Top Trucks For Skateboard 2

FREEDARE Skateboard Wheels with Bearings 52mm, Skateboard Trucks, Skateboard Grip Tape, Skateboard Tool, Skateboard Riser Pads, Skateboard Hardware Set (AM-Blue&Silver Trucks)

  • Skateboard Parts Kit:Freedare skateboard wheels 52mm with installed bearings.
  • 52mm Skateboard Wheels:Freedare skateboard wheels are 52mm(diameter)*30mm(width) 98A polyurethane material. The 608 abec-7 bearing is 22mm*8mm, which have been installed on wheels. The premium wheels with high quality bearings help you do street tricks very well. It’s also favored by most freestyle skaters because of their light weight..
  • 129mm Trucks:Freedare skateboard trucks 129mm(5 inches) are suitable for 7.5-8 inches decks. We are offered a selection of 129mm trucks and four-hole skateboard riser pads and baseplates. They get higher quality and professional than six-hole skateboard riser pads and baseplates..
  • 9" x 33"(23cmx84cm) Skateboard Grip Tape: Freedare skateboard grip tape with specific OS780 SiC gravel bonding process has high-intensity grip and friction. Resin glue with super viscosity and stability will not loss of stickiness in hot and cold environments. Hundreds of barely-visible perforations that allow air to escape for a bubble free application..
Check Stock

DreamFire 92a Skateboard Bushings Skateboard Truck Longboard Pennyboard Cruiser Blue Clear 12pcs

  • This is a 92A Hardness longboard skateboard bushings kit.
  • This is perfect for re-building a set of trucks with DreamFire Skateboard Truck Medium Bushings.
  • This skateboard bushing kit Enough for 2 trucks.
  • You will get 4 bushings, 4 cup washers, 2 large pivot cups， 2 medium pivot cups.
  • 100% full refund if you are not satisfied with this item, please do contace us via amazon.
Check Stock

VJ 5.25 139mm Skateboard Trucks Silver Skateboard Wheels 54mm Skateboard Bearings Skateboard Pads Skateboard Hardware 1.25 54mm White

  • SKATEBOARD PARTS SET: It includes skateboard trucks 5.25 (139mm), skateboard wheels 54mm, skateboard bearings Abec 7, skateboard screws 1.25",....
  • MID-SIZED SKATEBOARD TRUCKS, These are 5.25inch hanger 8inch Axle aluminum trucks w/ 90a hardness bushings and 4-hole baseplates, which will fit the....
  • GOOD ALL-PURPOSE SKATEBOARD WHEELS, Our wheels 52mm, 53mm, and 54mm are 99a durometer which are easy to get off the ground. They are hard wheels and....
  • 608 STANDARD ABEC 7 SKATEBOARD BEARINGS, These skateboard bearings are the most common 608 industry standard and match up with nearly every skate....
  • SUITABLE FOR 8"-8.25" SKATEBOARD DECK, This skateboard set fits all 8” to 8.25" skateboard decks. We suggest you use a skateboard tool or wrench and....
Check Stock

Gullwing Trucks 10" Sidewinder II Aqua/Black/Aqua Skateboard Double Kingpin Trucks - 7.25" Hanger 10.0" Axle (Set of 2)

  • One (1) set of two (2) Black Gullwing Trucks Sidewinder II Black Skateboard Double Kingpin Trucks - 7.25" Hanger 10.0" Axle (Set of 2).
  • Standard Phillips Head Devil Blue Skateboard Hardware Set - 1".
  • This is a bundle of 2 items - (1) set of skateboard trucks + (1) set of mounting hardware.
Check Stock

BESIY Skateboard Trucks Skateboard Bearings & Wheel Hardware Set with Polished Skateboard Screws 1 and Practical Wrench 1 … Aluminum Color

  • Skateboard Parts Kit: skateboard wheels 52mm with installed bearings.
  • The 608 abec-7 bearing is 22*8*7, which have been installed on wheels. The premium wheels with high quality bearings help you do street tricks very well. It’s also favored by most freestyle skaters because of their light weight..
  • 129mm Trucks: skateboard trucks 129mm(5 inches) are suitable for 7.5-8 inches decks. We are offered a selection of 129mm trucks and four-hole skateboard riser pads and baseplates. They get higher quality and professional than six-hole skateboard riser pads and baseplates..
  • All-in-One Skate Tools: We supply a T tool in this package. The all in one skate T tool has everything you need to tighten up or repair your skateboard. This skate tool works with all types of the skateboard. It's time for you to create your own skateboard..
  • We provide you high performance products as well as the best price. We offer a 6-month warranty on all complete wheels. We sincerely appreciate you like all our products..
Check Stock

VJ Skateboard Truck and Wheel 5.0 Skateboard Trucks Silver w/Skateboard Crusier Wheel 60mm Skateboard Bearings Skateboard Screws Skateboard Riser Pads Black

  • SKATEBOARD PARTS SET: It includes skateboard trucks 5.0 (127mm), skateboard wheels 60mm, skateboard bearings Abec 7, skateboard screws 1.25",....
  • MID-SIZED SKATEBOARD TRUCKS, This is 5inch hanger 7.6inch Axle aluminum trucks w/ 90a hardness bushions and 6-hole baseplates, which will fit both the....
  • SKATEBOARD CRUISER OLD SCHOOL WHEEL, Our skateboard wheel 60mm is soft-mid hardness, for riders skating longboards, old-school boards, downhill, and....
  • 608 STANDARD ABEC 7 SKATEBORD BEARINGS, This skateboard bearings is most common 608 industry standard and match up with nearly every skate wheel. The....
  • SUITABLE FOR CRUISER AND OLD SCHOOL DECK, This skateboard truck and wheel set fits all 7.8” to 10" width skateboard cruiser and old school decks. We....
Check Stock

Skateboard Longboard Truck Replacement Bushings 4-Pack (for 2 Trucks) - Many Colors and Durometers (88A Blue)

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features a conical top bushing and a cylindrical bottom bushing.
  • Package includes a set of 2 top bushings and 2 bottom bushings, which is enough to outfit your entire skateboard (kit includes bushings for 2 trucks).
Check Stock

Skateboard Longboard Truck Replacement Bushings 4-Pack (for 2 Trucks) - Many Colors and Durometers (96A Red)

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features a conical top bushing and a cylindrical bottom bushing.
  • Package includes a set of 2 top bushings and 2 bottom bushings, which is enough to outfit your entire skateboard (kit includes bushings for 2 trucks).
Check Stock

Dime Bag Hardware Skateboard Truck Rebuild Kit Bushings Washers Pivot Cups for 2 Trucks (96A Red)

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features conical top bushings and cylindrical bottoms bushing, along with pivot cups and cup washers.
  • Package includes a set of 2 top bushings, 2 bottom bushings, 2 pivot cups, and 4 cup washers, which is enough to outfit your entire skateboard (kit includes bushings for 2 trucks).
Check Stock

Dime Bag Hardware Skateboard Truck Rebuild Kit Bushings Washers Pivot Cups for 2 Trucks (88A Blue)

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features conical top bushings and cylindrical bottoms bushing, along with pivot cups and cup washers.
  • Package includes a set of 2 top bushings, 2 bottom bushings, 2 pivot cups, and 4 cup washers, which is enough to outfit your entire skateboard (kit includes bushings for 2 trucks).
Check Stock

BESPEED Skateboard Trucks 5.25\ Raw Set of 2 Fits 8.0\-8.5\ Decks Pair Aluminum Alloy Polished Hollow Light Weight Standard (Black-Blue, 5.25\)

  • 【Exquisite workmanship】This skateboard hardware adopts aluminum alloy casting and die-casting process, medium carbon steel hardening treatment, and metal baking paint, which enables the scooter to withstand greater weight and pressure..
  • 【Suitable for Beginners】This skateboard trucks and wheels set has a hardness of 95a and a rebound rate of 60%, which is very suitable for beginners. The hardness is too high and it is easy to slip, so don't worry about the wheel cracking..
  • 【Superior Performance】This skateboard trucks adopts 608 standard ABEC-9 skateboard bearing, the excellent bearing can rotate continuously for 30 seconds without load, giving you an unprecedented smooth feeling..
  • 【Applicable Models】This skateboard trucks fits 7.5-8" skateboard decks, and the skateboard set fits all 7.5 to 8" skateboard decks..
  • 【Skateboard Parts Set】 Set includes Scooter 5.0, Skateboard Wheel 52mm, Skateboard Bearing ABEC-9, Skateboard Screw 1.
Check Stock

Yocaher Punked Complete Skateboards 7.75 or Mini Cruiser or Micro Cruiser Shapes - Pika and Chimp Series Complete -01-7.75 Pika

  • Skateboard Deck: 31" x 7.75", 7-Ply Maple, Mellow Concave, Trickboard - Concave, Kicktail, Nose.
  • Skateboard Trucks: 7.675 HD5 Heavy Duty 2 Tone Trucks, 125mm Hanger, Aluminum Alloy.
  • Skateboard Bearings: ABEC-7 Chrome Bearings.
  • Skateboard Grip tape: Black Widow Premium Grade 80A Black Griptape.
Check Stock