Top Travel sized Feeler Gauge

4 Pieces Stainless Steel Feeler Gauges Dual Marked Metric Feeler Gauge SAE Offset Valve Thickness Gauge 32-Blade Feeler Gauge Measuring Spark Plug Tool for Measuring Width Thickness

  • Feeler fauge sets: package contains 4 pieces of 32-pieces feeler gauge (measurement: 0.0015-0.035 inch/ 0.04-0.88 mm), adequate size to meet your use and replacement needs.
  • Suitable for designers, engineers, mechanics to measure the thickness of tappet clearances, spark plugs gaps and other hard to reach places.
  • Quality material: made of 65 manganese steel, each spark plug gap measuring tool is resistant to wear and tear and has nice strength, exquisite and durable, features nice precision and hardness, elasticity and wear resistance, lightweight and small size, easy to carry and storage.
  • Easy to identify: dual marked metric and SAE, through the fine manufacturing process, the number of sizes in the feeler gauge and its specifications are clear at a glance and easy to identify.
  • Warm tip: stainless steel feeler gauge has some anti-rust oil to prevent rust, please do not worry.
  • Foldable design: fastened by screws, removable, the plates are bound inside a chromed plate protector to prevent loss of individual plates, designed with a thumb notch for easy selection and expansion, when you use it, you can move the plate out, and when not in use, you can fold it back to prevent corrosion, bending, deformation and damage, simple and convenient.
Check Stock

32 Blades Steel Feeler Gauge Dual Marked Metric and Imperial Measuring Tool

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 32 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88.
  • Inch sizes: 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Check Stock

Stainless Steel Feeler Gauge Measuring Tool Dual Marked Metric and Imperial Measuring (0.038-1.02 mm,25 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 25 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0015 inch/ 0.038 mm to 0.04 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.038, 0.127, 0.152, 0.178, 0.203, 0.229, 0.254, 0.279, 0.305, 0.330, 0.356, 0.381, 0.406, 0.432, 0.457, 0.483, 0.508, 0.533, 0.635, 0.686, 0.762, 1.
  • Inch sizes: 0.0015, 0.002, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020,0. 021, 0.025, 0.027, 0.030, 0.040.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Check Stock

Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Measuring Tool (0.005/0.127-0.02/0.508 mm, 16 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 16 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.005/ 0.127 -0.02/ 0.508 mm, the numbers of size are etched into feeler gauge for easy identification, Warm notice: Please check the product specification and size before purchase..
  • Metric sizes (mm): 0.127 mm, 0.152 mm, 0.178 mm, 0.203 mm, 0.229 mm, 0.254 mm, 0.279 mm, 0.305 mm, 0.330 mm, 0.356 mm, 0.381 mm, 0.406 mm, 0.432 mm, 0.457 mm, 0.483 mm, 0.508 mm.
  • Inch sizes: 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020 inches.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don't worry about that.
Check Stock

Spurtar 32 Blades Stainless Steel Feeler Gauge Dual Marked SAE and Metric Valve Thickness Gauges Measurement Tool for Measuring Gap Width or Thickness 0.001-0.04 / 0.03-1.00mm

  • Easy identification- dual marked metric and imperial, 0.001inch to 0.04inch (0.03mm to 1mm), the numbers of size are etched into feeler gauge for easy identification.
  • User Friendly- The edge of the feeler gauge is steel and polished. It's full of bright metal texture specially treated, smooth and doesn't hurt your hand.
  • Foldable- Feeler gauges fold into a plated steel case with a thumbscrew, easy to carry, convenient to take and safe to store.
  • Tapered feeler gauge set is made of high quality flexible 65 manganese steel, hardened and polished for long time and accurate usage.
  • The Feeler Gauge Set is coated with vaseline. With this protection, the feeler gauge doesn't get rusty and easy to open..
Check Stock

Stainless Steel Feeler Gauge Measuring Tool Dual Marked Metric and Imperial Measuring (32 Blades,0.03-1 mm)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 32 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.001 inch/ 0.03 mm to 0.04 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.45, 0.50, 0.55, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 1.00.
  • Inch sizes: 0.001, 0.0015, 0.002, 0.0025, 0.028, 0.003, 0.0035, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.01, 0.012, 0.013, 0.014, 0.015, 0.016, 0.018, 0.02, 0.022, 0.024, 0.025, 0.026, 0.028, 0.03, 0.032, 0.034, 0.034, 0.040.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Check Stock

Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Measuring Tool (0.0015/0.04-0.025/0.635 mm, 26 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 26 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0015/ 0.04 - 0.025/ 0.635 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.04 mm, 0.05 mm, 0.06 mm, 0.08 mm, 0.10 mm, 0.13 mm, 0.15 mm, 0.18 mm, 0.20 mm, 0.23 mm, 0.25 mm, 0.28 mm, 0.30 mm, 0.330 mm, 0.35 mm, 0.38 mm, 0.40 mm, 0.43 mm, 0.48 mm, 0.45 mm, 0.50 mm, 0.53 mm, 0.55 mm, 0.58 mm, 0.60 mm, 0.63 mm.
  • Inch sizes: 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025 inches.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don't worry about that.
Check Stock

Rannb Metric Feeler Gauge Gap Measurement Tool 12-inch Long 17 Blades 0.02-1.00mm Thickness

  • ⭐【Material】The feeler gauge is constructed from manganese steel with a lube oil coating to prevent pitting and corrosion..
  • ⭐【Dimension】Total Size: 300mm x 15 x 6mm/12" x 0.6" x 0.24"(L x W x H).
  • ⭐【Specification】 Metric sizes (mm):0.02, 0.03, 0.04, 0.05,0.06, 0.07, 0.08, 0.09, 0.10,0.15, 0.20, 0.25, 0.30, 0.40, 0.50, 0.75, 1.00. The feeler gauge is marked in metric. Thickness ranges from 0.02mm to 1.00mm..
  • ⭐【Easy to Identify】 Every blade has its thickness clearly on it for easy identification..
  • ⭐【Package Content】1pcs x Feeler Gauge.
Check Stock

Eastyard Stainless Steel Feeler Gauge 32-Piece Blade Tool for Gap Width/Thickness Measurements (Measuring Range: 0.001\-0.04\)

  • High Quality: 32 Hardened, Tempered Steel Blades made of 65 manganese steel, each blade has sizes laser etched for easy identification..
  • Measuring Range：0.001" to 0.04" (0.03 mm-1.00 mm), the numbers of size are etched into feeler gauge for easy identification..
  • Easy to Use: The feeler gauge is easy to carry and store. It can be folded, turned 360 degrees and removed when needed..
  • Scope of Application: Ideal for designers, engineers, and mechanics to accurately measure the thickness of hard-to-reach places..
  • Quality Assurance: It is normal to have some anti-rust oil on the stainless-steel feeler gauge, please don't worry. If you have any product issues, we’re very happy to provide you some advice..
Check Stock

CAMWAY Bent Feeler Gauge 16 Blade Feeler Gauge Imperial/Metric 45º Blades Offset Stainless Steel Feeler Gauge Measuring Tools for Measuring Gap

  • 45º Blades Offset,The stainless steel feeler gauge is used to measure the gap size..
  • Metric sizes (mm): Includes metric sizes 0.508, 0.127, 0.152, 0.178, 0.203, 0.229, 0.254, 0.279, 0.305, 0.330, 0.356, 0.381, 0.406, 0.432, 0.457, 0.483 mm.
  • Standard SAE(inch sizes): 0.020, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, and 0.019 inches.
  • Material:The Bent Feeler Gauge made of 65 manganese steel,high strength. Dimension(L x W x H)：103.7x13x26.5 (mm),Weight：66.1g.
  • Scale clear, easy to use,Metal fastening screws, durable,Please don't put on the humid environment.There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty..
Check Stock

Feeler Gauge MTQY 17 Blade 0.02mm to 1mm Thickness Gap Metric Filler Feeler Gauge Measure Tools

  • Specifications: Feeler gauges are indicated in metric. Thicknesses range from 0.02mm to 1mm..
  • Material: The feeler gauge is made of spring alloy steel, heat treated in its entirety, and coated with lubricating oil, which is not easy to wear to prevent pitting and corrosion..
  • Dimensions: Overall Length: 150mm/5.9inch.
  • Blade Dimensions: 150 x 13mm /5.9 x 0.5inch (L x W).
  • Easy identification: 17 blades have clear thickness on each blade for easy identification..
  • each measuring feeler gauge has 17 blades and can be folded for easy carrying and storage..
Check Stock

WonVon Universal Spark Plug Gap Tool with Feeler Gauge Compatible with Most 10mm 12mm 14mm 16mm Spark Plugs Black

  • Precise control of spacing. Solve the problems of your car's increased fuel consumption, difficulty in starting, unstable idling, and insufficient power..
  • Compatable with - Universal For 10mm 12mm 14mm 16mm Spark Plugs.Used Your Desired Size Feeler Gauge For Gap Thickness.The Kit Provides Feeler Gauge.
  • Spring Back NOTE - Some Spark Plugs Electrode Will Spring Back - This Is Normal For Some Spark Plugs.If Your Gap Target Is 0.44mm We Suggest To Use 0.42mm This Way When It Spring Back You Will Get It To 0.44mm..
  • HIgh Quality Guarantee - Every Tool Is Strictly Tested Before Leaving The Factory.This Spark Plug Gap Tool Will Give You That Perfect Gap Every Time.Simply Place Your Spark Plug Onto The Gap Tool Perfectly..
  • Item Inclute - 1x Spark Plug Gap Tool，1x Feeler Gauge..
Check Stock