Top Trailer Hub Kit

The ROP Shop Pack of 4 Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle

  • Replacement (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (4) Idler Hub with Lug Nuts, (4) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (8) Inner/Outer Bearings, (4) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (4) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The Trailer Parts Outlet 3500 lb Light Duty Single Trailer Axle Kit with Suspension - Leaf Springs Hanger & U-Bolt kit 89 Hubface - 74 Spring Center 6 4 Frame 5x4.5 Bolt Pattern

  • All-in-One Bundle: This 3.5K LD Single Axle trailer kit includes everything you need for a quick and easy installation, such as a 3.5k Idler Axle, double eye hanger kit, 4-Leaf Double Eye Springs, and 2 1.75k U-Bolt Kits.
  • High Strength Construction - The high strength steel axle tube construction ensures a durable and long-lasting performance for small utility trailers, cargo trailers, ATV trailers, and more.
  • High-Quality Parts - Made with OEM grade trailer axles and suspension, this kit is packed with high-temp axle grease for reliable performance.
  • Low Ride Height - With an underslung design, the axle is welded with spring seats on the bottom, allowing for a lower ride height and improved stability.
  • EZ Lube Design - Removable rubber plug allows for easy access to a grease-able zerk fitting, allowing you to grease your axle without having to remove the entire hub.
Check Stock

The Trailer Parts Outlet 3500 lb Light Duty Single Trailer Axle Kit with Suspension - Leaf Springs Hanger & U-Bolt kit 73 Hubface - 58 Spring Center 5 0 Frame 5x4.5 Bolt Pattern

  • All-in-One Bundle: This 3.5K LD Single Axle trailer kit includes everything you need for a quick and easy installation, such as a 3.5k Idler Axle, double eye hanger kit, 4-Leaf Double Eye Springs, and 2 1.75k U-Bolt Kits.
  • High Strength Construction - The high strength steel axle tube construction ensures a durable and long-lasting performance for small utility trailers, cargo trailers, ATV trailers, and more.
  • High-Quality Parts - Made with OEM grade trailer axles and suspension, this kit is packed with high-temp axle grease for reliable performance.
  • Low Ride Height - With an underslung design, the axle is welded with spring seats on the bottom, allowing for a lower ride height and improved stability.
  • EZ Lube Design - Removable rubber plug allows for easy access to a grease-able zerk fitting, allowing you to grease your axle without having to remove the entire hub.
Check Stock

SUNCARACCL 4PCS 1.98" Trailer Hub Bearing Dust Caps, Trailer Axle Dust Cap Wheel Center Caps Grease Covers with 4 Rubber Plugs for 2000 to 3500 lb Dexter EZ Lube Trailer Boat Trailer Camper RV

  • [What You Get] The package includes 4 pieces of trailer hub caps with 4 pieces of rubber plugs, enough to meet your daily use or replacement.The extra 4 rubber plugs can be used for emergency or shared with friends or relatives who have a trailer..
  • [High Quality Material]These dust caps are made of high quality carbon steel and rubber,which is strong and durable,not easy to break, deform, corrode, rust..
  • [Detailed Size]Our wheel center cap is 1.98" wide and 1.3" high,fits for most standard 2000 -3500 lb trailer wheel hub..
  • [Practical Design]The grease covers are designed with removable rubber plug,easy to install and replace.It can effectively protect your trailer hub from dust for longer lasting use..
  • [Satisfaction Guarantee]Unconditionally refund or free replace if defective or any quality problems. Any problem please feel free to contact us, we offer life-time friendly customer service..
Check Stock

CCI IWC435-17C 17 Inch Bolt On Chrome Finish Hubcaps - Pack of 4

  • Set of 4. Phoenix USA Brand Chrome Plated ABF Plastic, Quick Trim, Trailer Hub Covers..
  • Fits 16" trailer wheels with eight 13/16" hex conical lug nuts on 6.5" bolt circle..
  • Depth of hub covers is 4". They will fit over most hubs, but not bearing buddies..
Check Stock

Trailer Butler Portable Electric Trailer Dolly

  • Electric trailer dolly moves up to 12,000 pounds.
  • Heavy duty trailer dolly is portable, travels on the trailer..
  • 12 volt battery powered trailer dolly is pre-wired and ready to use..
  • Single tire design makes this the easiest turning trailer dolly on the market..
  • Easily moves trailers on all surface types including gravel, rocks, grass, asphalt, concrete, and inclines. Patent pending design transfers.
  • Heavy duty steel construction means our products are built to last..
  • Auto braking feature for safety. Trailer Brake control standard on XHD model.
  • Patent pending design delivers maximum traction for unmatched performance on multiple surface types..
  • Works on all trailer types including travel trailers, boat trailers, food concession trailers, and cargo trailers..
Check Stock

12 Golf Cart Wheels and Tires Machined/Black Set of 4

  • Includes: (4) Brand New 215/40-12 DOT Approved Street Tires, (4) 12"x7" VAMPIRE Machined Aluminum Wheels, (4) Chrome Center caps, (4) Sets of Chrome....
  • This wheel and tire combo measures 18.5 inches in diameter.
  • NO LIFT KIT NEEDED! for most carts (see description below).
  • DOT Approved Street Tire Tread. Great for asphalt, pavement, and turf!.
  • Come mounted and aired up to the proper pressure and fits any Golf Cart, UTV, or Trailer hub that is 4 bolt and measures 4x4" (4x101.6mm).
Check Stock

14\ Vampire Gloss Black Aluminum Golf Cart Wheels and 23X10-14 All Terrain Golf Cart Tire Combo - Set of 4

  • Includes: (4) Brand New 20x10-10 All Terrain Tires, (4) 10"x7" Black Steel Wheels.
  • This wheel and tire combo measures 20 inches tall.
  • Lift kit NEEDED for Club Car Golf Carts. EZGO (txt, rxv) and YAMAHA (drive) can fit this combo with no lift kit (stock suspension).
  • DOT All Terrain tread that is made for the road with the veritility to go off road.
  • Come mounted and aired up to the proper pressure and fits any Golf Cart, UTV, or Trailer hub that is 4 bolt and measures 4x4" (4x101.6mm).
Check Stock

GREPSPUD 4pcs 1.98'' Trailer Hub Bearing Dust Caps, Trailer Axle Dust Cap Cup Wheel Center Grease Cover Caps & 4pcs Extra Rubber Plugs for 2000 to 3500 lb Boat Trailer Dexter EZ Lube Trailer Camper RV

  • 【WITH EXTRA 4 SEALS】- You will receive 4pcs 1.98 inches trailer axle covers & 4pcs extra rubber plug, enough to meet your daily use or replacement. The extra 4 rubber plugs can be used as spare parts in case of emergency. This is a value-for-money set!.
  • 【HEAVY DUTY & ANTI-RUST】- These trailers dust caps are made of high quality carbon steel and rubber, surface zinc-plated, strong and durable, not easy to deform, anti-corrosion & anti-rust, long-term service for your trailer..
  • 【PRACTICAL TRAILER PARTS】- The trailer axle cap is designed to avoid the trailer axle from dust, preserve the grease, prevent axle corrosion and as decoration. Hub grease caps are designed with removable rubber plugs, easy to install and maintain..
  • 【SIZE & COMPATIBLE WITH】- OD: 1.98 inch/50.4mm. Please check the size information and compatibility carefully before placing an order. Fits most standard 2000 -3500 pounds trailer wheel hub for both types of axles EZ Lube and standard. Fits standard brake & idler trailer axles for most 4 lug & 5 lug axles with 1.98 in diameter cap..
Check Stock

JDMSPEED 2 Trailer Idler Hub Kits 5 on 4.5 Replacement for Axle 1-1/16 Bearings 2000 lbs - 22016K

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle.
  • Kits also include: 4x L44649 outer cone bearings, 2x Grease seals 1-1/16", 2x E Z lube grease caps with rubber plug.
  • Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed.
  • Note: This hub fit straight spindles, not for tapered spindles.
Check Stock