Top Traxxas Mini E Revo

Traxxas Metal Servo Gear Set Vehicle

  • Fits Traxxas servos #2070, #2075, and #2075x.
  • Includes everything to upgrade servo gears.
  • This product is made from high quality materials and designed for long-lasting performance.
  • LiPo batteries max out the potential of 1/10 scale vehicles like Slash, E-Revo, Summit, Spartan, and M41 with powerful acceleration and long run times.
Check Stock

Traxxas 1/10 E-Revo Brushless RECEIVER BOX & SCREWS 5624 5526 (Summit Slash by Traxxas

  • Make sure this fits. by entering your model number..
  • Traxxas 1/10 E-Revo Brushless * RECEIVER BOX & SCREWS * 5624 5526 (Summit Slash.
Check Stock

4Pcs 12mm Hex RC Wheels Tires Height 2.99 inch (76mm) for 1/10 On Road and 1/14 1/16 1/18 Scale Models Cars Truck Buggy with Foam Inserts

  • NOT Glued. Check Size before Buying--Outer diameter: 2.99 inches (76mm) | Width: 1.18 inches (30mm) | Hex size: 12mm.
  • Fits for 1/10 On-Road RC Touring Car, Redcat EPX Drift, Traxxas 1/18 Latrax Teton, 1/16 Traxxas Slash, Traxxas 1/16 E-revo.
  • Wheel Rim-Quality Plastic. NOT Pre-Glued..
  • Package include 4x 1/10 On road tires and wheels, with sponge inside, 4x Locknuts, 1x Cross wheel wrench.
  • Quality Guarantee, FriHobby 100% Customer satisfaction is our priority, if you have any issue about this items, please feel free to contact us..
Check Stock

Traxxas 5368 Throttle and Brake Linkage Set

  • Use original Traxxas parts to get the most out of you Traxxas RTR vehicles.
  • Please refer to your vehicle's user for selecting the correct part.
  • Exploded views of your model can be found on the Traxxas website.
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
  • This product is made from high quality materials, and designed for lasting performance.
  • This is for use on RC vehicles such as the Traxxas Revo, consult your user's manual for exact parts listings.
Check Stock

Hot Racing RVO11X06 Aluminum Differential Carrier Case - E-Maxx E-Revo Xo-1

  • Hot Racing is a United States based company.
  • parts are sourced from Chinese producers.
  • All Hot Racing upgrade parts are direct replacements for stock components.
  • This item works with: Traxxas E-Maxx 3908 Brushless, E-Revo 5603 5605 5608, XO-1.
Check Stock

Traxxas 3147X 2' Fuel Line, 58-Pack

  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
  • This product is made from high quality materials and designed for lasting performance.
  • This is for use on RC vehicles such as the Traxxas Revo.
  • consult your user's manual for exact parts listings.
Check Stock

Traxxas 5376 Fuel Tank Rebuild Kit

  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
  • This product is made from high quality materials and designed for lasting performance.
  • This is for use on RC vehicles such as the Traxxas Revo.
  • consult your user's manual for exact parts listings.
Check Stock

Traxxas Motor 2200Kv 75mm brushless (with 6.5mm Gold-Plated connectors & high-Efficiency heatsink)

  • Traxxas 3481 - 2200Kv 75mm Brushless Motor, E-Revo VXL Brushless, UDR.
  • Features: High-Speed Ball Bearings 5mm Motor Shaft TRX 6.5mm Bullet Connectors.
  • Part number(s) included (in factory packaging): 3481.
Check Stock

Traxxas 5451R Revo/Maxx Steel CV Driveshafts (Assembled with Boots)

  • Steel constant velocity driveshafts for 1/10 Revo and T/E Maxx trucks.
  • Designed to handle the extreme horsepower and articulation that your Traxxas truck can dish out.
  • Inner and outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements.
  • Nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents provide head-turning looks.
Check Stock

DAPENGNIAO for Das87 6 Pcs M0.2 Brass 10T-50T Spur Gear Accessories

  • 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
  • Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
  • With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..
Check Stock

Boston Gear L5092 Rack Gear, 14.5 Degree Pressure Angle, 20 Pitch, 2.0 feet long, Steel

  • 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
  • Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
  • With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..
Check Stock

HopsupRC Front Rear Axle Carriers Knuckle Arm Upgrades Part for 1/16 Traxxas E-Revo/Mini Slash/Mini Summit,4PCS Aluminum Left Right Axle Carriers Knuckle Arm Hops Up,Replace 7034,Green

  • 【Fits For】: For 1/16 Traxxas E-Revo VXL 71076-3, 71054-1.
  • 【High-quality Material】: Aluminum Front Rear Body Post Mount are of lightweight and durable performance.Specially designed strengthening cut-outs for increased crash resistance. And allows you to easily replace and upgrade from the original..
  • 【Long-lasting Performance】: The upgrades part is durable enough,improves the overall performance of the rc car.Specially designed strengthening cut-outs for increased crash resistance..
  • 【Easy to install】: Easy to install, great for replace the old or broken part.Increase overall performance and durability of your RC car..
  • ❤【HopsupRC Guarantee】:If you are not 100% completely satisfied with our products, please feel free to contact us to request a refund or exchange! our team is willing to help you to solve the problems that you have met,Your Satisfaction is Our Top Priority..
Check Stock