Top Transmission Line Fittings

Dorman 624-548 Transmission Oil Cooler Line for Select Subaru Models

  • Upgraded replacement – this transmission oil cooler line is made of stainless steel for increased durability.
  • Application specific – made to match the fit the function of the original line on certain Subaru Forester and Impreza model years.
  • Complete repair – comes with fittings and brackets attached for installation.
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience.
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage.
Check Stock

FEL-PRO ES 70599 Fuel Injector O-ring Set

  • Durable Material: Made of heavy plastic, durable, resistant to fuel and solvents, light weight, small size, easy to grip, spring-loaded design, long life..
  • Function: The Oil Cooler Line Quick Disconnect Kit provides 7 different sized tools for removing/disconnecting the fuel line, heater line, AC cooling line and other accessories on the quick disconnect fittings..
  • SIMPLE HANDLING: Compact size for easy grip and access to hard-to-reach lines. Hold the notch of the tool against the wire and open the clamp with a push. Then you can plug the line into the tool and disconnect it. (Please check the outer diameter of the fuel/oil/air conditioning piping before use.).
  • What You Get: Transmission Line Removal Tool Set Contains 7 Opening Sizes: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"..
  • Wide applicability: 7 sizes of disconnect tools for a variety of fuel lines and other quick disconnects. If you have any questions about this product, please keep in touch with us in time..
Check Stock

NEW GM T-56 HYDRAULIC THROWOUT BEARING,97-04 CORVETTE,98-02 CAMARO,LS1,LS6,LS7

  • Brand New Ram Hydraulic Throwout Bearing Kit for Stock Style Clutches with GM Tremec T-56 Transmissions (Ram Part #78165)..
  • Fits GM Tremec T-56 transmissions in: * 1997-2004 Chevy Corvette with LS1, LS6, and LS7 engines. * 1998-2002 Chevy Camaro with LS1 engines. * 1998-2002 Pontiac Firebird with LS1 engines..
  • Fits stock style clutches. * Includes a replacement transmission collar to install on your T-56..
  • Includes a remote bleeder line, as well as a supply line. The factory supply line is cut and the adapter fitting (included) is installed with the new supply line..
  • Also, includes a set of conical shims to properly fit the bearing, installation stud, inlet, outlet, and conversion fittings, as well as installation instructions..
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in half..
Check Stock

Derale 13950 Atomic-Cool Remote Cooler , Black

  • Universal:universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
  • Installation location:choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
  • Function:keep oil temperature low, help to improve the lubricating effect of engine oil, prevent parts damage ,or even seizure of the engine.Usable to cool down engine oil,transmission, and rear-differentials.Besides,this stacked-plate oil cooler design smaller and lightweight suitable for narrow space..
  • Size:10AN 30Row oil cooler,oil capacity:0.74L.Test pressure: 116psi,burst pressure:232psi.Material:aluminium alloy..
  • Package Include:1pc 30row engine oil cooler.2pcs 10an female to 8an male fittings,2pcs 10an female to 6an male fittings.Can be used to connect 8AN / 6AN braided fuel line hose ends..
Check Stock

ASD 3/16 and 1/4 Brakeline fittings kit nuts unions compression fittings 70 Pieces

  • Auto Supplies Direct (70) Piece 3/16″ & 1/4″ Brake Line Fittings Kit (3/16″ and 1/4″ Tube Nuts, Unions, and Compression Fittings) for Cars and Trucks.
  • Contains a (30) Piece 3/16″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 3/16″ Short Tube Nuts, (10) 3/16″ Long Tube Nuts, and (10) 3/16″ Unions.
  • Contains a (30) Piece 1/4″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 1/4″ Short Tube Nuts, (10) 1/4″ Long Tube Nuts, and (10) 1/4″ Unions.
  • Contains (5) 3/16″ OD Compression Brake Line Fittings.
  • Contains (5) 1/4″ OD Compression Brake Line Fittings.
Check Stock

NEW CURRIE 70-87 CHEVY C-10 GMC C-15 C1500 TRUCK 2WD 5-LUG REAR END WITH WILWOOD DISC BRAKES, 11\ DRILLED ROTORS, RED CALIPERS, LINES, PARKING BRAKES, AXLES BEARINGS C10 C15, 1982 1983 1984 1985 1986

  • ...ton Dynapro Calipers - Red 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Smart Compound Brake Pads 003e All Hardware To Install.
  • Parking Brake Cable Kit: 003e Connects to the Wilwood Parking Brake Assemblies, then comes together to join the stock cable behind the transmission | Flexline Kit: 003e Steel braided brake lines, caliper fittings, and chassis fittings to connect the calipers to the hard lines 003e Also includes weld-on line tabs | Hard Line Kit: 003e Steel hard brake line tubing to connect the chassis fittings to the included rubber hose 003e Rubber hose connects those hard lines to the line on the frame.
Check Stock

25 Ft. 3/16 OD Copper Nickel Brake Line Tubing Coil and Fitting Kit, 25 Ft of 3/16' x 25'

  • Complete Brake Line Tubing Kit- Includes 1 Pcs 25 Feet 3/16" Copper Nickel Brake Line(0.028" Wall Thickness) & 16 Fittings(10 x 3/16” (3/8-24) Inverted Tube Nuts, 2 x 3/16” (7/16-24) Inverted Tube Nuts, 2 x 3/16” (1/2-20) Inverted Tube Nuts, 2 x 3/16” (9/16-18) Inverted Tube Nuts).
  • High Quality- This brake line coil is made from Copper-Nickel alloy. It is malleable, easy to bend and not easy to break. Designed by 0.028" wall thickness and anti-rust, more flexible and durable for use..
  • Widespread Application- 3/16 brake line tubing kit for use in fuel and transmission systems. It is also widely suitable for household, industrial and commercial uses..
  • Rust and Corrosion Proof- Our copper-nickel fuel tube line last longer than standard steel tubing. It won't rust, corrosion resistance..
  • Warranty- Our brake line meets all SAE and ISO specifications. For any reason you're not completely satisfied, please feel free to contact us and ask for a replacement or refund..
Check Stock

Lisle 37140 Disconnect Pliers, 45 Degree

  • The Low Profile Design with 45° Bend Disconnects Fuel Line, EVAP Line Fittings and DEF Fittings in Hard-to-Reach Areas.
  • Low-profile design with 45° bend allows the tool to fit between the top of the fuel tank and vehicle.
Check Stock

NEW RAM HYDRAULIC THROWOUT BEARING FOR CHRYSLER TREMEC TRANSMISSIONS & STOCK

  • Brand New Ram Hydraulic Throwout Bearing Kit for Stock Style Clutches with Chrysler Tremec Transmissions (Ram Part #78134)..
  • Works with Chrysler Tremec Transmissions with a 1"-23 spline..
  • Includes a replacement transmission collar to install on your Tremec..
  • Also, includes a set of conical shims to properly fit the bearing, installation stud, inlet, outlet, and conversion fittings, as well as a remote bleeder line..
Check Stock

Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2

  • Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
  • Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
  • Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
  • Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.
Check Stock

MuHize Upgraded Brake Line Tubing Kit - 25 Ft. of 3/16 Copper Coated Flexible Tube, Roll 25 ft 3/16\ (Includes 16 Fittings)

  • PACKAGE INCLUDE - MuHize Brake Line Kit Replacement with 16 Fittings: ① 2 x 3/16” (7/16-24) Inverted Tube Nut.
  • ② 10 x 3/16" (3/8-24) Inverted Tube Nut.
  • ③ 2 x 3/16” (1/2-20) Inverted Tube Nut.
  • ④ 2 x 3/16"(9/16-18) Inverted Tube Nut.
  • SUPER EASY BENDING & FLARING - MuHize brake lines are easy to be bent with great flexibility by hand and flare by simple tools..
  • HIGHER QUALITY - MuHize brake lines are made with unique surface treatment. The lastest copper-coated brake line is better than standard steel tubing with corrosion resistance..
  • WIDELY APPLICATION - MuHize 3/16 brake line tubing kit commonly fits for Hydraulic Braking Systems, Fuel Systems, and Transmission Systems,etc. It is also widely fit for household, industrial and commercial uses..
  • PROFESSIONAL - MuHize focus on outstanding features and benefits of braking line. We promise that if the line is installed correctly out, the lines will extend the lifespan of the vehicle..
Check Stock