Top Trailer Brake Assembly

Curt 51110 51383 Venturer Brake Control and Wiring Harness Kit

  • SIMPLE TO INSTALL. This universal wiring harness allows for simple, straightforward trailer brake controller installation. It comes with blunt-cut wires to splice into your vehicle's existing wiring.
  • RELIABLE POWER. This brake controller wiring harness is constructed with quality 12-gauge wires to ensure consistent power between your trailer brake controller, vehicle and electric trailer brakes. The wires are also color-coded.
  • UNIVERSAL. This brake controller wiring is made for universal application, allowing you to splice your CURT brake controller into a variety of vehicles. Vehicle-specific wiring harnesses are also available (sold separately).
  • VERSATILE USE. This trailer brake controller wiring is compatible with any CURT trailer brake controller equipped with a quick plug connector. It also features a 24-inch length for flexible positioning of the brake controller on the dash.
  • PROTECTED WIRES. To keep power flowing and ensure your connection stays well-protected, this trailer brake controller harness comes with a slit-loom sleeve, helping to keep the wires bundled, avoid crushing and resist abrasions.
Check Stock

Southwest Wheel 2-Pack 2LH + 2RH 10 X 2 1/4 TruRyde Self-Adjusting Electric Brakes with Hardware

  • 2-Pack (2LH & 2 RH) TruRyde 10" x 2 1/4" self-adjusting electric brake assemblies.
  • 4 Hole Mounting for 3,500 lbs. trailer axle. Comes with mounting nuts, and lock washers.
  • Contains 2 left and 2 right brake assembly..
  • Works with Al-Ko, Dexter, Lippert,and Quality Trailer Axles.
  • Geniune TruRyde Brakes. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory..
Check Stock

Southwest Wheel 2-Pack 12 X 2 TruRyde Self-Adjusting Electric Brakes with Hardware 2 Right Hand + 2 Left Hand

  • 2-Pack of TruRyde 12" x 2" self-adjusting electric brake assemblies. Contains 2 left and 2 right brake assembly..
  • 5 Hole mounting for 5,200 lbs., 6,000 lbs., and 7,000 lbs. trailer axles..
  • Comes with mounting bolts, nuts, and lock washers.
  • Works with Al-Ko, Dexter, Lippert,and Quality Trailer Axles.
  • Geniune TruRyde Brakes. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory..
Check Stock

M-Parts 2 Pairs of Self-Adjusting 12-1/4 X 3-3/8 12.25 X 3.375 Electric Trailer Drum Brake Assemblies Kit for 8,000 Lbs 8K Trailer Axles 2 LH 77-1208-1 + 2 RH 77-1208-2

  • General duty 12-1/4” X 3-3/8” Trailer Electric Brake Assembly that works with 8,000 lbs Dexter and Lippert (aka LCI) Trailer Axles.
  • 4” bolt circle, 3-7/8” center hole diameter.
Check Stock

CURT 51457 Quick Plug Electric Trailer Brake Controller Wiring Harness, Select Ram 1500, Classic, 2500, 3500, 4500, 5500

  • EASY TO INSTALL. No cutting or splicing required! This vehicle-specific wiring harness allows fast, easy, plug-and-play trailer brake controller installation. NOTE: Software in vehicle must be updated by dealership to accept an aftermarket controller.
  • RELIABLE POWER. This brake controller wiring harness is constructed with quality 12-gauge wires to ensure consistent power between your trailer brake controller, vehicle and electric trailer brakes.
  • VEHICLE-SPECIFIC. This electrical brake controller wiring fits select model years of the Ram 1500, 1500 Classic, 2500, 3500, 4500 and 5500 (without factory integrated brake controller - ITBC).
  • VERSATILE USE. This trailer brake controller wiring kit is compatible with any CURT trailer brake controllers equipped with a quick plug connector -- proportional, inertia and time delay. It also features a 24-inch length for flexible positioning.
  • PROTECTED WIRES. To keep power flowing and ensure your connection stays well-protected, this trailer brake controller harness comes with a slit-loom sleeve, helping to keep the wires bundled, avoid crushing and resist abrasions.
Check Stock

M-Parts 1 Pair of Self-Adjusting 12-1/4 X 3-3/8 12.25 X 3.375 Electric Trailer Brake Assemblies for 9,000/10,000 Lbs 9K/10K Trailer Axles 1 LH 77-1210-1 + 1 RH 77-1210-2

  • General duty 12-1/4” X 3-3/8” Trailer Electric Brake Assembly that works with 10,000 lbs Dexter and Lippert (aka LCI) Trailer Axles.
  • 7 Bolt Holes, 5.5" Bolt Circle, 4.5” Center Hole diameter.
Check Stock

Curt 13328-55336 Trailer Hitch and Wiring Package

  • PORTABLE. The Echo trailer brake controller has a non-invasive install and is easily transferrable from one vehicle to another. It plugs into any....
  • SMARTPHONE-READY. The Echo brake controller wirelessly syncs with your Apple or Android phone, turning it into a brake controller interface with the....
  • ZERO-TOOL INSTALL. Installing this trailer brake controller is as easy as plugging in a 7-way trailer wiring connector. It requires no tools, no extra....
  • HIGHLY RESPONSIVE. Echo uses a triple-axis accelerometer to provide smooth, safe braking. It maintains responsive braking, even when your phone screen....
  • VERSATILE. This electronic trailer brake controller easily transfers between vehicles and trailers and works on virtually any trailer with 1 to 2....
Check Stock

Blue Ox BX88206 Coiled Cable with Female Receptor

  • The Trailer conversion connection wire functions as a converter tool which fit all 2-wire vehicle electrical system to standard 3-wire trailer RV hitch pick up trucks. 2.1 amps signal circuit, 5.0 amps taillight circuit..
  • Our trailer tailight conventer model converts 2-wire system ( left and right turn/brake) to a 3 wire system (left and right turn, brake seperate) also fit some 4 wire to 5 wire trailer light system that allow to split brake and turn signals on pick up trucks into separate wires..
  • Noted: tailgate light/tail light function is not support in this converter so does not run though this converter. Truck can't tell the difference between blinker and brake light. Once you separate both of two, Since it reads AND signals, your additional blinkers won't flash with the hazard lights, but your brake lights will..
  • Easy install by yourself. Standard color code wire connection. Functions was mark on the converters for help you install simultaneously. The best is use a multimeter to ensure the input and output Voltage..
  • The trailer converter is a great tool for trailer to Splice turn signal / brake light ..
Check Stock

CURT Class 3 Trailer Hitch Bundle with Wiring for 2017 Ford Escape - 13186 & 56320

  • PORTABLE. The Echo trailer brake controller has a non-invasive install and is easily transferrable from one vehicle to another. It plugs into any....
  • SMARTPHONE-READY. The Echo brake controller wirelessly syncs with your Apple or Android phone, turning it into a brake controller interface with the....
  • ZERO-TOOL INSTALL. Installing this trailer brake controller is as easy as plugging in a 7-way trailer wiring connector. It requires no tools, no extra....
  • HIGHLY RESPONSIVE. Echo uses a triple-axis accelerometer to provide smooth, safe braking. It maintains responsive braking, even when your phone screen....
  • VERSATILE. This electronic trailer brake controller easily transfers between vehicles and trailers and works on virtually any trailer with 1 to 2....
Check Stock

CURT 57186 4-Way Flat Vehicle-Side to 7-Way RV Blade Trailer Adapter with Brake Controller Wiring

  • BRAKE CONTROLLER CONNECTION. This trailer wiring adapter makes it easy to add wiring for a trailer brake controller. It plugs into a 4-way flat....
  • WEATHER-RESISTANT. This trailer wiring harness adapter comes with a spring-loaded dust cover for the 7-pin wiring socket to protect the terminals from....
  • STANDARD CONNECTION. This trailer hitch wiring adapter plugs into any standard 4-way flat and can be used to connect the taillights, brake lights,....
  • EASY TO INSTALL. This 4-pin to 7-pin trailer adapter with brake controller wiring comes ready to plug into your vehicle or trailer wiring with minimal....
  • DURABLE CONSTRUCTION. For long-lasting use and a reliable connection, the housing of this trailer harness adapter is made from durable black plastic....
Check Stock

CURT 56413 Vehicle-Side Custom RV Blade 7-Pin Trailer Wiring Harness Fits Select Ford F-150 Black

  • EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness plugs into existing original equipment wiring on your vehicle and equips it with....
  • HEAVY-DUTY CONNECTOR. The 7-way trailer wiring assembly can be used to connect trailer taillights, brake lights, reverse light signals, turn signals,....
  • VEHICLE-SPECIFIC. This vehicle-trailer wiring harness package is designed for select models of the Ford F-150.
  • DURABLE CONSTRUCTION. For long-lasting use and a reliable connection, the housing of the 7-pin vehicle wiring socket is made from durable black molded....
  • SPRING-LOADED COVER. To promote long-lasting use and weather resistance, this 7 pin trailer wiring harness kit comes with a spring-loaded dust cover.....
Check Stock

CURT 56366 Vehicle-Side Custom RV Blade 7-Pin Trailer Wiring Harness, Fits Select Honda Pilot, Ridgeline , Black

  • EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness plugs into existing original equipment wiring on your vehicle and equips it with a standard RV blade 7-pin trailer wiring connector for plugging in and towing a trailer.
  • HEAVY-DUTY CONNECTOR. The 7-way trailer wiring assembly can be used to connect trailer taillights, brake lights, reverse light signals, turn signals, electric trailer brakes and an auxiliary power wire.
  • VEHICLE-SPECIFIC. This vehicle-trailer wiring harness package is designed for select models of the Honda Pilot and Ridgeline (factory tow package required).
  • DURABLE CONSTRUCTION. For long-lasting use and a reliable connection, the housing of the 7-pin vehicle wiring socket is made from durable black molded rubber that will never rust or corrode.
  • SPRING-LOADED COVER. To promote long-lasting use and weather resistance, this 7 pin trailer wiring harness kit comes with a spring-loaded dust cover. It protects the 7way RV blade connector when not in use, shielding it from the outdoor elements.
Check Stock