Top Traxxas Stampede Motor - BuyWiseBest.com

STAMPEDE 4X4 VXL MOTOR VELINEON 3500 BRUSHLESS #3351R SLASH RUSTLER TRAXXAS #67086-3

Make sure this fits. by entering your model number..
Will fit Slash, Stampede, Rustler Bandit & Many other models..
Updated 3500 Motor for use with VXL-3S 3355R ESC (Not Compatible with 3355x ESC).
4-pole, 10-Turn, 3500Kv version with braided wires..

...intered Neodymium magnets provide massive torque and linear power.
Widest range of battery options ranging from 4-cell NiMH or NiCad packs all the way up to 3S LiPo battery packs (11.1 volt)DescriptionThe Traxxas 3350R is the perfect upgrade for your brushed Traxxas vehicle. The system installs easily in our Bandit, Stampede, Rustler, and Slash models. Use your stock battery or go with a more powerful 11.1V 3s LiPo battery to unlock the 60+mph potential of your vehicle with this brushless system powerhouse! The Velineon VXL-3s forward/reverse electronic speed control simplifies brushless technology with easy operation that gives you all the control you need for maximum fun. Quickly choose from 3 drive profiles in exactly the same manner as other Traxxas electronic speed controls (such as the XL-5). Profiles include: Sport, Race, and Training Mode (patented). Training Mode limits full-throttle power to 50% allowing young or new drivers to safely develop their control skills before unleashing the full-throttle capability of the Velineon system. High-frequency transistors and advanced circuit design deliver incredibly smooth and refined throttle control. High-current capacity (320 amps peak) and two-stage thermal protection frees you from motor limits. T....

Outer diameter(Height): 5.12" (130mm) | Width: 2.64" (67mm).
The Tires and Wheels Not Glued. You need to you glue the edges of the inside of the wheels&tires.
Fits for Traxxas Rustler VXL 2WD, Traxxas Rustler 4x4, Traxxas Stampede VXL 2WD, Traxxas Stampede 4x4, Redcat Volcano EPX Pro, Redcat Blackout XTE Pro, and most 12mm Hex Hubs 1/10 Scale Monster Truck Off Road Models..
Note the cheap ones. The Wheel Rims Made of high quality Nylon, Durable, NOT EASY BROKEN when working with 2S 3S Brushless. Quality Rubber & Foam, Good Grip & Wear-resistant.
Novel appearance and exquisite workmanship. Hobbyfire Quality Guarantee- 100% warrenty.

Replacement rear springs for the Traxxas Rustler or 2WD Stampede.
Brilliant pink paint lets you customize your ride.
Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.

Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
This product is made from high quality materials and designed for lasting performance.
This is for use on RC vehicles such as the Traxxas Stampede, Rustler, Slash, Bandit.
consult your user's manual for exact parts listings.

Replacement front springs for the Traxxas 2WD Stampede.
Brilliant pink paint lets you customize your ride.
Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.

Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
This product is made from high quality materials and designed for lasting performance.
This is for use on RC vehicles such as the Traxxas Stampede.
consult your user's manual for exact parts listings.

Easy upgrade replace Traxxas stock part #6832 Caster blocks(c-hubs)，#6837 Steering blocks.
Fits: Traxxas 1/10 Slash 4X4 ,1/10 Stampede 4X4,1/10 Rustler 4X4,1/10 Slash 4X4 VXL Ultimate Platinum,1/10 Stampede 4X4 VXL,1/10 Rustler 4X4 VXL.ST....
Precision CNC machined,Anodized 6061-T6 aluminum for lightweight and durable performance..
Includes Caster blocks&Steering blocks(L/R),5x11x4mm bearings(2),10x15x4mm bearings(2),Bushing Sleeves(4),Screws(6),PTFE washers(2),Suspension Screw....

RC 1/10 front caster steering blocks kit can be easily upgraded and replaced #3632 Caster blocks, #3736 Steering blocks, #3752 Stub axle carriers (rear)..
Front steering block knuckle kit is only compatible with 1/10 Traxxas 2WD Slash, Stampede, Stampede VXL, Slash VXL, Rustler, Rustler VXL, Ford F-150 Raptor RC vehicle ONLY..
Suitable for traxxas rustler 2wd steering blocks use aluminum alloy material, more wear-resistant, not easy to deform..
Multi-hole design, adjustable tie rod angle can be used for Traxxas Slash 2WD Caster Block.
Globact 2WD caster steering blocks Include(Necessary parts required for installation): 2*Rear Stub Axle Carriers, 2*Steering Block, 2*Caster Blocks (L/R), 6*Screw Pins, 2*Screw, 8*5x11x4mm bearings, 4*Gasket..

Requires part #2640 for a complete suspension pin set.
Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
This product is made from high quality materials and designed for lasting performance.
This is for use on RC vehicles such as the Traxxas Rustler.
consult your user's manual for exact parts listings.

✔ Compatible With traxxas slash 4x4/ traxxas rustler 4x4 vxl/traxxas slash 2wd/traxxas rustler/traxxas bandit/traxxas stampede/Rally 4X4/Hoss 4x4 VXL.
✔ Fitted Really Well.Oil Filled Style,Adjustable Tension,Very Smooth And Durable.Good for Big Jumps..
✔ Alloy Aluminum Front Shock Absorber : Approx.100mm.
Alloy Aluminum Rear Shock Absorber : Approx.110mm.
✔ 4 Shocks Per Package. All Hardware For Assembly Included..
✔ Premium Quality Aluminum Shocks Upgrade Parts Ship Fast .Responsive Customer Service..

Made of Aluminum, CNC Machined and Lightweight: last performance for driving fiercely.
12mm Wheel Hubs (Thickness 7mm): replace #3654, Upgrades for 1:10 2WD Slash/Stampede/Rustler VXL.
12mm Wheel Hubs (Thickness 5.5mm): replace #1654, Upgrades for 1/10 4x4 Slash/Stampede/Rustler VXL /Rally, Nitro Slash/Stampede/Rustler VXL.
Come with Self-lock Nuts,Washers and Pins.
Complete Wheel Hubs Set for 1/10 Traxxas 2WD Slash / Stampede / Rustler VXL.