Top Traxxas Xo Differential

Traxxas Accessories/Tools Vehicle

  • Waterproof digital high Torque, metal gear servo with ball bearings.
  • Designed for 1/10 scale Traxxas vehicles like Slash, trx-4, 4-tec 2.0, Rustler, Bandit, Stampede, E-Revo, E-Maxx, XO-1, Rally, Spartan, DCB M41, and others.
  • LiPo batteries max out the potential of 1/10 scale vehicles like Slash, E-Revo, Summit, Spartan, and M41 with powerful acceleration and long run times.
Check Stock

DAPENGNIAO for Das87 6 Pcs M0.2 Brass 10T-50T Spur Gear Accessories

  • 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
  • Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
  • With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..
Check Stock

Boston Gear L5092 Rack Gear, 14.5 Degree Pressure Angle, 20 Pitch, 2.0 feet long, Steel

  • 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
  • Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
  • With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..
Check Stock

Hot Racing RVO11X06 Aluminum Differential Carrier Case - E-Maxx E-Revo Xo-1

  • Hot Racing is a United States based company.
  • parts are sourced from Chinese producers.
  • All Hot Racing upgrade parts are direct replacements for stock components.
  • This item works with: Traxxas E-Maxx 3908 Brushless, E-Revo 5603 5605 5608, XO-1.
Check Stock

Traxxas 7744 X-Maxx Front & Rear Skid Plates

  • Traxxas 7727X rear upper and lower Bulkhead.
Check Stock

Traxxas TRA5040 Oil, differential (20M weight) (standard)

  • Traxxas 5040 - Diff Oil 20M wt, Standard.
  • Includes: (1) Container of Differential Oil.
  • Part number(s) included (in factory packaging): 5040.
Check Stock

Traxxas 7579X Gear set differential metal

  • Metal differential gear set for Latrax 1/18 scale vehicles.
  • Metal gears may be retrofitted into Latrax 1/18 scale vehicles like the Teton and Rally.
  • Kit includes two output gears, four spider gears, 35T ring gear, and shaft.
  • This product is made from high quality materials and designed for lasting performance.
  • Use Traxxas stock and hop-up Replacement parts to get the most out of you Latrax RTR vehicles.
Check Stock

Front/Rear Aluminum Suspension Control A Arms Upgrade Parts 3655X for Traxxas 1/10 Slash 4x4 Stampede VXL 4WD RC Car Truck

  • Front/rear control a-arm set for Traxxas 1/10 Slash (VXL) 4x4, Stampede (VXL) 4WD, Rally and XO-1 RC car.
  • Upgrade of Parts #3655x, Easy to replace original A-Arms.
  • High quality aluminum, red anodized, superb craftsmanship.
  • CNC machined with precision, lightweight and durable.
  • Include suspension a-arms(4pcs), pins (4pcs) and E-clips (8pcs).
Check Stock

4Pcs RC Front and Rear Drive Shaft Replacement Axial CVD Heavy Duty Compatible with 1/10 Traxxas Slash 4X4/ Rustler VXL/Stampede VXL/Hoss VXL 4X4 Platinum/Ultimate (Upgrade)

  • 1.Durable:Made of high-quality steel material, Hard anodic oxidation and anti-rust treatment on gear surface, long service life for these gears.
  • 2.Work smoothly: The gears are CNC machined, good machining made them roll smoothly.
  • 3.Easy to install,can replace the stock front differential perfectly（#5381 #6882 #5379）.
  • 4.Suitable for TRAXXAS SLASH 4X4,SLASH 4X4 VXL, Rustler 4×4, Rustler 4×4 VXL, Stampede 4X4, Stampede 4X4 VXL,Please consult your owner’s manual for more information on recommended differential your specific model..
Check Stock

Traxxas 58094-1 2WD Slash Short Course Truck Fox

  • Titan 12-Turn 550 Modified Motor and XL-5 ESC provide speeds up to 30 mph.
  • waterproof electronics for all-weather driving in water, mud and snow.
  • The TQ 2.4GHz radio system's ergonomic design is comfortable for all-day driving and its internal antenna is impervious to damage.
  • Includes Traxxas 7-cell NiMH battery with iD technology and 4-amp 12-volt DC peak-detecting fast charger for reliable charging.
  • Metal gear Magnum 272 transmission with Torque-Control slipper clutch and hardened steel gears in the differential.
  • Officially licensed Ford Raptor body features an injection molded grill, integrated bumper, side mirrors and tailgate for scale realism.
Check Stock

Hobbypark Aluminum Front & Rear Suspension Arms Traxxas 1/10 Slash 4x4 Stampede 4x4 Rustler 4x4 VXL Replacement of 3655 Option Hop Ups 4-Pack

  • ✔Replace Stock Part 3655X 3655P 3655L 3655G 3655R 3655T 3655A, come with Screw pins, Easy to install, the perfect to replace original A-Arms, Highly....
  • ✔Compatible with Traxxas 1/10 Slash 4x4 & VXL & Platinum, 1/10 Stampede 4x4 & VXL, 1/10 Rustler 4x4 & VXL, 1/10 Hoss 4X4 VXL, 1/10 XO-1.
  • ✔Made of 6061-T6 Aluminum Alloy,Anodized,CNC machined for precision.Lightweight and Durable. Increased strength and precision. Easy upgrade from the....
  • ✔Includes Alloy Front & Rear Suspension(2x Left, 2x Right), Screw Pins (4) Suspension Pins(4), Screws(4).
  • ✔100% New, Genuine HobbyPark RC Products,Exquisite workmanship & Durable,Buy with Confidence,Friendly Customer Service..
Check Stock

Hobbypark 4-Pack Front & Rear Aluminum Suspension Arms for Traxxas 1/10 Slash 4x4 Upgrades Compatible with Stampede 4WD Rustler 4X4 VXL -Replaces Part 3655

  • ✔Replacement of Stock Part 3655X 3655P 3655L 3655G 3655R 3655T 3655A, come with Screw pins, Easy to install, the perfect to replace original A-Arms,....
  • ✔Compatible with Traxxas 1/10 Slash 4x4 & VXL & Platinum, 1/10 Stampede 4x4 & VXL, 1/10 Rustler 4x4 & VXL, 1/10 Hoss 4X4 VXL, 1/10 XO-1.
  • ✔Made of 6061-T6 Aluminum Alloy,Anodized,CNC machined for precision.Lightweight and Durable. Increased strength and precision. Easy upgrade from the....
  • ✔Includes Alloy Front & Rear Suspension(2x Left, 2x Right), Screw Pins (4) Suspension Pins(4), Screws(4).
  • ✔100% New, Genuine HobbyPark RC Products,Exquisite workmanship & Durable,Buy with Confidence,Friendly Customer Service..
Check Stock