Top Transmission Cooler Line Hose

3/8 Transmission Cooler Hose - 6AN High Pressure Fuel Line Braided Hose For Marine, Car, Engine System, Alcohol, Nitro, Fuel Transmission, Clutch, Power Steering, Oil and Hydraulic (10 FT)

  • PREMIUM MATERIAL◀The 3/8 transmission cooler hose is made with high-quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber, thus preventing it from rusting and corrosion. It has a wall thickness of 35mm..
  • BETTER TRANSIMMISION◀A perfect fuel line for vehicles with engines that need a large tube diameter. Its 3/8 inch diameter helps in better flow and intake of fuel. This 3/8 braided hose ensures that the car engine is able to process the fuel in the best possible state. The 3/8 fuel line comes as a roll of 10 feet long enough for a wide range of applications..
  • QUALITY TESTED ◀The tube is double annealed and 304 grade making it easy for bending and flaring. You can cut the tubing according to actual needs to better meet your needs.Oil resistant, cold-resistant, and ethanol tolerance..
  • BENDABLE ◀The 3/8 transmission hose enable you to make sharp bends without kinking. It is easy to work with, and you can even bend it with the palm of your hand. You, however, need to bend it slowly and back and forth for perfect curves..
  • WIDE APPLICATION ◀ The 6an fuel line i....
Check Stock

YOTOO Master Quick Disconnect Tool Kit 22pcs for Fuel Line Automotive Air Conditioner and Transmission Oil Cooler Line

  • WIDELY USE: This fuel line disconnect tool set for disconnecting fuel lined, automotive ac hose, air conditioning lines, radiator and heater hoses..
  • DIFFERENT DISCONNECTORS: 6pcs transmission oil cooler line remover.4pcs quick AC fuel line remover. 7pcs fuel line remover for disconnecting 1/4.
Check Stock

MOTOCOCHE 40,000 GVW Low Pressure Drop Transmission Oil Cooler Kit with Mounting Hardware, Towing Hitch Engine Oil Coolers & Kits Advanced Cooling Protection Replaces LPD47391 47391 OC-4739-1

  • Main Function -- As an auxiliary component, the transmission oil cooler can keep the temperature of the hydraulic oil in the gearbox low and extend the service life of the transmission and engine..
  • Wide Application - Suitable for car, vans, light trucks, R.V. and towing applications, applications up to 40,000lbs gross vehicle weight. It will work on any vehicle as long as you have room to have air flow through the transmission oil cooler. Replace OEM part number LPD47391 47391 OC-4739-1..
  • Brazed Aluminum Structure -- Adopt durable brazed aluminum structure to provide advanced cooling protection, strong heat transfer and higher cooling performance..
  • What You Will Get -- Low pressure drop transmission oil cooler kit includes transmission Oil Cooler, cooler hose, hose clamps, bolts, nuts, washers, steel mounting straps and brass fittingsd, etc..
  • Quality Service -- We wholeheartedly provide you with the best service, 1 years warranty and 7*24 hours online answering your questions about the product, you are welcome to contact us at any time..
Check Stock

Derale 13950 Atomic-Cool Remote Cooler , Black

  • Universal:universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
  • Installation location:choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
  • Function:keep oil temperature low, help to improve the lubricating effect of engine oil, prevent parts damage ,or even seizure of the engine.Usable to cool down engine oil,transmission, and rear-differentials.Besides,this stacked-plate oil cooler design smaller and lightweight suitable for narrow space..
  • Size:10AN 30Row oil cooler,oil capacity:0.74L.Test pressure: 116psi,burst pressure:232psi.Material:aluminium alloy..
  • Package Include:1pc 30row engine oil cooler.2pcs 10an female to 8an male fittings,2pcs 10an female to 6an male fittings.Can be used to connect 8AN / 6AN braided fuel line hose ends..
Check Stock

5/16 Fuel Hose 8mm Transmission Oil Cooler Hose High Pressure Fuel Injection Hose For Conveying Gasoline, E-85, E10, Diesel, Oil, Coolant, and Bio-Diesel Fuels In Cars, Trucks, Buses, Etc

  • ... BETTER TRANSIMMISION◀A perfect fuel line for vehicles with engines that need a large tube diameter. Its 5/16 inch diameter helps in better flow and intake of fuel. This 5/16 fuel line hose ensures that the car engine is able to process the fuel in the best possible state. The 5/16 transmission cooler hose comes as a roll of 10 feet long enough for a wide range of applications..
  • QUALITY TESTED ◀The tube is double annealed making it easy for bending and flaring. You can cut the tubing according to actual needs to better meet your needs. Oil resistant, temperature-resistant, and ethanol tolerance. Hold up to -68°F to +212°F, a lot stronger to heat and extreme circumstances..
  • BENDABLE ◀The 5/16 fuel line enables you to make sharp bends without kinking, minimum bend radius up to 4.7inch(120mm). The 8mm fuel injection hose is easy to work with, and you can even bend it with the palm of your hand. You, however, need to bend it slowly and back and forth for perfect curves..
  • WIDE APPLICATION ◀ The 8mm fuel hose is specially designed to meet SAE 30R9 standard and can be compatible with any f....
Check Stock

6AN Transmission Cooler Hose Kit Lines Fitting Kit for GM Chevy 1996-2021 4L80E, for Ford C4-C6-AOD, for Turbo 350/400/200-200R4/700R4 4L60 4L60E 4L65E,Stainless Steel Braided Lines

  • Replace Number - Transmission cooler hose fitting replace number is TH350 700R4 TH400..
  • Package Include -about 70 inch & 3/8" I.D. Stainless Steel Braided Hoses.
  • / AN-6 flared to 1/4" NPT billet adaptors.
  • /AN-6 flared to 3/8" NPT billet adaptors.
  • /90 degree AN-6 inverted flare to AN-6 flare billet adaptors.
  • SS Braided Transmission Cooler Hose Line.
  • 1 year warranty for it.If you have any problem ,please contact us and we will respond you on 24 hours.
Check Stock

NEXADD Fuel Line Pliers Set 4Pcs | Hose Remover Pliers | 9 Inch Fuel Filter Caliper | Hose Pipe Clamp Clip | 80 Degree Disconnect Pliers Set for Auto Maintenance with Storage Case

  • ...d 80 degree disconnect pliers . You’ll save about 30 percent when you buy NexADD fuel line pliers combo kits instead of buying each tool . Just Add to Cart!.
  • Hose Remover Pliers★-The best tool for removing hose clamps for fuel and small water hoses.To remove hoses from transmission,rubber hoses connect to cooler lines. Even if can't fit both sides (hose/tube)between fitting and hose.Slide one side in and work hose out then get both sides in, give handles a squeeze and Voila" off comes hose.Hose remover pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners,etc.Remove fuel vacuum or heater hoses from 5/32”to 1/2”(4mm to 14mm)..
  • Fuel Line Clip Removal Pliers ★-The fuel line clip removal pliers suitable for removal and replacement of connections on fuel filter lines (petrol & diesel).Required when removing and replacing fuel filters.Upgarded maximum opening approx: 9.3CM/3.66IN.NexADD fuel line clip removal tool suitable for use in large space.Fuel line hose clamp pliers designed to compress the quick disconnect lugs without damaging connector.Suitable for VW, Audi, Fiat, GM,Vauxhall,Mercedes and other makes and models....
Check Stock

10FT 6 AN 3/8\ Nylon Stainless Steel Braided PTFE E85 Tube Fuel Line Fittings Kit with 6PCS Swivel Fuel Hose Fitting Adapters

  • 【High Quality】This hose features an PTFE inner layer which is compatible with E85, wrapped by a single layer of stainless steel and nylon. These lines do not deteriorate or swell over time due to E85 use like non-PTFE fuel line. PTFE fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided fuel line..
  • 【Application】The fuel line is widely used in fuel system, transmission system and cooler system and can be compatible with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel, and etc..
  • 【Package Includes】The 6an nylon and stainless steel braided PTFE fuel line kit includes: 6pcs 6an PTFE hose ends (2pcs straight, 2pcs 45 degree, 2pcs 90 degree) and 3/8 PTFE braided fuel line (Length:10ft/3M)..
  • 【Work Condition】The 6an PTFE hose working temperature range: -76℉ to 446℉ (-60℃ to 230℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 3000 psi. Bursting Pressure (psi): 10000psi..
  • 【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

New All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015

  • ➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
  • ➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
  • ➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
  • ➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
  • middle layer: 304 stainless steel wire mesh sleeve.
  • outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
  • ➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..
Check Stock

MuHize Transmission Cooling Hose - Upgraded 70 Inch SS Braided Transmission Cooler Line, Heavy Duty Transmission Cooler Hose Fitting 6AN Compatible with GM Chevy Ford Turbo 700R4 4L60E 4L65E 4L80E

  • PACKAGE INCLUDE - 2 x 70 inch 3/8 I.D. Stainless Steel Braided Hoses.
  • 2 x AN-6 flared to 1/4 In NPT billet adaptors.
  • 4 x AN-6 flared to 3/8 In NPT billet adaptors.
  • 4 x 90-degree AN-6 inverted flare to AN-6 flare billet adaptors.
  • COMPATIBILITY - MuHize 70 inch transmission cooler hose fits for GM Chevy 1996-2021 4L80E, for Ford C4-C6-AOD, for Turbo 350/400/200-200R4/700R4 4L60 4L60E 4L65E..
  • DURABILITY - This transmission cooling line kit is made of high-strength PTFE(Teflon), which is resistant to high & low temperatures and is anti-corrosion. The precision braided stainless steel on the outside of the hose greatly increases the strength of the tube..
  • ANTI-LEAKAGE - The interface is covered with black rubber, which can effectively prevent leakage and ensure the normal operation of the hose..
  • DIFFERENT FITTINGS - Different sizes of fittings are for different cars and turbos. Please check as much as possible to make sure the transmission cooling hose is the one that you need..
Check Stock

Transmission Cooler Hose Fitting Fit for Chevy Ford Mopar GM GMC Buick Cadillac Cars and Trucks Stainless Steel Braided Lines Replace TH350/ 700R4/ TH400 -52 Inch

  • Fitment - Transmission cooler hose fitting fit for Chevy Ford Mopar GM GMC Buick Cadillac Cars and Trucks..
  • Product Size- This stainless steel flexible braided transmission hoses, each 3/8" inner diameter hose is approximately 52" in length, and comes with....
  • Replace Number - Transmission cooler hose fitting replace number is TH350 700R4 TH400..
  • Compatible with -The universal kit is perfect for your Rat Rod, Hot Rod, Street Rod, Muscle Car, Custom and more.
  • Package Include - AN-6 flared to 1/4" NPT billet adaptors, fits most 700R4, TH350, TH400.
  • Please check fitting size prior to ordering (Some are 1/4"....
Check Stock

Performance Tool W89330 Fuel And Transmission Line Disconnect Set, 7-Piece

  • Color coded anodized aluminum fuel line disconnect tools.
  • Transmission cooler line disconnect tool.
  • Ford and Mercury transmission cooler line disconnect tool.
  • Ford, Chrysler and GM quick disconnect tool.
  • Ford, Chrysler and GM quick disconnect tool..
Check Stock