4x) Square Bend U-Bolts, (1x) Torsion Bar....
  • TECHNICAL NOTES: Adjustable 1 to 3 inch front and 2 inch rear suspension lift..
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours without the need for special tools. An alignment is recommended after install..
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires..
Check Stock

Toggle Anchor Bolts Hollow Wall Anchors 304 Stainless Steel Scissors Type Heavy Duty X Anchor M8x150mm Pack of 4

  • 1. New utility and original design. Compare with traditional anchor fasteners, this kind toggle bolts who fixed objects hardly to fall off and make sure safer and more fastness..
  • 2. The specialty of the new toggle bolts is the X shape head (or called scissors head ) who can firmly grasp the inner wall. The X shape head expand like a scissors and provide incredible tensile strength and shear force..
  • 3. Easy installation and can be used repeatedly. The new toggle anchor bolts are widely used in indoor and outdoor such as fix bracket, awning, barriers, furniture, equipment etc..
  • 4. Beautiful shape and good material. All components are high quality 304 stainless steel and offers rust protection..
  • 5. Fit for any concrete, walls, bricks and especially for hollow wall, air brick, foam concrete block and so on..
Check Stock

VEVOR Hitch Mounted Ripper, 18' Shank Length Box Scraper Shank, 4 Hole Site Box Blade for Tractor, 2 Locating Pins Ripper Shank, 2 Plough Tips Box Blade Shank Teeth

  • 4 Adjustable Hole Sites: Hole Spacing: 2 in / 5 cm. The hitch-mounted ripper has multiple depth Settings, adjustable for different operating depths, adding two more holes than most similar products. In addition, the box scraper shank is equipped with a shear bolt to protect the hitch and leg..
  • Carbon Steel Material: The box blade for the tractor is made of high carbon steel with high strength and resistance to deformation. The spray paint coating on its surface insulates metal from direct contact with air and effectively prevents rust and corrosion..
  • Complete Accessories: We come with an additional replaceable plow tip and mounting pin. The ripper shank has full accessories: 18" length adjustable shank, two ripper teeth, two mounting hooks, shear bolts..
  • Effortless Installation: In just three steps, the box blade shank teeth can be installed by hand. Firstly, install the shear bolt.
  • Versatile Applications: Ripper shank for box blade is widely used, compatible with most ATV/UTV and 2-inch receivers, and recommended for CAT 0 and CAT 1 tractors..
Check Stock

Supreme Suspensions - Adjustable 1-3 Front + 3 Rear Lift Kit for 2000-2010 Silverado 1500HD 2500HD 3500HD Full Suspension Lift Kit with Front Shock Extenders - Can Cooler Included with Purchase

  • COMPATIBLE WITH 2001 - 2010 Chevrolet Silverado & GMC Sierra 1500HD, 2000 - 2010 Chevrolet Silverado & GMC Sierra 2500HD, 2000 - 2010 Chevrolet....
  • CONTENTS: (2x) Cold-Forged Steel MAX-Torsion Keys, (2x) High-Strength Steel Rear Lift Blocks, (4x) Square Bend 9/16th U-Bolts, (2x) Front Shock Mount....
  • TECHNICAL NOTES: Adjustable 1 to 3 inch front and 3 inch rear suspension lift. *Our re-indexed torsion keys are adjustable anywhere from 1" to 3"..
  • HIGH-QUALITY SUSPENSION LIFT KIT: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.....
  • PREMIUM CAN COOZIE: Included with purchase is one Supreme Suspensions Waterproof Can Cooler designed with 3mm neoprene to keep your beverage perfectly....
Check Stock