Top Transmission Fluid Cooler Hoses

GSTP 6AN SS Transmission Cooler Hose Fitting Stainless Steel Braided Cooling Lines Compatible with Chevy Ford Mopar Replacement for TH350/ 700R4/ TH400 50"

  • Application: Our braided transmission cooler hoses compatible with Chevy Ford Mopar Buick Cadillac Cars and Trucks.
  • Fitment: The Transmission Cooler Hose Fitting compatible with Rat Rod, Hot Rod, Street Rod, Muscle Car, Custom and more.
  • Works with lots of Chevy, Ford, Mopar, Buick, Cadillac cars and trucks.Replacement for most 700R4, TH350, TH400..
  • Well-made: Made of high-quality stainless steel, not easily deformed, can be used for a long time..
  • Size: About 52 inch & 3/8" stainless steel braided hoses, the inner diameter of each hose is 3/8", length is approximately 52", and comes with an AN-6 inverted torch end..
  • Warranty: Sales is just the beginning of service. If you have any problems, contacting us and we will serve you within 24 hours..
Check Stock

20FT 6AN 3/8\ Nylon Stainless Steel Braided CPE Oil Gas CPE Fuel Line Hose,black

  • ▶Nylon and stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, swap fuel line..
  • ▶Black Braided Steel Fuel Hose Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Working Temperature Range: -40℉ to 150℉. Please make sure the pressure and temperature range is suitable for your application before purchase..
  • ▶Length: 20 Feet. Inner Diameter: 5/16" (8.71mm). Outside Diameter: 0.56inch (14.22mm). Please measure before purchase!.
  • ▶Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • ▶Professional installation is highly recommended. The AN6 nylon braided fuel hose is designed for use with 6AN swivel style hose end fitting. All of our products are subject to strict quality control. If there are quality problems or you are not satisfied with the products, please contact us. We offer you the best solution..
Check Stock

3Ft 6AN 3/8" Fuel Line Hose Braided Stainless Steel W/2pcs AN6 Hose Fitting Kit Blue & Red Universal for Racing Fuel, Gas, Coolant etc

  • Stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas ,vacuum, hydraulic fluid, lube, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line..
  • Braided Steel Fuel Line Maximum Working Pressure (psi): 1000 psi. Bursting Pressure(psi): 6000psi. Working Temperature Range: -40℉ to 257℉(-40℃ to 125℃). Please make sure the pressure and temperature range is suitable for your application before purchase..
  • Include a universal 3Ft fuel hose and 2pcs swivel hose ends.
  • Inner Diameter: AN-6 (3/8") - Outer Diameter: AN-9 (9/16").
  • Double stainless steel braid cover for excellent flexibility and resistance to abrasion. This hose is perfect for extreme environments where there is extra heat or where chaffing might occur..
  • Professional installation is highly recommended. Warranty: CarBole offers 3-month warranty for the steel braided hose..
Check Stock

Raybestos H1108 Professional Grade Drum Brake Shoe Spring Hold Down Pin, (Pack of 25)

  • Inexpensive, high-quality replacement for leaking transmission oil pan.
  • Steel construction and powder-coated finish ensures added corrosion resistance and a longer service.
  • Critical to car function by storing transmission fluid to keep transmission running cooler.
Check Stock

Transmission Cooler Hose Fitting Fit for Chevy Ford Mopar GM GMC Buick Cadillac Cars and Trucks Stainless Steel Braided Lines Replace TH350/ 700R4/ TH400 -52 Inch

  • Fitment - Transmission cooler hose fitting fit for Chevy Ford Mopar GM GMC Buick Cadillac Cars and Trucks..
  • Product Size- This stainless steel flexible braided transmission hoses, each 3/8" inner diameter hose is approximately 52" in length, and comes with....
  • Replace Number - Transmission cooler hose fitting replace number is TH350 700R4 TH400..
  • Compatible with -The universal kit is perfect for your Rat Rod, Hot Rod, Street Rod, Muscle Car, Custom and more.
  • Package Include - AN-6 flared to 1/4" NPT billet adaptors, fits most 700R4, TH350, TH400.
  • Please check fitting size prior to ordering (Some are 1/4"....
Check Stock

EONLION Oil Change Vacuum Fluid Extractor 6.5L Pneumatic/Manual Oil Extractor Pump for Automobile Oil Transmission Coolant Change Tool Easy-to-Use Hand Pump Extract Fluid Through Dipstick Tubes

  • 【 Speedy Extraction 】 Fast suction and extraction speed of 1.8L /min. The oil changer extracts engine oil in a 4 cylinder car within minutes at....
  • 【 2 Options Usage 】 Fluid evacuator equips with pneumatic and manual mode to fit any condition. The pneumatic mode turns the pump into a....
  • 【No Oil LEFT】Vacuum Fluid Extractor comes with 4 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be....
  • 【 Plus Version 】 Upgraded accessories, upgraded convenience. This fluid extractor comes with storage unit for collecting hoses when not in use,....
  • 【 Work Freely 】 Not limited to places, change oil anytime and anywhere! Perfectly extracts most fluid types: engine oil, transmission fluid, gear....
Check Stock

Performance Tool W83145 Fuel Line Disconnect Tool Tool

  • Prevent fluid leaks when replacing or working on components that use fluid transfer lines..
  • Use to seal transmission cooler, brake, A/C, and fuel lines found on most vehicles..
  • The spring loaded design quickly and easily stops the flow of liquids on cars, trucks and other machinery..
  • Includes four stoppers to fit the following size lines 3/8 in., 5/16 in., 1/2 in., and the banjo style fitting..
Check Stock

Mishimoto MMTC-K2-14 Transmission Cooler Compatible With Chevrolet Silverado 2014-2018 Silver

  • Fits all 2014-2018 Chevrolet Silverado and GMC Sierra 1500 V8.
  • Stacked-plate construction for maximum durability and superior cooling.
  • Adds an extra 0.65 quarts of transmission fluid and over 3,000 square-inches of cooling surface area.
  • Included thermal bypass valve delete allows fluid flow to the cooler at all times for vehicles in hot climates.
Check Stock

Oil Transfer Pump Extractor, Electric Oil Pump Fast Oil Change Transmission Fluid Extractor Pump, 12v 60w Diesel Fluid Scavenge Suction Pump for Changing Oil, Boat, Tubes, Truck, RV, ATV, Riding Mower

  • ... MAKES LIFE EASIER - Pumps oil out throw dip stick, no need to lay under your car. Warmed up the engine of each and used this to extract the old oil an then replaced it with new. The fluid oil change pump extractor saves you a lot of time and effort. No need to get under vehicle to drain the transmission fluid..
Check Stock

JoyFans 10L Pneumatic Transmission Fluid Pump Extractor and Dispenser, Gearbox Oil Transfer System Refill Fill Evacuator Tool Kit with 15PCS ATF Adapters for Most Garage Shop Vehicles

  • ..., engine oil, gearbox oil, lubricating oil, brake fluid, coolant, etc. If it's used for ATF oil, 15 optional ATF adapters are well kept in a blow-molded case at your fingertips. All parts in this fluid evacuator and dispenser tool set are designed to transfer fluids fast and safely..
  • Handsfree Pneumatic Helper: This transmission fluid pump will keep you away from boring laborious manual work with air compressors. Two-way extractor & dispenser tool saves energy and time.
  • Don't even need to pour oil manually! You only need to switch the extract or dispense mode and buckle the self-locking device. Large capacity avoids the trouble of repeated refueling and satisfys refueling needs of multiple vehicles at once. Quick and sparkless..
  • 3PCS 1M Hoses: O.D. 6mm 8mm 10mm. Connect both ends of the 80'' hose with quick coupling to pump and the selected nylon hose first. They make the pump more suitable for various makes and models. The blue knob must be consistent with the air control switch valve: Extract or Dispense. The 1M nylon hose can be inserted into the car oil container or dipstick hole directly to extract waste oil for recycle and dispense the new oil for refilling. No need to jack up the vehicle and crawl under it.
Check Stock

OEMTOOLS 24441 Manual ATF Refill System, 8 Adapter Transmission Fluid Pump, Manual Fluid Transfer Pump Automotive, ATF Pump w/Shut-Off Valve

  • MANUAL TRANSMISSION FILL PUMP: The manual transmission fluid transfer pump allows the operator to fill or top off transmissions with up to 3 liters (3.1 quarts) of fluid between refills.
  • Multiple adapters to fit all of your transmission’s needs.
  • PRESSURIZED FILLER SYSTEM: Pressurized operation frees users from continual pumping.
  • Transmission flushing system works at a maximum pressure of 20 PSI.
  • The gauge registers a maximum pressure of 30 PSI.
  • Release excess pressure with the release valve.
  • FITS MANY VEHICLES: This transmission fluid pump automotive tool includes adapters for use with many Ford, BMW, Honda, Nissan, VW, Porsche, Mini Cooper, Audi, and Mercedes-Benz transmissions.
  • Included adapters cover the most common transmission systems.
  • CONVENIENT FEATURES: ATF transmission fluid filler comes with a belt attachment for storing each ATF flush adapter on the oil dispenser tank.
  • Transmission fluid flush kit hose features a swivel connector and a fluid dispensing shut-off valve.
  • MULTI-PURPOSE TRANSMISSION FILL KIT: This transmission pump can be used for pressurized fills like engine coolant, motor oil, brake or power steering fluid.
  • Transmission fluid pump transfer system is a money saver for the DIY mechanic’s tool kit.
Check Stock

ABN Manual ATF Filler System – 3L Manual Transmission Fluid Pump Tool for Automatic Transmission with System Adapters

  • SAVE MONEY ON TRANSMISSION SERVICE WORK: Checking and changing your transmission fluid keeps your automatic transmission lubricated and running smoothly and it helps to avoid wear on your clutches.
  • But going to a mechanic can cost up to a few hundred for a transmission fluid change.
  • Skip the hassle by changing the transmission fluid yourself with the ABN 3L Manual ATF Fluid Pump Automotive Fluid Transfer Pump Fluid Dispensing System.
  • BUILT TO LAST: Large 3-liter (101.4 oz) fluid container is made of thick plastic for durability and longevity and features 4 supports on its base to enhance stability while you work.
  • Pressure gauge can register up to 30 PSI and faces upwards for easy visibility.
  • 5.3 foot (1.6m) fluid dispensing hose features swivel thread connector to link to filler unit and a metal dispenser with a shut off valve.
  • Metal dispensing nozzle uses an easy-release locking mechanism to hold adapters in place securely.
  • CONVENIENT STORAGE SYSTEM: With so many little parts it might be easy to lose pieces, but the 21-inch hook and loop adapter belt and 14-inch (35.5 cm) extension band easily fit around the fluid transfer pump automotive filler system for easy organization when working or in storage.
  • 11 elastic slots hold the included transmission fl....
Check Stock