Top Tripod Light Bracket Adapter

Updated Anwenk Flash Cold Shoe Mount Adapter Flash Shoe Mount Flash Stand Adapter with 1/4\-20 Tripod Screw Thread for Camera Flash Nikon Canon Olympus Panasonic Speedlite Flash, 2Pack

  • Updated Cold Shoe Flash Stand Adapter. Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
  • Updated: NO SPRING. Never have to worry about the springs falling out again. That makes your expensive flash be held tightly and safely not by the springs lock, but your hot shoe locking wheel.(Your accessories should have hot shoe locking wheel in order to lock down to this cold shoe mount)..
  • Universal 1/4" Tripod Screw -Metal cold shoe to mount your flash onto bracket or tripod/light stand..
  • Smart Design - With a stop screw on the shoe mount adapter to prevent shoe mount accessories from accidentally sliding forward and keep your accessories silde Perfectly in right place..
  • Material: Metal construction with black anodized for higher durability..
Check Stock

Fotopro Flexible Phone Tripod Camera Tripod with Dual 1/4 Screw & Bluetooth Remote Control & Smartphone Mount for iPhone DSLR Samsung Huawei

  • DUAL SCREWS BRACKET - The metal bracket allows mount two device for simultaneous film and stream. Twist-ring at the end of each screw ensure a snug....
  • FLEXIBLE TRIPOD LEGS - The waterproof rubber legs is easier to bend and maneuver to accommodate fixing it to bicycle, around a pole, or even hanging....
  • MULTI-ANGLE ADJUSTABLE - Ball head of the phone tripod provides a 360° shooting perspective. Allowing you to capture different angles on your trip.....
  • LARGE COMPATIBILITY - The universal 1/4" screws accept any handset adapter and most camera screw holes. Tripod stand suitable for most smartphone,....
  • LIGHTWEIGHT and PORTABLE - Fotopro flexible tripod with a weight of only 260g, a leg length of 9 inch (23cm), is short enough to fit perfectly in your....
Check Stock

Neewer Professional Universal E Type Camera Flash Speedlite Mount Swivel Light Stand Bracket with Umbrella Holder for Canon Nikon Pentax Olympus and Other Flashes Studio Light LED Light 3 Pack

  • Flash cold mount shoe bracket, Light Stand Mount with Umbrella Holder.
  • Top cold shoe clip design fits most Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light(Note:this adapter does....
  • A hole specially designs for holding umbrellas,180° vertical and 360° horizontal adjustment.
  • Mount with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand.
  • Note: Light stand, speedlite flash and umbrella are not included.
Check Stock

SUPON Super Clamp + Mini Ball Head Bracket Mount + 1/4' to 1/4' Screw and 1/4' to 3/8' Screw for Rig,Monitor,DSLR,Backdrop,Flash,LED Light,Light Stand,Bike,Motorcycle,Rod,Tripod,Action Cameras

  • SUPON Super Clamp is can fix on to any shaped body like cameras, lights, umbrellas, hooks, shelves, plate glass, bike, motorcycle, Rod, tripod, monopod, cross bars,etc. Combine with Ball Head Mount,it could attach and detach from the monitor quickly and the position of the monitor is adjustable as per your needs during shooting..
  • Comes with a mini Ball head Mount, with 1/4 inch Screw Mount, uses to mount accessories onto a flash bracket.
  • 360-degree articulation,Ball head can be adjusted into most position, makes you a comfortable use. Perfect for DSLR Film Movie Rig, Monitor, Flash, LED Lights, Track Slider, Light Stand, Action Camera, etc..
  • 1/4" To 3/8" Screw&Nut Adapter- The detachable 1/4" to 3/8" screw socket at the bottom, which can be converted by yourself, allow the U shape flash bracket to attach to a tripod or light stand. Note: Received the flash bracket with the convert screw. Release the screw to get 1/4” thread or 3/8” thread..
  • Metal construction with black anodized for higher durability..
  • Non-slip rubbers on the inner side provides strength and stability. Maximum opening diameter: 2.16". Ideal for clamping items 0.6"-1.73" in diameter..
Check Stock

1/4 Mini Ball Head Hot Shoe Mount Adapter Ring Light Adapter for Cameras Camcorders Smartphone Gopro LED Video Light Microphone Video Monitor Tripod Monopod-Black

  • 【STANDARD HOT SHOE ADAPTER】The hot shoe adapter has a standard 1/4" hot shoe adapter (0.72"*0.72"),it will fit most Dslr cameras Compatible with....
  • 【FLEXIBLE POSITIONING】 When you twist the locking knob control,it can go to the exact position according to your needs by 360 degree rotation. The....
  • 【1/4" SCREW MOUNT】 Use to mount accessories onto a flash bracket, and fits for most DSLR camera, camcorder, tripod, LED video light, flash light,....
  • 【STURDY AND DURABLE】 Max load: 3.5lbs.It is lightweight but made of sturdy Aluminum Alloy and precise CNC process anodized aluminum materials,....
Check Stock

Neewer Two(2) Pack of Durable Pro 1/4\ Mount Adapter for Tripod Screw to Flash Hot Shoe

  • This adapter permits the devices with standard 1/4" screw hole to be installed on flash hot shoe slot. It includes 2 nuts which can be adjusted..
  • It can install NIKON SC-28 Flash Sync Cord to VH2000 Camera Flash Bracket Grip. It can install YONGNUO CTR-301P Flash Remote Trigger to Flash Shoe Umbrella Holder Stand Bracket..
  • 2 pack of 1/4" tripod screw to flash shoe mount adapter.
Check Stock

80x100 HD Monocular Telescope for Adults with Smartphone - High Power Monocular with Adapter Lightweight BAK-4 Prism & FMC Lens Monoculars for Bird Watching Stargazing Hunting Camping Hiking Travel

  • ...t the bottom of monocular offers steady viewing when connect a monocular tripod.
  • 【Wide Compatibility】1Non-limited for glasses-wearer.The design of this monocular allows the wearer to get close to the eyepiece without interfering with the viewing experience and feel more comfortable.2.Equipped with a mobile phone bracket, which is suitable for many types of smart phones on the market. 3.Both adults and children can use it..
Check Stock

ASHINER 63' Phone Tripod Selfie Stick - Adjustable Camera & Cell Phone Tripod Stand with Bluetooth Remote, Portable Heavy Duty Aluminum Holder for Video Recording, Vlogging, Live Streaming

  • 【Reasonable Lock Design】The cell phone tripod adopts screw lock to fix the shooting angle at the top and the opening angle of the bottom tripod, which greatly increases the stability of the tripod for cell phone. The selfie stick tripod adopts four plate buckles to fix the height of the mobile phone bracket, which can quickly and easily adjust the shooting height..
  • 【Reasonable Height】The portable tripod is adjusted in 4 sections, the height can be flexibly adjusted between 16 inches and 63 inches. The three tripods can be used as a selfie stick when the tripod is folded. Open the tripod and adjust the height, it can also be used as a desktop tripod or a live mobile phone bracket.The tripod is applicable to any situation such as video shooting, group photos, vlogging, adventuring, taking selfies..
  • 【Stable Base Frame】The length of the three base feet of the smartphone tripod reaches 10.24 inches, the triangular contact area between the mobile phone stand and the ground reaches a maximum of 1008 square centimeters. In addition, the bottom of the phone camera stand adopts a new "umbrella" skeleton, three aluminum alloy tubes are added at the connection between the three base feet and the central aluminum tube to increase the stabili....
Check Stock

1/4 Inch Male to 3/8 Inch Female Tripod Screw Adapter 3/8 to 1/4 Tripod Adapter Mount Screws, Accessories for Camera/Tripod/Monopod/Light Stand

  • The tripod screw adapter, precision made 1/4" male to 3/8" male screw adapters (3 pcs) and 1/4" to 3/8" nut screw adapter (3 pcs). Standard size, reliable quality, and easy to connect and use..
  • The camera mount screws can putting two photo equipment devices together, help you gain more rig combination possibility and freedom in your photo shooting..
  • The 1/4 to 3/8 tripod mount screw adapter nut screws made of high metal materials, light weight and solid.
  • others adapters are made of metal, silver plated surface , high strength, anti-rust,solid and durable..
  • The tripod thread screw adapter has wide application. Fit for most dslr camera/ tripod/ monopod / ball head /flash light stand/ shoulder rig camera accessories..
  • 1/4 to 3/8 adapters thread adapter, package including:3 screw adapters+3 nut screw adapters.
Check Stock

2 PCS Aluminum Camera Tripod Adapter 1/4'-20 Conversion Adapter Mount Compatible with Gopro Action Cameras insta360 and Other Standard 1/4 Accessories, Quarter Inch Thread to GoPro Ecosystem

  • Tripod mount for gopro is perfect for all standard 1/4 action camera, digital camera,video camera, LED light,recorders, or any 1/4” accessories..
  • This tripod adapter is designed to fit any standard 1/4”-20 threading cameras to attach to gopro hero session, tripod, bycicle handle bar and other accessories..
  • Made of full CNC aluminum material, ensures this camera tripod mount adapter solid and durable. Light weight makes it more portable to carry out..
  • 1/4 inch camera adapter with rubber pad design on the top to prevent unwanted swivel, stops causing camera loosening comparing to others without rubber..
  • Package including: 2pcs 1/4’' camera mount adapter.
  • It fits any standard 1/4”-20 cameras attach to GoPro mount, tripod, bicycle handle bar and other accessories..
  • Package including: 2* 1/4'' Camera Mounts. Works with all GoPro Hero3, Hero4, Hero5, Hero6, Hero7 mounting ecosystems,Sony,Xiaomi,Sjcam Action Cameras and Other Standard 1/4 Accessories.
Check Stock

Duck Stance

  • ...es with two replaceable eyepieces and a 3x Barlow lens that can triple the magnifying power of each eyepiece. This allows for a range of magnification options, making it easier to observe objects at different distances..
  • Wireless Remote: The 5x24 finder scope with mounting bracket and cross-hair lines can help to locate objects easily, even for beginners. The included wireless remote and smartphone adapter can allow for easy and convenient exploration of the night sky, as well as capturing stunning celestial images..
  • Adjustable Tripod: This telescope allows for many different viewing positions with a adjustable aluminum alloy tripod and carry bag make it easy to set up and transport the telescope to different locations..
Check Stock

Neewer LED Video Light Panel Camera/Camcorder Video Fill Lighting, 160 SMD LEDs Bi-Color 3200K-5600K, Ultra Thin Anodized Aluminum Housing for All DSLR Cameras, with Cold Shoe Adapter/Battery/Charger

  • ...ndex) up to 95%. The premium aluminum alloy plate cover makes the LED photography light more durable.
  • Side vents for fast heat dissipation, easy to cool.
  • COMPACT & WIDE APPLICATION: With a standard cold shoe mount adapter, the light angle can be adjusted while mounted on any DSLR camera, tripod, bracket, or light stand, etc. It is a pocket-sized LED fill light being incredibly compact and lightweight and is powerful in the palm of your hand. It is an ideal choice for photography work, live video, film photography and interview applications, etc.
Check Stock