Top Tpu Film Extruder

The Right to Bear 3D Printers

  • 【QIDI Third Generation Extruder Assembly】The two newly upgraded extruders of X-PLUSⅡ are dual-gear extruders with more accurate printing, better heat dissipation, and less clogging.The ordinary extruder has already been installed on the printer, and its max printing temperature is 250 ℃. It can work well with PLA, ABS, and TPU. The high-temperature extruder has a 300 ℃ maximum printing temperature, which can print Nylon, PA12-CF, and PC..
  • 【Double Z-axis driver】 Ensures more stable and more precise printing quality when you print large model size. Higher configuration 3D printer.Large print size is 10.6x7.9x7.9 Inch..
  • 【Filament detection function& Resume Printing】X-PLUSⅡis equipped with a filament runout sensor. When printing a large model, there is no need to worry about the filament depletion. It will ring to remind users.If a power outage occurs during the printing process, the printer will automatically save the breakpoint..
  • 【Latest slicer software version 6.5.1】: Redesigned UI interface of QIDI software is smarter and more convenient to operate. It has changed the software's slicing algo....
Check Stock

Official Creality Ender 3 S1 Pro 3D Printer with 300℃ High-Temp Nozzle, Sprite All Metal Direct Drive Extruder, PEI Bed and CR Touch Auto Leveling Print Size 8.6×8.6×10.6in, Upgraded Ender 3 S1

  • ...0℃ High-temp Nozzle: This creality 3d printer comes with upgraded brass nozzle which can stand 300℃ high-temp, allow you to choose more kinds of filament like ABS, PETG, PA, PLA, TPU and Wood. Not only for more possibilities of creation but also gives you a smoother printing..
  • “Sprite” All Metal Direct Drive Extruder: The new upgraded direct extruder comes with the pushing force up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments like TPU..
  • CR-Touch Auto-level Sensor: CRTouch can complete quickly adjust the the nozzle printing height on the hot bed. CR-Touch gets the 16-points auto-leveling program, which can collect more samples than the 9-points of the BLTouch which makes the bed leveling more precise..
  • Higher Printing Precision & Easy to use: Also like Ender 3 S1, Ender3 S1 Pro also has Z-axis dual-screw+Z-axis dual-motor design. This can make Ender 3S1 Pro works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improvingthe printing quality. You can also quickly install the printers with 6 steps..
  • Upgraded in All aspects: New 4.3 inch color touch screen installed and it takes an user frien....
Check Stock

Official Creality Sprite Extruder Pro Upgrade Kit for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 MAX/Ender 3 S1/Ender 3 S1 Pro 3D Printers, Support Printing Flexible Filament, BL Touch/CR Touch

  • Compatible With Creality Ender 3 Series 3D Printer - Creality Sprite extruder pro is compatible with creality Ender 3, creality Ender 3 v2, creality Ender 3 pro, creality Ender 3 s1, creality Ender 3 max, creality ender 3 s1 pro, creality ender 3 s1 plus 3d printer...
  • All Metal Hotend Kit - All-metal Hotend Kit with heating block, titanium throat and cooling block, allows you to print high temperature materials at 300°C. This ender 3 v2 upgrades perfectly combine dual gear extruder and all metal hotend, enables all the Ender-3 series 3D printers a direct extrusion and high temperature printing conditions..
  • Large Torque, Extrusion Force Up to 80N - The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N (depending on filaments). More precise control of feeding withdrawal..
  • Dual Gear Feeding, More Stable Printing -The ender 3 direct drive adapts double-toothed structure which does not damage filaments, allowing more reliable and stable feeding. With adjustable tensioner, allows you to fine-tune the pressure exerted by the drive gears onto the filament to print more exquisite m....
Check Stock

Junco Intelligent Industrial Grade 3D Printer Model X-max,5 Inch Touchscreen,WiFi Precise Printing with ABS,PLA,TPU,Flexible Filament,300x250x300mm

  • Build Volume 11. 8''x9. 8''x11. 8''(300x250x300mm).
  • Filament Types PLA, ABS, TPU, PETG, Nylon, PC, Carbon fibber, etc..
  • Full metal support more stable than plastic support.
  • Aviation aluminium, CNC machining aluminium alloy.
  • Super big desktop 3d printer, for Education Institutions for Hands-on, Project-Based Learning, Designers, Tinkerers, Hobbyists, & Home Users, Advanced....
Check Stock

Creality Sprite Direct Drive Extruder Kit for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 S1/Ender 3 Max/CR-10 Smart Pro 3D Printers

  • Compatible： Creality Sprite direct drive extruder upgrade kit compatible with Ender 3, Ender3v2, Ender 3 pro and Ender 3 Max..
  • Double gear feeding, stable and reliable： The double tooth structure makes the feeding is more reliable and stable. Reduces the chance of clogged nozzles when retracting consumables and failures when loading new consumables. Full metal hot end kit with heating block, titanium throat and cooling block, allowing you to print high temperature materials up to 300°C.
  • Large Torque, Extrusion Force Up to 80N - The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N (depending on filaments). More precise control of feeding withdrawal..
  • Support Printing Flexible and High Temperature Filament ： With direct drive extruder and up to 300°C all metal hotend kit, the Spirit direct drive extruder upgrade kit supports 1.75 MM filaments, including PLA, TPU, PETG, ABS, PA, PC etc..
  • After-sales Service： Life-time professional technical supports, If you encounter unsolvable problems during installation and use, please f....
Check Stock

SainSmart 3mm TPU 3D Printing Filament, 1.0 kg, Red

  • TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible..
  • Compatible with printers on the market that accept 3 mm filament. Including Lutzbot, Ultimaker 3D printers. With bowden extruder needs to print slowly, excellent adhesion on heat bed, not neccessary for extra adhesion like tape..
  • With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament's tendency to not warp..
  • Resist to oil, grease and etc. Duarable performance even in chemical harsh environment..
  • Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more!.
Check Stock

Creality Direct Drive Extruder Kit,New Sprite Extruder Pro Upgrade Kit for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 S1/Ender 3 Max/CR-10 Smart Pro 3D Printers

  • Near-ender extruder, geat at printing TPU, compatible with a wider range of filaments..
  • Better Extrusion: because the motor mounted to print head, it is easier to push filaments through the nozzle, result in better extrusion..
  • Faster Retraction: because the extruder is near to nozzle, it can retract filament quickly..
  • 4 wheels back plate suitable for heavy loading, reduce vibration..
  • Easy to assembly. Suitable for Creality ender 5, ender 5 pro 3d printer..
Check Stock

Official Creality Ender 3 S1 3D Printer with Direct Drive Extruder CR Touch Auto Leveling High Precision Double Z-axis Screw Silent Board Printing Size 8.6X8.6X10.6in, Upgrade Ender 3 V2 for Beginners

  • Dual-Gear Direct Drive Extruder: Compatible with more filaments, Ender 3 S1 3d printer can print PLA, TPU, PETG, ABS.etc. It is more lighter and features less inertia and more precise positioning. Upgraded dual-gear direct extruder features two chrome steel gears that are engaged at a 1:3.5 gear ratio. With a pushing force of up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments such as TPU..
  • CR Touch Auto Bed Leveling: Upgraded CR Touch 16-point automatic bed leveling technology saves you the trouble of manual leveling. Easy to use, the intelligent leveling system can automatically compensate for the printing height of different points of the heatbed..
  • Removable Spring Steel Print Sheet: Different from ender3, ender 3 pro and ender 3 v2, this new-released FDM 3d printer comes with a removable PC spring steel platform. The innovative printing platform is a combination of a PC coating, a spring steel sheet and a magnetic sticker, which sticks to the surface immediately when released. The PC coating brings good adhesion and printed models can easily be removed by bending the ....
Check Stock

SainSmart TPU Filament 1.75mm, 0.25KG (Blue+Red)

  • What you get: SainSmart Flexible TPU Filament 0.25KG × 2: Blue+Red.
  • 0.25 kg (approximately 0.55 lbs) per spool.
  • Recommended extruder temperature: 200 - 220°C.
  • Recommended platform temperature: 40 - 65°C.
  • TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible.
  • Compatible with all FDM printers on the market which accept 1.75 mm filament.
  • Including Prusa i10, Monoprice MakerSelect, SainSmart xCreality, and other RepRap printers.
  • Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more.
Check Stock

SainSmart TPU Filament 1.75mm, 0.25KG (Blue+Red+Green)

  • What you get: SainSmart Flexible TPU Filament 0.25KG × 3: Blue+Red+Green.
  • 0.25 kg (approximately 0.55 lbs) per spool.
  • Recommended extruder temperature: 200 - 220°C.
  • Recommended platform temperature: 40 - 65°C.
  • TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible.
  • Compatible with all FDM printers on the market which accept 1.75 mm filament.
  • Including Prusa i8, Monoprice MakerSelect, SainSmart xCreality, and other RepRap printers.
  • Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more.
Check Stock

SainSmart - 540GID Flexible TPU 3D Printing Filament, Glow in The Dark, Luminous Green, 1.75 mm, 1 kg, Dimensional Accuracy +/- 0.05 mm

  • The most intriguing feature of this TPU is glowing in the dark, it contains phosphorescent materials that glow in the dark after absorbing light energy. Glowing effect is stronger when exposed to UV light..
  • TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible..
  • Compatible with most purse I3 3D printers on the market that accept 1. 75 mm filament. With Bowden extruder needs to print slowly..
  • With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp. Also, no jamming and bubble.
  • Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more!.
Check Stock

SainSmart 87A TPU Filament 1.75mm Flexible TPU 3D Printer Filament 1KG Spool (2.2 lbs), Clear

  • Flexible and Soft: Specially formulated plastic with an increased amount of flexibility, with rigid structure. Recommended for printing objects, which will be impacted more than normal ones. 1.75mm diameter, 87A hardness, 1.12 density(g/cm³)..
  • TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics that prints strong parts that are also flexible..
  • Short Range Feeding Needed: The flexible material needs to short-range feeding, and there is no gap between the wire feed roller and the extruder, otherwise, the flexible material will curl and get stuck between the two, resulting in poor feeding..
  • Premium TPU Filament: TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics that prints strong parts that are also flexible. It has high transparency, high mechanical strength, and good properties..
  • Impact resistance & wide applicability: Great performance in waterproof, cold, and UV resistance, good for industrial production, medical applications, industrial arts, personal DIY, etc..
Check Stock