Top Transmission Cooler Hose Fitting

LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)

  • This PTFE Nylon Braided Fuel Hose are specially designed to work in any automotive project. this hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility..
  • PTFE Nylon Braided fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
  • Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
  • This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
  • 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
Check Stock

BD Diesel 1064484SM Transmission Kit Complete Trans Incl Complete Torque Converter Enhanced Stall Stage 4 Transmission Kit

  • Replace Part Number: 68253200AA, 68004317AA, 5086946AA, 5086946AB. Please check OE part number before purchase..
  • Transmission Fluid Heat Exchanger compatible with 2003 2004 2005 2006 2007 2008 2009 Dodge Ram 2500 5.9L 359CU. IN. L6 DIESEL OHV TURBOCHARGED,....
  • Updated removable brass AN O-ring fitting adapter, which is removeable, stronger and leakless. The 8AN Male Flare fitting size is the same with OEM,....
  • Trans Torque Converter Oil Cooler mounted to the side of the engine, it uses engine coolant to heat and or cool the trans fluid coming directly out of....
  • It is critically important to use care when installing the cooler lines to the cooler. Professional installation is highly recommended. Transmission....
Check Stock

3Ft 6AN 3/8" Fuel Line Hose Braided Stainless Steel W/2pcs AN6 Hose Fitting Kit Blue & Red Universal for Racing Fuel, Gas, Coolant etc

  • Stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas ,vacuum, hydraulic fluid, lube, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line..
  • Braided Steel Fuel Line Maximum Working Pressure (psi): 1000 psi. Bursting Pressure(psi): 6000psi. Working Temperature Range: -40℉ to 257℉(-40℃ to 125℃). Please make sure the pressure and temperature range is suitable for your application before purchase..
  • Include a universal 3Ft fuel hose and 2pcs swivel hose ends.
  • Inner Diameter: AN-6 (3/8") - Outer Diameter: AN-9 (9/16").
  • Double stainless steel braid cover for excellent flexibility and resistance to abrasion. This hose is perfect for extreme environments where there is extra heat or where chaffing might occur..
  • Professional installation is highly recommended. Warranty: CarBole offers 3-month warranty for the steel braided hose..
Check Stock

EVIL ENERGY Transmission Torque Converter Oil Cooler Compatible with 2003-2009 Dodge Ram 2500 3500 5.9L L6 Diesel 68004317AA 5086946AA Steel Bracket

  • Replace Part Number: 68253200AA, 68004317AA, 5086946AA, 5086946AB. Please check OE part number before purchase..
  • Transmission Fluid Heat Exchanger compatible with 2003 2004 2005 2006 2007 2008 2009 Dodge Ram 2500 5.9L 359CU. IN. L6 DIESEL OHV TURBOCHARGED,....
  • Updated removable brass AN O-ring fitting adapter, which is removeable, stronger and leakless. The 8AN Male Flare fitting size is the same with OEM,....
  • Trans Torque Converter Oil Cooler mounted to the side of the engine, it uses engine coolant to heat and or cool the trans fluid coming directly out of....
  • It is critically important to use care when installing the cooler lines to the cooler. Professional installation is highly recommended. Transmission....
Check Stock

6AN 5Feet Stainless Steel Nylon Braided Fuel Line Hose Oil Gas Hose Oil Line Hose Silver

  • 【Material】Outside Hose Material: Coverd with High Quality Nylon and Stainless Steel Wires.
  • Inner Hose Material: CPE Synthetic Material Hose..
  • 【CPE Braided Hose】Mostly can be work with coolant, diesel, oil, hydraulic fluid, pump gas, air and fuel. Please notice that the service life might be shorter when it work with fuel..
  • 【Application】This braided hose can be used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect..
  • 【Performance】Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • 【Note】Not recommended installation in corrosive environment, braided fuel line's service life will be influenced..
Check Stock

EVIL ENERGY 10AN Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE 10FT Black

  • Application: AN10 braided fuel line widely used as transmission cooler line, fuel return line, fuel supply line, coolant fluid hose, engine cooler line..
  • Nylon and stainless steel braided fuel line can be compatible with transmission fluid, coolant, oil, pump gas, race gas, vacuum, hydraulic fluid, diesel and fuel..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Inside Diameter: 9/16". Outside Diameter: 0.78inch. Length: 10 Feet. Please measure before purchase!.
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

Transmission Oil Cooler LPD47391 Low Pressure Drop Trans Cooler 40000 GVW OC-4739-1 LPD-4739-1 with Mounting Hardware (Silver)

  • Fitment:LPD47391 Advanced Cooling Protection for Car, Van, Light Truck, R.V. and Towing Applications.Suitable for applications up to 40,000lbs Gross Vehicle Weight.
  • High-Quality: Precise fin Spacing.Reliable, Durable Brazed Aluminum Construction..
  • Function:Self-regulating flow for maximum lube flow protection through cold start-up, varied temperatures and driving conditions, heavy loads and towing.
  • Package included: Transmission Oil Cooler,Bolts, nuts, washers, mounting straps, Brass fittings, high-quality cooler hose,hose clamps(No installation instructions).
  • NOTE: This kit is NOT intended for operation below 32 degrees Fahrenheit.
Check Stock

Derale 13950 Atomic-Cool Remote Cooler , Black

  • Universal:universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
  • Installation location:choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
  • Function:keep oil temperature low, help to improve the lubricating effect of engine oil, prevent parts damage ,or even seizure of the engine.Usable to cool down engine oil,transmission, and rear-differentials.Besides,this stacked-plate oil cooler design smaller and lightweight suitable for narrow space..
  • Size:10AN 30Row oil cooler,oil capacity:0.74L.Test pressure: 116psi,burst pressure:232psi.Material:aluminium alloy..
  • Package Include:1pc 30row engine oil cooler.2pcs 10an female to 8an male fittings,2pcs 10an female to 6an male fittings.Can be used to connect 8AN / 6AN braided fuel line hose ends..
Check Stock

NEXADD Fuel Line Pliers Set 4Pcs | Hose Remover Pliers | 9 Inch Fuel Filter Caliper | Hose Pipe Clamp Clip | 80 Degree Disconnect Pliers Set for Auto Maintenance with Storage Case

  • ...d 80 degree disconnect pliers . You’ll save about 30 percent when you buy NexADD fuel line pliers combo kits instead of buying each tool . Just Add to Cart!.
  • Hose Remover Pliers★-The best tool for removing hose clamps for fuel and small water hoses.To remove hoses from transmission,rubber hoses connect to cooler lines. Even if can't fit both sides (hose/tube)between fitting and hose.Slide one side in and work hose out then get both sides in, give handles a squeeze and Voila" off comes hose.Hose remover pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners,etc.Remove fuel vacuum or heater hoses from 5/32”to 1/2”(4mm to 14mm)..
  • Fuel Line Clip Removal Pliers ★-The fuel line clip removal pliers suitable for removal and replacement of connections on fuel filter lines (petrol & diesel).Required when removing and replacing fuel filters.Upgarded maximum opening approx: 9.3CM/3.66IN.NexADD fuel line clip removal tool suitable for use in large space.Fuel line hose clamp pliers designed to compress the quick disconnect lugs without damaging connector.Suitable for VW, Audi, Fiat, GM,Vauxhall,Mercedes and other makes and models....
Check Stock

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

  • ...n fittings feature a reusable spin-lock connector.
  • Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
  • Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
  • Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
  • No Worry To Buy: Excellently Sealed, no leaking. We offer 3-month after-sale service for the 6an 3/8 fuel hose fittings kit. Any problem you have, contact us directly by amazon message. Please Noted: Professional installation and Adjustable AN ....
Check Stock

MuHize Transmission Cooling Hose - Upgraded 70 Inch SS Braided Transmission Cooler Line, Heavy Duty Transmission Cooler Hose Fitting 6AN Compatible with GM Chevy Ford Turbo 700R4 4L60E 4L65E 4L80E

  • PACKAGE INCLUDE - 2 x 70 inch 3/8 I.D. Stainless Steel Braided Hoses.
  • 2 x AN-6 flared to 1/4 In NPT billet adaptors.
  • 4 x AN-6 flared to 3/8 In NPT billet adaptors.
  • 4 x 90-degree AN-6 inverted flare to AN-6 flare billet adaptors.
  • COMPATIBILITY - MuHize 70 inch transmission cooler hose fits for GM Chevy 1996-2021 4L80E, for Ford C4-C6-AOD, for Turbo 350/400/200-200R4/700R4 4L60 4L60E 4L65E..
  • DURABILITY - This transmission cooling line kit is made of high-strength PTFE(Teflon), which is resistant to high & low temperatures and is anti-corrosion. The precision braided stainless steel on the outside of the hose greatly increases the strength of the tube..
  • ANTI-LEAKAGE - The interface is covered with black rubber, which can effectively prevent leakage and ensure the normal operation of the hose..
  • DIFFERENT FITTINGS - Different sizes of fittings are for different cars and turbos. Please check as much as possible to make sure the transmission cooling hose is the one that you need..
Check Stock

Mophorn 8AN Fuel Line, 20 Pcs 8AN Fuel Hose Kit, 32.8Ft BK Nylon Stainless Steel Braided Oil Line Hose, NBR CPE Synthetic Rubber AN8 Gas Line, 8AN Universal Fitting Adapter Set with Aluminum Hose End

  • ...e End Kit: Each nylon and stainless steel braided oil fuel line kit included 20pcs 8an hose ends (8pcs straight, 4pcs 45 degrees, 4pcs 90 degrees, 4pcs 180 degrees) and 32.8ft braided fuel line. Fitting professionally to manifest its best performance..
  • Suit for Various Uses: Fuel line widely used in the fuel system, transmission system, cooler system, and pump. It can be worked with racing fuel, pump gas, fuels with ethanol, alcohol-based fuels, motor oil & coolant, etc..
Check Stock