Top Trailer Wheel Bolt Pattern Guide

Bob the Drag Queen: Suspiciously Large Woman

  • 4 x trailer 5 on 4.5" hub drum kits + 4 x 10"x2-1/4" electric brakes for Dexter and other brands 3,500 lbs trailer axle.
  • Drum Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed, Ref part #. 008-247-05, 84546.
  • Kits also includ: 4x L68149 inner cone bearings and 4x L44649 outer cone bearings, 4x Grease seals 1.719" x 2.565", 4x E Z lube grease caps with rubber plug.
  • Also include: 2 left + 2 right 10"x2-1/4" electric brakes with 3" center bore and 4" mounting bolts circle diamter.
Check Stock

Seachoice Trailer Coupler, Repair Kit, 2 in.

  • Quickly mounts to your trailer tongue. Choose from vertical channel mount (fits 3-1/2 inch wide OD / 3 inch ID vertical channel with 2 inch on center bolt pattern secure with 5/8" pins or bolts) or square plate 4 bolt mount (4-1/2 inch square bolt pattern).
  • Smoother safer towing. Improves your ride, reduces wear & tear on pickup & trailer. Great for heavy duty trailers from end dumps, race trailers, cargo trailers, tilt trailers, storage container & flat beds Instant air ride for your trailer..
  • 20,000 lbs rated trailer towing capacity with a cast 2 5/16 inch heavy duty demco cast coupler. 2,000 lbs tongue weight. Great for bumper pull race trailers, dump trailers and skid steer trailers..
  • Air ride technology: Built-in HD air bag for a smoother towing experience with built in height adjustment plus weight adjustable. Perfect when you don't know what pickup will be towing your trailer. Fine tune for your towing weight. Just add air for heavier loads. Absorbs the road bumps, thumps & bangs on whatever road you travel.
  • Made by Shocker Hitch USA. Optional weld-on vertical tongue adapter available &sold separately. Note: The main pivot bolt used in the Tongue Mount air coupler is a custom made 1 inch diameter 1045 medium carbon steel bolt. Heat treated to pre....
Check Stock

Lucky Seven 20904439 GM Original Equipment Trailer Brake Continue Relay Assembly,20904439 Brake Control Relay，GM 20904439 Trailer Brake Control Relay Silverado Sierra

  • UNIVERSAL ELECTRIC TRAILER BRAKES - Self-Adjusting Electric Trailer Brakes 1 right brake of the 12'' X 2'' Trailer Electric Brake Assembly.
  • DIMENSIONS - 12'' diameter x 2'' wide, 5'' bolt circle, 3 1/4'' center hole diameter.
  • BOLT PATTERN - Mounting flange bolt pattern: 5-bolt (each brake).
  • HARDWARE - 10 x 3/8'' nuts and 10 x 3/8'' lock washers are included.
  • M-PARTS AUTO- M-Parts Auto specializes in trailer parts & accessories using the highest quality materials.
Check Stock

Shocker Hitch Vertical Channel Weld On Tongue Adapter for Trailer A-Frames Completely Welded

  • Trailer Tongue Vertical Channel Style Weld On Adapter for Trailer A-Frame. Trailer Tongue Vertical Channel Style Weld On Adapter for Trailer A-Frame..
  • Equipped with 6 Adjustment Holes. Raw Steel. The six bolt hole pattern works great with typical vertical channel bolt on trailer couplers. Actual vertical channel is 3-1/2" x 11-3/4" w/ 2" on center bolt pattern.
  • The outer front is 4" wide, the outer rear is 11" wide. From front to back it measures 7-1/2". Weight Rating: If you are using 2 bolts to attach coupler then its 14,000 lbs if using 4 bolts then 20,000 lbs that also assumes this kit is properly weld onto the trailer and the coupler you are using can handle those respective capacities..
  • Allows you to convert your trailer a-frame to one that accepts Vertical Channel couplers. Welding required for installation..
  • 3 Style to choose from - Completely Welded, Spot Welded & Components Only (2 Sides,Base & Vertical Channel). Made in the USA by Shocker Hitch - Arthur, ND.
Check Stock

NBJINGYI 6 Trailer Swirl Jack Caster Wheel Replacement 1200lbs Capacity with Bolt and net

  • 6" 2000lbs Replacement trailer jack wheel.
  • Replacement caster wheel with bolt and net.
  • NBJINGYI specializes in the production of trailer accessories. It has a group of professional and advanced production equipment and technical....
Check Stock

GREPSPUD 2Sets Trailer Idler Hub Kits 5 on 4.5 for 3500 lbs Trailer 1-1/16'' to 1-3/8'' Axle, with Extra Dust Caps & Rubber Plugs, 5x4.5 Trailer Replacement Hub 5-Hole Trailer Wheel Hub Kit 5 Lug Bolt

  • 【WITH EXTRA 2 DUST CAPS & 4 SEALS】- Fits 3500lbs Trailer 1-1/16'' to 1-3/8'' Axles, Spindle #84, EZ-Lube Axle. You will receive 2 sets of 5x4.5'' trailer hubs and all the hardware parts you will need, you don't have to go anywhere else to buy parts. Our kit also comes with extra 2pcs dust caps & 4pcs rubber plugs, can be used as spare parts in case of emergency. This is a value-for-money set!.
  • 【SIZE & COMPATIBLE WITH】- Trailer axle dust cap (O.D: 1.98''), L44649 outer bearings (I.D: 1-1/16''), L68149 inner bearings (I.D: 1-3/8''), Grease seals (2.56" O.D - 1.72" I.D), Lug nuts (1/2''-20 thread). Please check the size information and compatibility carefully before placing an order. Fits 1-1/16'' to 1-3/8'' spindles 3,500 pounds trailer..
  • 【BOLT PATTERN】- 5 on 4.5'' bolt pattern idler hub with 1/2”-20 studs and bearing races installed..
  • 【HEAVY DUTY & ANTI-RUST】- These hardware are made of high quality steel and rubber, strong and durable. Wheel hub surface with black coating,....
Check Stock

JDMSPEED 2 Trailer Idler Hub Kits 5 on 4.5 Replacement for Axle 1-1/16 Bearings 2000 lbs - 22016K

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle.
  • Kits also include: 4x L44649 outer cone bearings, 2x Grease seals 1-1/16", 2x E Z lube grease caps with rubber plug.
  • Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed.
  • Note: This hub fit straight spindles, not for tapered spindles.
Check Stock

LIBRA Set of 2 Trailer Idler Hub Kits 5 on 4.5 for 1-1/16 Straight Spindle 2000lbs Axles- 22016K

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle.
  • Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed.
  • Kits also includ: 4x L44649 outer cone bearings, 2x Grease seals, 2x E Z lube grease caps with rubber plug.
  • pls noted, this hub fit straight spindles, not for tapered spindles.
Check Stock

Extreme Max 5001.5759 3-Piece Motorcycle Wheel Chock - 5.5\ Wide

  • Economical wheel chock for motorcycle tires up to 5.5" wide.
  • Mounts to a motorcycle trailer, truck bed or garage floor.
Check Stock

M-parts M-Parts Trailer Brakes - 2 Pair 12x2 Self Adjusting Electric Trailer Brakes, 7,000 lb Trailer Axle - Trailer Brake Kit, Electric Trailer Brakes, Trailer Brake Assembly, 7k Trailer Brakes

  • UNIVERSAL ELECTRIC TRAILER BRAKES - Self-Adjusting Electric Trailer Brakes 2 Sets of the 12” X 2” Trailer Electric Brake Assembly.
  • DIMENSIONS - 12” diameter x 2” wide, 5” bolt circle, 3 1/4” center hole diameter.
  • BOLT PATTERN - Mounting flange bolt pattern: 5-bolt (each brake).
  • HARDWARE - 10 x 3/8" nuts and 10 x 3/8" lock washers are included.
  • M-PARTS AUTO- M-Parts Auto specializes in trailer parts & accessories using the highest quality materials.
Check Stock

Semi Truck Spare Tire (or Tire and Rim) Carrier, Adjustable, Powder Coated, Universal Fit, STAR Fabrication, 3510,

  • Trailer U-Bolt Spare Tire Holder Bracket made of grade 8.8 steel, Zinc Plated, beautiful and practical..
  • U-Bolt Length: 8-1/2'', Width:3-1/4'' - 3-3/4'', Thread Diameter: 7/16-20 UNF, Thread Length: 3''. Fits trailer frames up to 2" or 3" wide.
  • For 4 or 5 lug wheels (bolt pattern: 4 on 4 or 5 on 4-1/2). Thread diameter 7/16-20 UNF..
  • Put bolt around trailer throat and tighten.Tire is mounted along side of trailer protect..
  • The device is very basic, but it fit perfectly around the trailer throat, and also on the tire rim.This carrier easily installs to secure your tires..
  • The kit provides the u-bolt and two nuts. Thread diameter 7/16-20 UNF. Note: Please confirm your tire size..
Check Stock

COLOFULWAY 8 inches Self Centering Boat Trailer Keel Roller (Blue)

  • Includes one pair of Heavy-Duty Roller Guide-Ons with an easy, bolt-on installation that fits bunk or roller-style trailer frames up to 3" wide x 4. 25" tall.
  • Custom-formed 97° arms and 13" roller assembly.
  • up to 14" (3" trailer frame) or 16" (2" trailer frame) of horizontal adjustment.
  • Zinc-coated for freshwater corrosion-resistance, not intended for use in saltwater or brackish water.
  • The size and shape of trailer frames can vary drastically, please measure your boat on the trailer before ordering to ensure a proper fit.
  • 6" bolt kits are available for trailer frames up to 5" tall.
Check Stock