Top Trailer mounted Drilling Rig

Happybuy 10''/255MM Diamond Core Drilling Machine 4450W Wet Dry Diamond Core Drill Rig for Concrete Drilling Boring (Drill Bit Dia:4.25\/108MM)

  • 10 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 4450W copper motor. Maximum Speed: 580RPM. Maximum Coring Diameter: 10"/255 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair railings, and repairing highways, etc..
Check Stock

TLAPS 7422442993970 For 2007-2014 Ford Edge / 2007-2015 Lincoln MKX Class 3 III Black 2\ Trailer Hitch Receiver With 2 Inch Drop Loaded Ball Mount

  • Application: For 2007-2014 Ford Edge Models, 2007-2015 Lincoln MKX All Models ( Attention Note: Will Not Fit 2009-2013 Ford Edge Models With EcoBoost Engine, Drilling Is Required ).
  • Trailer Hitch + Loaded Ball Mount ( Trailer Ball, Pin & Clip Are Included ).
  • Hitch Class: Class 3, Receiver Size: 2" Receiver Tube, Towing Specifications: Weight Carrying Capacity - 4000 lbs, Tongue Weight - 400 lbs, Weight Distribution - N/A, Weight Distribution Tongue Weight - N/A.
  • Loaded Ball Mount: Receiver Size: 2" Receiver Tube, Towing Specifications: Gross Trailer Weight - 3500 lbs, Tongue Weight - 350 lbs, Trailer Ball Diameter - 1.875, 2" Drop For Trailer Leveling, Length" 8 1/4.
Check Stock

MAYASAF Spare Tire Hoist 924-528 Wheel Carrier Hoist Spare Tire Winch for Ford 99-07 F250(F350) Super Duty, for 99-07 F450/F550 Truck

  • Durable Trailer Tire Mount: Creates an exterior spare tire location on your trailer or RV.
  • it attaches easily without the need for drilling.
  • Heavy-Duty Design: Spare tire carrier for trailer is made of sturdy powder-coated steel and zinc-plated hardware.
  • the RV spare tire mount fits trailer tongues up to 6-inch tall and 3.5-inch wide.
  • Easy Installation: Near universal-fit camper spare tire mount mounts to trailers easily and doesn't require a permanent mount.
  • Compatibility: The spare tire carrier is ideal with 4 lug x 4 inch-diameter hole pattern, 5 lug x 4.5 inch-diameter hole pattern, and 5 lug x 4.75 inch-diameter hole pattern.
  • Quality Products: Camco makes quality products for RVing, boating, camping, towing, tailgating, and grilling that help take your passion for the outdoors to the next level.
Check Stock

Auto World Semi-Frozen Extreme Conditions 14' Slot Race Set

  • 1-Peterbilt Conventional w/Standard Freight Trailer - Alaskan Highway Heavy Haulers Racing Rig (Lighted).
  • 1-GMC Astro Cabover Semi with Oil Tanker Trailer - Tundra Oil Exploration Racing Rig (Lighted).
Check Stock

VEVOR Core Drill Machine 305MM/12 Inches Core Drill Rig 4800W Powerful Rugged Diamond Concrete Core Drill with Stand Tool Wet Dry Concrete Brick Block Drilling (Drill Bit Diameter: 4'/100MM)

  • 12 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 4800W copper motor. Maximum Speed: 500RPM. Maximum Coring Diameter: 12"/305 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair railings, and repairing highways, etc..
Check Stock

VEVOR Diamond Core Drill Rig, 1980W 6.3'/160 mm, 1600RPM Variable Speed Core Drill Rig with Stable Stand Base, Wet and Dry Drilling Machine for Hard Stone, Concrete, Marble, Granite, Brick

  • 6 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 2180W copper motor. Maximum Speed: 1600RPM. Maximum Coring Diameter: 6"/2160 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair railings, and repairing highways, etc..
Check Stock

Happybuy Diamond Core Drill, 2180W 7\/180 mm, 1600RPM Variable Speed Core Drill Rig with Portable Case, Handheld Drilling Machine for Hard Stone, Concrete, Marble, Granite, Brick

  • 7 inch Max Drilling Diameter: 2180W powerful motor of the handheld core drill rig is designed for wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors, and more. With a 7"/180mm max drilling diameter and 1600RPM stepless speed, you can drill with less effort..
  • Durable Steel Output Shaft & Copper Inlet: As the machine will work upside down, water will unavoidably flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Over-current Protection: We also provide an overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Comfortable Shoulder Rest & Handle: The upgraded shoulder rest is designed to save your energy. The slip-proof rubber handle greatly enhances friction and reduces vibration to completely control the hammer with comfort. Besides, tools are well stored and sorted in a compact case..
  • Wide Range of Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair ra....
Check Stock

Qualward Spare Tire Mount Bracket for Trailer, Spare Tire Carrier Powder Coat Steel Black, Fits Most 4 & 5 & 6 Lugs Wheels on 4\

  • Compatibility & Fit: This trailer spare tire carrier is designed to fit trailer tongues, including boat trailers’, to 2.95″wide and 3.94″ high, and is further upgraded to hold 4-lug and 5-lug wheels with 3.94″, 4″, 4.25″ and 4.72″ bolt patterns..
  • Tough Construction: Made of forged iron with solid-state welding, this spare tire mount is designed to handle tires of up to 120 lbs, and Zinc plated spare tire mount and mounting hardware is naturally resistant to rust and corrosion..
  • Easy Installation: The bolt-on installation and removal is easy. No drilling is required for installation, thanks to the included tire plate and mounting hardware, which makes this spare tire mount a breeze to install and use..
  • Optimized Design: The spare tire bracket provides easy access in the event that it is needed, and the close-to-trailer design helps reduce wind resistance, and it also features raised design that moves the wheel up for increased ground clearance..
  • Peace of Mind: Ideal for mounting your spare tire vertically to the side of trailer tongue or frame rails, and the package includes zinc plated mounting hardware, you don’t have to buy bolts and nuts separately..
Check Stock

Happybuy 8 Inch/205MM Diamond Core Drilling Machine 3980W Diamond Core Drill Rig with Stand and Drill Bits,Wet Dry Core Drill Rig for Diamond Concrete Drilling Boring (Drill Bit Diameter: 4.25'/108MM)

  • 8 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 3980W copper motor. Maximum Speed: 750RPM. Maximum Coring Diameter: 8"/205 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair railings, and repairing highways, etc..
Check Stock

Happybuy 6 Inch/160MM Diamond Core Drilling Machine 2180W Diamond Core Drill Rig with Stand and Drill Bits,Wet Dry Core Drill Rig for Diamond Concrete Drilling Boring (Drill Bit Diameter: 4.25'/108MM)

  • 6.3 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 2180W copper motor. Maximum Speed: 1600RPM. Maximum Coring Diameter: 6.3"/160 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair railings, and repairing highways, etc..
Check Stock

VEVOR Core Drill Machine 305 MM 12 Inches Core Drill Rig Powerful Rugged Diamond Concrete Core Drill 110V 500 r/min Core Drill Rig Tool Wet Dry Concrete Brick Block Drilling 4800W 45 Degree Rotation

  • 12 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 4800W copper motor. Maximum Speed: 500RPM. Maximum Coring Diameter: 12"/305 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and 45-degree rotatable large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate. Two casters for easy transport..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced co....
Check Stock

VEVOR 12Inch/305MM Core Drill Machine,4800W Core Drill Rig,Powerful Rugged Diamond Concrete Core Drill,110V 500r/m Wet Dry Concrete Brick Block Drilling Machine (Drill Bit Diameter:4.5'/114MM)

  • 12 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 4800W copper motor. Maximum Speed: 500RPM. Maximum Coring Diameter: 12"/305 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and 45-degree rotatable large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate. Two casters for easy transport..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair railings, and repairing highways, etc..
Check Stock