Top Track Jack 15 Ton

US JACK D-51126 20 Ton Bottle Jack Made In USA

  • OTC's 8-Ton Bottle Jack features a rugged forged cylinder and base to ensure strength and prevent leaks, along with a chromed pump piston and ram for additional rust resistance.
  • In-line design (pump mechanism centered on the cylinder) makes the jack much easier operate and manuever into position with the handle compared to offset designs.
  • Specifications include: 4-15/16 inch long stroke, 7-13/16 inch minimum retracted height, 15-3/4 inch maximum height with screw extension, 3 inch long screw extension.
  • 1-3/8 inch diameter saddle, 3-9/16 inch x 6 inch rectangular base.
  • OTC bottle jacks will provide years of reliable service, but eventally time and use will require new seals so every OTC bottle jack includes a free, life extending, seal kit.
Check Stock

AKRON PRODUCTS C-4 Floor Jack, 1 Pack

  • [Make Structural Repairs]: The BISupply Adjustable Shore Jack Post House Support Jacks 1-Pack transforms 4x4 inch (10.2 cm) square lumber into a temporary support or non-primary support (not intended for permanent installation).
  • [Adjust the Size]: Fits bottom of a 4x4 inch timber post of any height.
  • 4-inch height adjustment thread for shoring tension.
  • 14.5 to 18.5 inch (36.8-47 cm) overall lifting shore height.
  • 3.5x6 inch (8.9x15.2 cm) base plate with (4) 0.6-inch/15mm and (2) 0.3-inch/8mm mounting holes.
  • [Built to Last]: Constructed from coated steel for strength and longevity that resists rust and corrosion.
  • Square tube, round tube, and threaded plate welded to create singular floor joist jack post unit.
  • Load capacity up to 24,700 pounds / 12.4 ton (11,204 kg / 11.2 MT) dependent on 4x4 used.
  • [Stabilize Easily]: Place adjustable shoring jack on end of 4x4 inch wood post, secure post to shore jack, turn the tension handle for 4 inches of height adjustment, and secure 4x4 shore jack base (4x4 lumber required, not included.
  • nails/wood screws recommended, not required or included).
  • [Fit Anywhere]: 11.8x0.4 inch (30x1 cm) horizontal tension handle is removable and slides for use against an obstruction.
  • Base plate includes (4) 0.6-inch/15mm and (2) 0.3-....
Check Stock

K Tool International 50 Ton Blue Air Hydraulic Truck Jack HD KTI63198

  • [50-TON CAPACITY] - K tool International service jack rated to lift up to 50 tons or 100,000 lbs..
  • [LIFTING RANGE] - K Tool 50 ton jack has a lifting range from 11.4" to 21.25". Service Jack provides the opportunity for many automotive/truck needs..
  • [BUILT-IN BY-PASS] - K Tool truck jack includes a built-in by -pass device to protect hydraulic system from over pumping damage..
  • [LONG PUMP HANDLE] - Long pump handle with release knob. Works independently of handle position. Handle locks in both vertically at 45 degree angle and horizontally..
  • [NARROW WIDTH] - Truck jack narrow width allows jack to fit between tandem wheels..
Check Stock

BEETRO 3 Ton Electric Car Jack 12V Scissor Jack Lift with Electric Wrench, Electric Jack for Car Sedan SUV Tire Changing

  • RATED CAPACITY : The maximum load capacity of BEETRO car jack is up to 3 ton(6600 pounds), lifting height is 5.5 -16.54 inches. Two removable raised heads are respectively designed for vehicles of different heights, suitable for most vehicles under 3 ton, Sedan, SUV, MPV etc. NOTES: Never used the jack on sloped ground. Never use it on truck or over 3 ton vehicles. Start car engine before operation,ensure sufficient electricity..
  • TWO WAY POWER SUPPLY : This 12v jack is cigarette lighter or car battery powered, and comes with a 11.5 foot power cable, long enough to go through the 4 tires without changing the power source..
  • EASY TO USE : Electric scissor jack is simple to operate, just press 2 switches to lift or lower your car, get rid of laborious and tedious manual working. It just takes about 2 minutes to lift a car, greatly cut repairing time. Perfect for car's owners change tire in emergency, especially best choice for women..
  • HIGHER SECURITY: This 3 ton scissor jack adapts heavy-duty steel construction which features to strong bearing capacity and distortion resistance. It will automatically stop lifting when it r....
Check Stock

2 Ton Heavy Duty Floor Jack, Lifting Range 5-1/8\ to 13\

  • Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/8 and a maximum height of 13".
  • The 2ton floor jack jack equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.
  • The floor jack has a large saddle surface area for better contact with the load being supported.
  • Heavy duty steel construction provides long term durability，Built-in safety valve provides overload protection.
  • Service jack is built for extra lifting and maneuverability for all load lifting needs. Heavy-duty steel construction provides stability and positioning..
Check Stock

Chamber Wax Pen Red

  • 14000 psi Ram Hydraulic Jack Ensures Successful Pressing at Relatively Low....
  • Leak-Free Removable Hydraulic Bottle Jack for Easy Replacement.
  • Reinforced Jack Handle to Add Strength and Durability.
  • Upgraded Body Frame to Hold Up To 12-Ton Force.
  • Ergonomic Handle Design Allows You to Move the Press Conveniently.
Check Stock

JEGS 80077-1 Replacement Rear Caster For JEGS 3-Ton Aluminum Jack (555-80077)

  • Fits JEGS Professional Low-Profile 3-Ton Aluminum Floor Jack (555-80077).
  • Sold Individually JEGS 80077-1 rear caster is just one of the replacement parts offered for our 555-80077 professional low-profile 3-ton aluminum floor jack. Easily installed, the castor will help keep your jack mobile and safe..
Check Stock

TENFUN Scissor Jack 1.5 Ton(3,307 lbs) Car Jack with The Saving Strength Ratcheting Handle

  • This 2nd generation scissor jack works with a saving strength ratcheting handle to raise and lower, it is different from the old metal rod jacks..
  • Product parameters: A lifting range of 4-1/8" to 15-1/8" with a 1.5 ton (3,307 lb) capacity, it suits for most sedans..
  • Comparing with hydraulic jack, this portable car lift is really handy and it is light enough to leave in your trunk..
  • Car jack kit have passed factory reliability and safety tests, black environmentally friendly electrophoretic paint, not easy to rust..
  • Reminder: When the jack supports the vehicle, it is forbidden to place any part of the body under the vehicle. Be sure to read the precautions before use..
Check Stock

Jack Boss Car Scissor Jack 1.5 Ton 3,300 lbs Capacity Steel Portable Tire Jack with Handle Mounts Durable Leveling Jacks for Car Truck Sedans MPV

  • [Capacity]Scissor lift jack max load 1.5 ton (3,300lb) capacity.Lifting height range from 3.7"to 15.4".Total length:17.7".
  • [Durable Material]Scissor jacks for car adopt welded forged steel construction to ensure durabilty,solid and corrosion-resistant.The design of the....
  • [Wide Use ]1.5 ton scissor jack fit for most family cars of less than 1.5 tons,such as SUV,MPV,travel trailer,station wagon,mini bus,RV.Collapsible....
  • [Wide base Support]The design of the card slot of the supporting head Sticks tightly to the bottom of the car without slipping off.Enough wide base....
  • [Safety and After-sales]Our scissor jacks are professionally tested to fully ensure the safety of each user and can be used at ease.Meets ANSI/ASME....
Check Stock

BIG RED T10152 Torin Steel Scissor Lift Jack Car Kit, 1.5 Ton (3,000 lb) Capacity, Red

  • Collapsible, steel scissor lift jack has a compact design that can be used as a rugged replacement jack or as an extra utility jack that can be stored in the trunk of your car.
  • Features a lifting range of 4-1/8" to 15-1/8" with a 1.5 ton (3,000 lb) capacity.
  • Engineered using a drop forged alloyed steel construction for quality and durability.
  • Equipped with an extra-wide base which adds stability and strength.
  • 1 piece handle delivers on-the-spot quick response and speed.
Check Stock

BIG RED 10 Ton (20,000 lb) Capacity Heavy Duty Steel Jack Stands, 2 Pack, High Profile, T90106

  • Heavy-duty jack stands are used to support your vehicle after lifting with a jack.
  • Constructed of high-grade forged steel with a welded frame design for durability.
  • Handles a wide range of vehicles and equipment, including agricultural and industrial applications.
  • Adjustable height ranges from 28.1" to 46.5" with a 10 ton (20,000 lb) load capacity.
  • Wide foot base measures 15.7" L x 15.7" W, providing added strength and stable support.
  • Features a large saddle surface area for better contact with the load being supported.
  • Includes a limited 1 year manufacturer warranty.
Check Stock

Torin 10 Ton (20,000 lb) Capacity Heavy Duty Steel Jack Stands, High Profile, 2 Pack, T80106 , Black

  • Heavy-duty jack stands are used to support your vehicle after lifting with a jack.
  • Constructed of high-grade forged steel with a welded frame design for durability.
  • Handles a wide range of vehicles and equipment, including agricultural and industrial applications.
  • Adjustable height ranges from 28.1" to 46.5" with a 10 ton (20,000 lb) load capacity.
  • Wide foot base measures 15.7" L x 15.7" W, providing added strength and stable support.
  • Features a large saddle surface area for better contact with the load being supported.
  • Includes a limited 1 year manufacturer warranty.
Check Stock