Top Trailer Brake Lights

Nilight - TL-34 2PCS Steel Trailer Light Boxes Housing Kit w/6Inch Oval Red LED Trailer Tail Lights 2 Inch Round Red LED Side Marker Lights w/Grommet Plugs Wire connectors, 2 Years Warranty

  • Trailer towing Light come with 5 functions, 7 Pin Plug and strong magnetic, suitable for USA standard 12V trailer, Caravan , Low loaders , Jet ski Boats Break downs etc.
  • Out light come with 5 functions: Rear Position, Direction Indicator, Brake, Reflector, Number plate light(Right light no license plate light), but not has the back up lights.
  • Red brake lights and flashing orange Direction Indicator lights control by the separate circuit. Red - Brake, Green Right Turn Signal, white - Ground, Yellow - left turn signal and Black - License plate/Running.
  • 4x3.5inch good tail light kit can use on any trailer.
  • 24ft cable to light with a Standard 7 Pin Plug, fit for flat Pin Adapter, then 8ft cable to go across to the the next light. Some trucks, cars, and SUVs are 4-wire systems, this trailer light is not fit for them, please confirm that this trailer light is suitable for the plug socket on your vehicle before ordering..
  • IP68 Waterproof and Submersible: All sealed, which means that water will not damage the diodes or circuit board, excellent tightness makes it be definitely waterproof and submersible.
  • Comes with 2 strong magnetic on the lights for quick and easy fitting an removal of the light.they handle bumpy roads without falling off. Easy to use, plug in a....
Check Stock

FEELOTAM Magnetic LED Trailer Towing Light Kit 24ft Cable with 7 Pin Plug Board Tail Brake Stop Indicator License Plate Light Lamp for Trucks Trailers RVs SUVs

  • Some trucks, cars, and SUVs (like 2005 Nissan Frontier 4x4 nismo, 2001 Ford F550)are 4-wire systems, this trailer light is not fit for them, because Red brake lights and flashing orange Direction Indicator lights control by the separate circuit.
  • Just the 2 yellow light will lighting (not red brake light lighting)when brake if use it to 4-wire systems car..
  • Trailer towing Light come with 5 functions, 7 Pin Plug and strong magnetic, suitable for USA 5 wire shstems standard 12V trailer, Caravan , Low loaders , Jet ski Boats Break downs etc.
  • Out light come with 5 functions: Rear Position, Direction Indicator, Brake, Reflector, Number plate light(Right light no license plate light), but not has the back up lights, 24ft cable to light with a Standard 7 Pin Plug, fit for 5-7 wire flat Pin Adapter, then 8ft cable to go across to the the next light.
  • IP68 Waterproof and Submersible: All sealed, which means that water will not damage the diodes or circuit board, excellent tightness makes it be definitely waterproof and submersible.
  • Comes with 2 strong magnetic on the lights for quick and easy....
Check Stock

12v Magnetic Towing Tow Light Kit Trailer Rv Tow Dolly Tail Towed Car Boat Truck

  • Complete Trailer Light Kit: This Trailer Light Kit includes 2 combination tail and brake/turn signals lights, 2 amber LED marker lights ,25-ft wiring harness,license plate bracket and mounting hardware bag, everything you need to do the install included..
  • IP68 Waterproof and Submersible trailer lights: The circuit board is completely sealed and IP68 waterproof, which protects the board from short circuit even soak in the water, it can work long hour in rainy days, fog day or snow day, it is totally submersible(Test Underwater light for 24 hours)..
  • High Visibility LED Trailer Tail Lights: Super clear and brighter SMD 5050 lamp beads with Halo Glow design produces a super fashion light, no glare, Up to 50,000 hrs life expectancy.
  • Compliant with DOT standards, perfect replacement trailer lights for RV, tractors, canoes,towing vehicle, truck, trailer, boat, bus, Lorry, Van, caravan, snowmobile etc.
  • 25ft wiring harness, so that it is long enough to reach end of trailer,instruction included and 1 year warranty..
Check Stock

CURT 57187 4-Way Flat Vehicle-Side to 5-Way Trailer Wiring Adapter

  • VERSATILE DESIGN. This trailer wiring adapter makes it easy to connect a mismatched vehicle socket and trailer plug, adapting your 4-way flat connector into a standard 5-way flat socket.
  • EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this trailer wiring adapter. It features grips on the sides for a better grip when plugging into the vehicle or unplugging.
  • STANDARD CONNECTION. This trailer hitch wiring adapter plugs into any standard 4-way flat and can be used to connect the taillights, brake lights, turn signals and reverse lights (some splicing required).
  • EASY TO INSTALL. This 4-pin to 5-pin trailer adapter wiring comes ready to plug into your vehicle or trailer wiring with minimal splicing required.
  • DURABLE CONSTRUCTION. For long-lasting use and a reliable connection, the housing of this trailer harness adapter is made from durable molded rubber that will never rust or corrode.
Check Stock

CURT 58140 Trailer-Side 7-Pin RV Blade Wiring Harness Connector

  • EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this trailer plug. It features two hooks on either side of the plug for a better grip when plugging in or unplugging trailer wiring.
  • WEATHER-RESISTANT. This trailer wiring plug comes with concealed wire terminals. This helps protect the splice-in connection points for the wires, keeping them safe from dirt, rain, corrosion and other threats.
  • RELIABLE CONNECTION. This 7-pin trailer wiring plug comes ready to splice into your existing trailer wiring. It can be used to connect the taillights, brake lights, reverse lights, turn signals, trailer brakes and auxiliary power.
  • VERSATILE DESIGN. This connector makes a great replacement 7-way RV blade connector and is interchangeable with virtually any trailer-side 7-way RV connector. 7-pin trailer wiring is commonly used for towing RV travel trailers.
  • DURABLE CONSTRUCTION. For long-lasting use and a reliable connection, the housing of this 7-pin trailer wiring plug is made from durable black plastic that will never rust or corrode.
Check Stock

CURT 58141 Trailer-Side 7-Pin RV Blade Wiring Harness Connector

  • EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this trailer plug. It features two hooks on either side of the plug for a better grip when plugging in or unplugging trailer wiring.
  • WEATHER-RESISTANT. This trailer wiring plug comes with concealed wire terminals. This helps protect the splice-in connection points for the wires, keeping them safe from dirt, rain, corrosion and other threats.
  • RELIABLE CONNECTION. This 7-pin trailer wiring plug comes ready to splice into your existing trailer wiring. It can be used to connect the taillights, brake lights, reverse lights, turn signals, trailer brakes and auxiliary power.
  • VERSATILE DESIGN. This connector makes a great replacement 7-way RV blade connector and is interchangeable with virtually any trailer-side 7-way RV connector. 7-pin trailer wiring is commonly used for towing RV travel trailers.
  • DURABLE CONSTRUCTION. For long-lasting use and a reliable connection, the housing of this 7-pin trailer wiring plug is made from durable black plastic that will never rust or corrode.
Check Stock

Hopkins 50928 Tow Doctor Trailer End Wire Harness Test Unit

  • Designed so that one person can make sure a trailer has been wired properly and all functions are working.
  • Tests all trailer functions - left turn, brake, tail, backup lights, electric brakes, and auxiliary power.
  • Trailer lights illuminate and LED lights on the tester show function operation.
  • Adapts to 4 wire flat, 6 pole round, or 7 RV blade.
  • For electric brakes, magnets are activated to determine correct operation.
Check Stock

SUZCO 25 Foot 4 Wire 4-Flat Trailer Light Wiring Harness Extension Kit 4-Way Plug 4 Pin 21 Male & 4 Female Extension Connector & Wishbone-Style with 18 Gauge White Ground Wire with SAE J1128

  • 【ITEM TYPE】This is a 21ft male & 4 ft female 4-flat marine trailer wiring harness with 4-way conductors and a 2ft white ground wire, made of 18-gauge wire, designed to split at the trailer tongue and run down each side of the trailer. The 4 flat trailer wire is color-coded and bonded wire to easily splice into your trailer's wiring system, no need for splicing wires. This trailer wire harness kit is completely sealed for a long corrosion-resistant installation..
  • 【EXTENSION INCLUDING】This 25foot 4 wire boat trailer wiring extension can conform to the SAE J1128 specification. Extends wiring system provides more flexibility. It can protect tow vehicle electronics from wiring shorts. Includes a 4-feet trunk connector, splices, and clips. This trailer wire harness kit also can work on an COPPER trailer based on the ground wire..
  • 【ENOUGH LENGHT GROUND WIRE】This trailer wire extension with 4 way flat plug connector is designed to supply power for tail lights, turn and brake lights, as well as a ground connection. The white grounding wire is so enough long to wiring. The trailer side ground wire is about 2ft. Trailer wiring harness features a ground wire. The white ground wire is made of 18-gauge, which is corrosion resistant terminal..
Check Stock

Partsam Submersible Under 80\ LED Trailer Light Kit,Square Stop Turn Tail RV Truck Lights w/Wire &Bracket,Red/Amber Side Fender Marker Lamps,3rd Brake ID Light Bar for Camper Truck RV Boat Snowmobile

  • Package included: this 12v led trailer lights kit has verything you need, 2Pcs square combination tail lights, 6Pcs Mini Oval side fender marker lights (2Red+4Amber), 1Pc 15 Inch Trailer 3rd brake identification light bar, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. Provides you with great convenience to upgrade your trailer lights at once.
  • Multi Functions: Function as running light, stop light, brake light, turn signal light, reverse light, flash light, rear reflex reflector, side marker light, side reflex reflector, license plate illuminator, clearance Light, identification light bar.
  • High Btightness: 15 Diodes ( 12 Red+3 Red ) LED Combination stop turn tail side marker light w/reflector-Curb side.
  • 19 Diodes ( 12 Red+3 Red+4 White ) LED Combination stop turn tail side marker light w/reflector-Street side with license illuminator.
  • Advanced LED combination lights with better heat distribution, brighter and more energy-efficient than halogen bulbs. Guarantees reliable visibility and safety even in inclement weather.
  • Waterproof: The square trailer lights kit is completely sealed, it mean no water can enter inside to damage the circuit board. The screws have been removed from the l....
Check Stock

SUZCO 36 Ft 4 Wire 4-Flat Trailer Light Wiring Harness Extension Kit, Custom-Made 28' Male & 8' Female with 4' White Ground Wire, 4-Way Plug 4 Pin Male & Female Extension & Wishbone-Style & SAE J1128

  • 【ITEM TYPE】This is our SUZCO custom-made vehicle-specific 36FT male & female 4-flat marine trailer wiring harness with 4-way conductors and a 4' white ground wire, it fits for longer trailers and for customers desiring to wire, made of 18-gauge wire, designed to split at the trailer tongue and run down each side of the trailer. This trailer wire harness kit is completely sealed for a long corrosion-resistant installation..
  • 【36' EXTENSION INCLUDING】This 36foot 4 wire boat trailer wiring extension can conform to the SAE J1128 specification. Extends wiring system provides more flexibility. It can protect tow vehicle electronics from wiring shorts. Includes a 4-feet trunk connector, splices, and clips. This trailer wire harness kit also can work on an aluminum trailer based on the ground wire..
  • 【ENOUGH LENGHT GROUND WIRE】This trailer wire extension with a 4 way flat plug connector is designed to supply power for tail lights, turn and brake lights, as well as a ground connection. The white grounding wire is so enough long to wiring. The trailer side ground wire is about 2ft. Trailer wiring harness features a ground wire. The white ground wire is made of 18-gauge, which is corrosion-resistant terminal..
  • 【4-WAY CONNECTORS & FITMENT】You can inst....
Check Stock

CURT 56056 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select GMC Acadia

  • EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.
  • STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a variety of trailers, adding versatile towing options for your vehicle.
  • VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the GMC Acadia.
  • EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this vehicle socket. It features tabs on the top and bottom for a better grip when plugging into your trailer or unplugging.
  • DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements.
Check Stock

CURT 57224 4-Pin Round Vehicle-Side to 4-Way Trailer Wiring Adapter Black

  • VERSATILE DESIGN. This trailer wiring adapter makes it easy to connect a mismatched vehicle socket and trailer plug, adapting your 4-way round....
  • EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this trailer wiring adapter. It features tabs on....
  • STANDARD CONNECTION. This trailer hitch wiring adapter plugs into any standard 4-way flat and can be used to connect the taillights, brake lights and....
  • NO-SPLICE INSTALL. This 4-pin round to 4-pin flat trailer adapter wiring comes ready to plug into your vehicle or trailer wiring with zero splicing....
  • DURABLE CONSTRUCTION. For long-lasting use and a reliable connection, the housing of this trailer harness adapter is made from tough black plastic.
Check Stock