Top Track Screw

DCT 5 Star Knobs Kit 1/4in-20 Threaded Knob Bolt with Knob Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

  • TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 1/4-Inch-20 internal thread is required.
  • Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 1/4-inch T-bolts.
  • PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
  • T track knob threading has 1/4-inch (6.4mm) diameter and 20 threads per inch (if you turn a nut 20 revolutions it will move 1 inch).
  • Bolts and washers are 1/4”-20 x 1-1/2-inch.
  • Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 1/4-inch bolt heads.
  • EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
  • Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
  • BUILT TO LAST: T knobs package includ....
Check Stock

Tap Extractor - Steel Broken Head Taps Remover Stripped Screw Tap Extractor Set(10件套)

  • ...cess). Next switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw, and then you can easily remove the screw..
  • MODERN TOOL : Keep this set in your toolbox to get the damaged screw out and your project back on track. Typically called an easy out or “EZ out”, highly suitable for various machinery repair work..
  • QUALITY GUARANTEE - We have carried out strict quality inspection and control on one of our broken screw adapters before they leave the factory, Your damaged screw remover set is backed by our Highest Quality Promise.
Check Stock

50 Watt GU10 Halogen Bulb MR16 GU10 Base 120-Volt Light Bulb Halogen 50W 120V MR16 Flood Light Bulbs,3-Pack

  • 50W /120V/GU10 Twist & Lock Base, Halogen Light Bulbs, 2700K Warm White , Clear Glass..
  • Perfect fit for track lights and spotlights for living room, bathroom, bedrooms and hallways. Suitable for office, dance hall, bar, exhibition, art....
  • Standard MR16 model across North-America, GU10 screw base. Install these Bulbs into all medium screw base fixtures directly..
  • gu10+c 120v 50w for Track&Recessed Lighting, Gu10 Base Bulb, W50MR16/FL/GU10.
  • Please shop with confidence, you have it covered by a full money-back and replacement service, on all orders to allow you to test the suitability of....
Check Stock

RAILBLAZA QuickGrip Paddle Clip Trackmount

  • Paddle holder is 2-3/4 in wide so your paddle will never come out.
  • Works on most standard paddle or pole shafts from 1-1/8 to 1-3/8 inches.
  • There is 2-3/8&Prime between screw holes and the track nuts are included.
  • Comes Track Mount ready right from the package.
  • Has the capability to be mounted directly to kayak as well.
Check Stock

Micro Trader Racing Cars Rally Competition Towing Straps

  • Ideal for towing your car at low speeds on track day (Intended for track use only)..
Check Stock

Hot Wheels Compatible Track C Clamp (Blue)

  • Made to be Compatible with Hot Wheels Cars and Track.
  • All items are created and shipped from the U.S.A.
  • Track and Cars in photo are NOT included.
  • Not Made for Children Under 6 years of Age.
Check Stock

Glide Gear GW100 Video Floor Track Dolly Tripod Swivel Cine Wheels

  • -Aircraft Grade Aluminum / Each assembly can hold up to 200lbs.
  • -1x Track Wheel Set $39 - No tripod or dolly included.
  • -These track wheels attach to most standard floor dolly systems.
Check Stock

Todays Tools scrwgrb001 Screwdriver Grip

  • 6-PIECE STRIPPED SCREW EXTRACTOR SET – this kit includes a screw extractor bit to remove all common sizes of damaged, stripped, or broken screws. BLACK NITRIDE FINISH – helps your tools last longer than normal stainless steel and prevents rust and corrosion..
  • BLACK NITRIDE FINISH – helps your tools last longer than normal stainless steel and prevents rust and corrosion..
  • MODERN TOOL – typically called an easy out or “EZ out”, this black nitrided screw remover and extractor kit improves upon the traditional design with a total of 5 bit sizes..
  • EASY TO USE – PLEASE WATCH THE PRODUCT VIDEO FOR FULL INSTRUCTIONS. Set your drill to reverse/counterclockwise and use a slow drill speed. Begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole. Switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw..
  • MUST-HAVE TOOL – whether you are a handyman, handywoman or contractor, screws sometime get damaged or broken. Keep this set in your toolbox to get the damaged screw out and your project back on track..
Check Stock

Gifts for Men - Damaged Screw Extractor Kit Stripped Screw Extractor Set DIY Hand Tools Gadgets Gifts for Men Broken Bolt Extractor Screw Remover Sets

  • ...cess). Next switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw, and then you can easily remove the screw..
  • MODERN TOOL : Keep this set in your toolbox to get the damaged screw out and your project back on track. Typically called an easy out or “EZ out”, highly suitable for various machinery repair work..
  • QUALITY GUARANTEE - We have carried out strict quality inspection and control on one of our broken screw adapters before they leave the factory, Your damaged screw remover set is backed by our Highest Quality Promise.
Check Stock

Stripped Screw Remover Set - 6 Pieces - Black Nitride

  • 6-PIECE STRIPPED SCREW EXTRACTOR SET – this kit includes a screw extractor bit to remove all common sizes of damaged, stripped, or broken screws. BLACK NITRIDE FINISH – helps your tools last longer than normal stainless steel and prevents rust and corrosion..
  • BLACK NITRIDE FINISH – helps your tools last longer than normal stainless steel and prevents rust and corrosion..
  • MODERN TOOL – typically called an easy out or “EZ out”, this black nitrided screw remover and extractor kit improves upon the traditional design with a total of 5 bit sizes..
  • EASY TO USE – PLEASE WATCH THE PRODUCT VIDEO FOR FULL INSTRUCTIONS. Set your drill to reverse/counterclockwise and use a slow drill speed. Begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole. Switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw..
  • MUST-HAVE TOOL – whether you are a handyman, handywoman or contractor, screws sometime get damaged or broken. Keep this set in your toolbox to get the damaged screw out and your project back on track..
Check Stock

Broken Screw Extractor set Stripped screw remover Easy out bolt extractor set Left hand drill bits 11PCS Screw remover and extractor Grabit pro screw extractor

  • ...cess). Next switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw, and then you can easily remove the screw..
  • MODERN TOOL : Keep this set in your toolbox to get the damaged screw out and your project back on track. Typically called an easy out or “EZ out”, highly suitable for various machinery repair work..
  • QUALITY GUARANTEE - We have carried out strict quality inspection and control on one of our broken screw adapters before they leave the factory, Your damaged screw remover set is backed by our Highest Quality Promise.
Check Stock

Park Sung Tracker Straps and Belt, Foot Trackerstrap for HTC Vive Tracker, Full Body Tracking, Adjustable, Structure and Material Upgrade, 1TrackBelt+2 TrackStraps+1 Ankle Strap

  • Compatible with VIVE Tracker and VIVE Tracker 3.0 (Tracker not includs in package).
  • Perfect for full body tracking - The belt and straps are easily attached to your waist, hands, feet.The package includes an ankle auxiliary strap, which provides greater stability and sense of security, and no longer to worry about detaching or loosening during the game..
  • Loved by hardcore players-using Breathable elastic neoprene material, soft, wear-resistant, non-slip, adjustable,relieve fatigue and sweat caused by long-term gaming..
  • Upgrade Sturdy Screw Base - The screw and the rubber base are integrally formed, which is more firm..
  • Package Includs - Track Belt X 1，Track Strap X 2，Auxiliary Strap X 1.
Check Stock