Top Transmission Cooler With Male Fittings

Derale 13401 Series 10000 Stacked Plate Transmission Oil Cooler 10 Row Black

  • Built in turbulators agitate fluid for maximum heat transfer.
  • Sturdy furnace brazed all aluminum construction tested to 250 p.s.i..
  • Male -6AN aluminum O-ring inlet fittings and 3/8 inch hose barb adapters included.
Check Stock

Hayden Automotive 689 Rapid-Cool Plate and Fin Transmission Cooler

  • Size is 3/4 inch x 11-5/8 inch x 11 inch extra heavy duty.
  • Class "A" motor homes, large travel trailers, 5th wheel trailers.
  • GVWR up to 30,000 pounds, towing up to 10,000 pounds.
  • Equipped with 6 male flare fittings allowing cooler to be hard plumed into system.
  • Pre-drilled mounting brackets for easy installation.
Check Stock

Dorman 904-407 Engine Oil Cooler Mount Compatible with Select Ford / International Models

  • Size is 3/4 inch x 7-1/2 inch x 11 inch medium duty.
  • GVWR up to 20,000 pounds, towing up to 2,500 pounds.
  • Equipped with 6 male flare fittings allowing cooler to be hard plumed into system.
  • Pre-drilled mounting brackets for easy installation.
Check Stock

Mishimoto MMRAD-GMT-99 Performance Aluminum Radiator Compatible With Chevrolet Silverado 1999-2014

  • Direct fit for 1999–2014 Chevrolet Silverado / GMC Sierra 1500 V8.
  • 72% increase in coolant capacity over stock.
  • 69% increase in surface area over stock & 92% thicker than stock radiator.
  • 46°F reduction in coolant outlet temperatures over stock.
  • Includes both transmission and oil cooler ports with pre-installed fittings as well as the Mishimoto Lifetime Warranty.
Check Stock

Transmission Oil Cooler LPD47391 Low Pressure Drop Trans Cooler 40000 GVW OC-4739-1 LPD-4739-1 with Mounting Hardware (Silver)

  • Fitment:LPD47391 Advanced Cooling Protection for Car, Van, Light Truck, R.V. and Towing Applications.Suitable for applications up to 40,000lbs Gross Vehicle Weight.
  • High-Quality: Precise fin Spacing.Reliable, Durable Brazed Aluminum Construction..
  • Function:Self-regulating flow for maximum lube flow protection through cold start-up, varied temperatures and driving conditions, heavy loads and towing.
  • Package included: Transmission Oil Cooler,Bolts, nuts, washers, mounting straps, Brass fittings, high-quality cooler hose,hose clamps(No installation instructions).
  • NOTE: This kit is NOT intended for operation below 32 degrees Fahrenheit.
Check Stock

Air Compressor Fittings, Air Compressor Hose Kit, 15pcs Air Line Fittings and 1/4 inch NPT Quick Connects

  • Complete Set Of Air Compressor Fittings Features 2 Knurled Quick Connector - Couplers, 3 Male and 3 Female Plugs, 5 Male to Male Connectors, & Two Rolls of Teflon Tape..
  • The LE LEMATEC Air Compressor Quick Connect Fittings Feature a Quick Connect System While Reducing the risk of accidental disconnects..
  • 1/4 in Air Compressor Fittings Feature Heavy Duty Solid Brass Construction Preventing Air Leaks and Costly Replacements..
  • Rust and Corrosion resistant fittings for air compressors which are extremely durable and long lasting making them an excellent choice for anyone with an air compressor..
  • Milton M-style also know as type D or I/M Air Compressor Fittings complete with a convenient storage case. Proudly American Owned and Operated Company..
Check Stock

6AN Transmission Cooler Hose Kit Lines Fitting Kit for GM Chevy 1996-2021 4L80E, for Ford C4-C6-AOD, for Turbo 350/400/200-200R4/700R4 4L60 4L60E 4L65E,Stainless Steel Braided Lines

  • Replace Number - Transmission cooler hose fitting replace number is TH350 700R4 TH400..
  • Package Include -about 70 inch & 3/8" I.D. Stainless Steel Braided Hoses.
  • / AN-6 flared to 1/4" NPT billet adaptors.
  • /AN-6 flared to 3/8" NPT billet adaptors.
  • /90 degree AN-6 inverted flare to AN-6 flare billet adaptors.
  • SS Braided Transmission Cooler Hose Line.
  • 1 year warranty for it.If you have any problem ,please contact us and we will respond you on 24 hours.
Check Stock

Dorman 624-548 Transmission Oil Cooler Line for Select Subaru Models

  • Upgraded replacement – this transmission oil cooler line is made of stainless steel for increased durability.
  • Application specific – made to match the fit the function of the original line on certain Subaru Forester and Impreza model years.
  • Complete repair – comes with fittings and brackets attached for installation.
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience.
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage.
Check Stock

Fuel Line Pliers Tweezer Set DEF Exhaust Fluid Lines Disconnect Removal Tools

  • FUNCTIONS: The Oil Cooler Line Quick Disconnect Kit provides 7 different sizes tool to remove/disconnect fittings on fuel lines, heater lines, AC cooling lines and other quick disconnect couplings..
  • FIT FOR VEHICLES: The AC Fuel line disconnect tools are compatible with most Ford, GM, Chrysler and Mazda models. It also fits for some other vehicles while the automatic transmission line is within the sizes..
  • EASY TO USE: The compact size is easy to grasp and the angled design allows to access the hard-to-reach areas. Place the notch against the fuel line to release the lock and remove it..
  • WHAT YOU GET: The Transmission Line Removal Tool set contains 7 kinds of opening size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch..
  • DURABILITY: All fuel line quick disconnect heater hose disconnect tools are made of hard plastic to secure the strength and sturdiness..
Check Stock

POHIR Pressure Washer Adapter Set, 14-Pack Quick Connect Fittings, 3/8 Power Washer Quick Disconnect Kit with M22 Swivel to 3/8'' Quick Connect, 3/4\ to Quick Release and M22 15mm to 14mm Male

  • 14-Pack Quick Connect Kit - 4-pieces Metric M22-14 female to 3/8 quick plug, 2-pieces m22 14mm female to 3/8 quick disconnect, 2-pieces M22 14mm male to 3/8’’ quick disconnect, 2-pieces M22 14mm male thread to m22 14/15 male, 2-pieces 3/4 female to 1/2 quick connect, 2-pieces 1/2 plug to 3/4 male.
  • Easy Connect & Disconnect - M22 quick connect fittings help pressure washer hose quick connect to pressure washer pump or gun. The 3/4 quick coupler fits all 3/4" GHT (garden hose thread) watering equipment..
  • M22 Male to Male - 1x M22 15mm male to 14mm male and 1x M22 14mm to 14mm male adapter, convert the metric M22 14mm male thread to the M22 14mm or 15mm swirl as needed..
  • High-Quality Brass Quick Connect - Made of solid brass, stainless steel and engineering plastics, for a safe and leak free connection. These quick connect fittings are durable, rust proof, providing secure fittings and are convenient for frequent connection. .
  • Warm Tips: Inner diameter of M22 -14 swivel is 14MM NOT 15mm. Do NOT use the threaded 14MM to connect M22-15mm fittings, or it will cause leakage. Please lubricate the accessories before use..
Check Stock

Dorman 624-551 Transmission Oil Cooler Line for Select Ford / Lincoln Models

  • Reliable replacement – this automatic transmission oil cooler hose is precision-engineered to replace the stock hose assembly on specific vehicles.
  • Quality construction – manufactured from metal and rubber with OE-style fittings to provide a reliable replacement.
  • Excellent value – OE quality at a lower price.
  • Vehicle tested – has undergone on-vehicle testing to ensure quality, proper fit and performance.
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Garage.
Check Stock

Kinchoix 24" Flexible Yellow Coated Gas Hose Connector Kit for Stove Dryer Furnace Gas Water Heater Flexible Gas Line with Connector 3/4" FIP & 3/4"MIP Fitting

  • ...ng tape. Factory leak tested 100% pass!.
  • 「COMPATIBLE WITH」- A stainless steel gas line hose mainly use for connecting gas stove, gas dryer, furnace, gas water heater. Gas pipe outside dimension of 1'', inner diameter 3/4''. Thicker pipe diameter can transmission gas quickly..
  • 「STURDY MATERIAL」- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, comes with a 3/4" male brass fittings on both end, standard male and female pipe threads for easy connection..
  • 「EASY TO INSTALL」- Easy to install the hose connector kit for your gas dryer. Only one wrench and a little bit teflon tape are all you need to install the hose..
  • 「CAUTION」- The connectors and fittings are designed for use only on the original installation and not to be reused for another gas appliance or at another location. Test for leaks only with leak test solution. Rinse with clean water after leak testing..
Check Stock