Top Track Roller Washer

(12) Garage Door 2\ Nylon Roller w Cap 4\ Stem 13 Ball Bearing Heavy Duty Smooth by The ROP Shop

  • The ROP Shop replacement (Pack of 2) 2" Nylon Garage Door Rollers with 4" Stem & 11-Ball 6200ZZ Bearing.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

(2) Garage Door 2\ Nylon Rollers 4\ Stem 11 Ball Bearing Smooth Quiet Heavy Duty by The ROP Shop

  • (Pack of 12) Replacement Garage Door Nylon Roller.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Stem Length: 4" (3.75" from bevel). Stem Diameter: 7/16". Single Load: 75 lbs. Ball Bearings: 13. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Includes - (12) Sealed Nylon Garage Door Rollers.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed precision ball bearing with backside protective dust shield. Plus double plating thickness on stem is designed for max performance and ultra-life weather protection. Garage door roller rated for up to 20,000 cycles on a 12' door.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

(4) Garage Door 2\ NYLON ROLLERS w/ Cap 7\ Stem 13 Ball Bearing Heavy Duty by The ROP Shop

  • (Pack of 10) Replacement Garage Door Nylon Roller.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Stem Length: 4" (3.75" from bevel). Stem Diameter: 7/16". Single Load: 75 lbs. Ball Bearings: 13. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Includes - (10) Sealed Nylon Garage Door Rollers.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed precision ball bearing with backside protective dust shield. Plus double plating thickness on stem is designed for max performance and ultra-life weather protection. Garage door roller rated for up to 20,000 cycles on a 12' door.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

(6) Garage Door 2\ Nylon Rollers w/Cap 7\ Stem 13 Ball Bearing Heavy Duty by The ROP Shop

  • (Pack of 2) Replacement Garage Door Nylon Roller.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Stem Length: 4" (3.75" from bevel). Stem Diameter: 7/16". Single Load: 75 lbs. Ball Bearings: 13. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Includes - (2) Sealed Nylon Garage Door Rollers.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed precision ball bearing with backside protective dust shield. Plus double plating thickness on stem is designed for max performance and ultra-life weather protection. Garage door roller rated for up to 20,000 cycles on a 12' door.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

DIYHD 8FT Sliding Hardware Rolling Library Kit(No Ladder), Black

  • Roller is 10° bent to make it sutable for ladder.
  • Package's including:Roller*2,Stop*2,4ft track*2,Track connector*1,Track&wall connector*6.
Check Stock

DIYHD 20FT Sliding Library Ladder Black Track Kit,Stand Up Tensible Rolling Hardware

  • Hardware only,Ladder sold seperately.Assembly Required..
  • Space Saving.Custom made Tensible rollers are able to stand up the ladder when not in use..
  • BOTTOM rollers are included in the kit.The position and angle to install the bottom roller can be adjusted to your most comfortable and satisfactory. It can even make up for the little shortness of the ladder (just to install the bottom roller lower). You could remove the bottom roller if you think it is dangerous to have rollers on both ends..
  • Full set hardware kit includes:4FT track with 2 welded bracketsX 5.
  • Tensible rollerX 2, Bottom roller X 2, Stopper X 2, End cap X 2,Set screws.
Check Stock

DIYHD 13.2FT Sliding Library Ladder Black Track Kit,Stand Up Tensible Rolling Hardware,Floor Wheel with Brake

  • Hardware only,Ladder sold seperately.Assembly Required..
  • Space Saving.Custom made Tensible rollers are able to stand up the ladder when not in use..
  • BOTTOM rollers are included in the kit.The position and angle to install the bottom roller can be adjusted to your most comfortable and satisfactory. It can even make up for the little shortness of the ladder (just to install the bottom roller lower). You could remove the bottom roller if you think it is dangerous to have rollers on both ends..
  • Full set hardware kit includes:39.37" track with 2 welded bracketsX 4.
  • Tensible rollerX 2, Bottom roller X 2, Stopper X 2, End cap X 2,Set screws.
Check Stock

(RB) Garage Door Roller Wheel/Steel 2\

  • ✅ NOISE REDUCTION - The 6200ZZ 8-ball bearing design greatly reduces friction between roller and shaft when rotating, giving you a quieter experience that you cannot find on old metal rollers..
  • ✅ DURABLE MATERIAL - While the white nylon reduces noise better than plastic and metal, it is duration at the same time. Our rollers can be used for more than 100,000+ cycles under 150 lbs load test..
  • ✅ STANDARD SIZE - As per 6200ZZ standard, our roller follows the standard size. The roller has 4-5/8" (11.75 cm) long shaft, 7/16" (1.11 cm) thick shaft, 1-13/16" (4.6 cm) wheel diameter, 1/2" (1.27 cm) wheel shoulder, and 1/2" (1.27 cm) wheel thickness..
  • ✅ SIMPLE INSTALLATION - You can replace the rollers by slightly bending track at seam to remove and replace old roller with new nylon roller, then moving the door and replace the next roller. You can also replace the rollers by removing screws that attach the brackets to your door, secure the cable before releasing bottom brackets, clamp cable to track, slide out old rollers and slide in new nylon rollers before you screw in brackets again and complete the process..
  • ✅ BONUS WARRENTY SERVICE - If you have any question or issue regarding our product, you can contact us at any time and we will do our best to ....
Check Stock

ZEKOO 12 FT 4 Doors Bypass Barn Door Hardware Four Rollers Style Kit

  • ...bypass, double track can let each barn door silde on each track where you want, they will not have too much overlap between, it can let your openings show maximum display in the same length track, the two barn doors slide independently without affecting each other..
  • 【Why Choice Our Sliding Bypass Hardware】1.Roller Bearing is high purity bearing steel Gcr15, made of reinforced steel and electrophoretic, ring fixed structure and external dust cover, prevent steel ball from leaving the locus and oil leakage, keep roller lifetime lubricated.
  • Passed the test of opening - closing for 160000 times, wear-resisting, ensure the stability of the move and the wheel's fluency. 2.The rail is Pre-drill 16" apart hole on rail to line up standard studs..
  • 【Heavy duty construction ensures safety】Material thickness up to 1/4 inch (6.3cm) Solid carbon steel (High Standard Q235), multiple high temperature fine electrostatic powder spraying process black frosted, corrosion protection, antirust, anti-scratch. 8.8 grade Self-tapping and roller bolt make our hardware kit can hold two 230lbs doors comfortably. Door Stopper have rubber covered, good buffer effect, and educe the noise.The hanger wheel surface is covered with nylon, slide very quietly..
Check Stock

DIYHD 6.6FT Library Hardware Rustic Black Sliding Ladder Track, kit

  • Roller is 10° bent to make it sutable for ladder.
  • Package's including:Roller*2,Stop*2,6.6ft track*1,track&wall connector*5.
Check Stock

Mini Fridge Stand Mobile Base With 4 Locking Refrigerator Wheels And 8 Strong Feet For Washer Dryer Washing Machine Stand Pedestal, Refrigerator Stand, Adjustable Appliance Dolly Square, Moving Roller

  • 【ADJUSTABLE SIZE】This mobile base can be adjusted from 18 inches to 28 inches. Measure your appliance before purchase. There are 8 height adjustable feet with suction cup, they will hold your appliance firmly..
  • 【UNIVERSAL】The moving roller is applied at the bottom of appliances (portable washing machines, washer and dryer, refrigerator or mini fridge). It lifts the appliance up to 5.2" higher from the floor. Less humidity will extend the life cycle of the washing machine and dryer..
  • 【MULTI-USE】The appliance rollers also move furniture or appliance easily like rolling dollies. 4 DOUBLE swivel casters come with lock. Lock your washer dolly once it is in the right position..
  • 【DURABLE CONSTRUCTION】Our washer stand washing machine pedestal comes with bigger 8" platform. It will hold weight up to 660 lbs. Upgraded version takes 1 minutes to install. All feet and wheels were installed. You just need to install the frame and lock in the right position..
  • 【Noise reduction and Anti-Vibration】This roller base is equipped with black anti-vibration rubber pads, which can reduce slipping movement, stabilize the washer, reduce the noise..
Check Stock

Prime-Line MP7137 Monorail Drawer Track Repair Kit, 22-5/8 in, Steel Track and Guides with Plastic Wheels, (1 set)

  • Used to replace damaged or missing drawer tracks and guides.
  • Universal tri roller system includes 2 rollers, a back plate, center track and roller.
  • Constructed of both galvanized steel and mold injected plastic components.
  • Requires a 1-1/4 in. top or bottom clearance for proper operation.
  • Has a maximum safe load of 20 lbs. for the tri roller system.
Check Stock