Top True Centering Gauge

Roadiress Dial Bore Gauge Kits for Internal Dimensions Measurement Cylinder Measurement Tool Dial Indicator Bore Gauge

  • PACKAGE. The accessories of dial bore gauge kits are relatively complete, with extension rods, small parts, etc., which are easy to use and practical..
  • CHARACTERISTIC. The internal dimensions measurement tool can measure 50-160mm, with an accuracy of 0.01, wide range, high accuracy and strong applicability..
  • FUNCTION. The dial indicator bore gauge is used to measure the internal dimensions that are not easy to measure. The comparison method makes the test data more reliable..
  • SUITABILITY. The cylinder measurement tool uses metal materials, which are strong and durable.
  • and self-centering makes it easier to use. It is a good internal measure tester..
  • CUSTOMER SERVICE. If you encountered any questions, please feel free to contact us..
Check Stock

Oudtinx Dial Bore Gauge Set Range 50-160mm(1.97-6.23') Diameter Indicator Measuring Engine Cylinder Tool Kit

  • The bore gauges are used to measure internal dimensions of work pieces by comparative method.
  • This dial bore gauge set are equipped with a good guiding protective bridge which can be self-centering exactly and reliably.
  • The moveable anvil on one side and an interchangeable on another side , which serves for setting the bore diameters.
  • This dial indicator with magnetic base and point precision inspection set is measuring range is 35-50mm.Easy to measure, and with high accuracy, which is 0.01.
  • The inner diameter dial gauge kit is equipped with a portable case, which can be put in the case after using, and is not easy to be lost..
Check Stock

Door Hinge Jig, Door Hinge Mortiser, Hinge Installation Kit, Door Hinge Router Template Fits for Door Hinge from 3” to 5” Length and 1/4” or 5/8” Thickness.

  • ...4” and 5/8“ thickness. (Template Size: 7.8” L×3.5”W×2”H.).
  • 【Easy to Install and Use.】The hinge router template can be adjusted for both hinge length, thickness, and round vs. square corners. Also, it has a built-in depth gauge on the side for the attached router bit to set depth and comes with a self-centering hinge bit to ensure hinges screws are perfect. The corner pieces for routing different radius hinges work well too..
  • 【No Need for a Hammer and Chisel.】You just need to use this hinge template and a router or compact router to install your door hinge.(Router not included) Located on outer wall of routing area, just set the depth by using the router bit depth gauge and cut out the door hinge shape from template area.(Thin hinges: 3”,3-1/2”.4” on the left and thick hinges: 4-1/2”,5” on the right.) Definitely better and faster than using a Chisel..
  • 【Durable and Reliable Structure.】Made of sturdy plastic material and silicone anti-skid pads on both sides, this door hinge mortiser template is stable enough and will not damage your door when you install the door hinge and it is durable for you to use it frequently..
  • 【Package Included.】1 Door Hinge Mortiser, 1 User Manual and 3 Included Bits – 1x Router Bit, 1x Self ....
Check Stock

Hilitand Dial Bore Gauge Set Range 50-160mm 1.96-6.3 Inch Diameter Indicator Measuring Engine Cylinder Tool Kit with Case

  • The bore gauges are used to measure internal dimensions of work pieces by comparative method.
  • This dial bore gauge set are equipped with a good guiding protective bridge which can be self-centering exactly and reliably.
  • The moveable anvil on one side and an interchangeable on another side , which serves for setting the bore diameters.
  • This dial indicator with magnetic base and point precision inspection set is measuring range is 50-160mm.Easy to measure, and with high accuracy, which is 0.01.
  • The inner diameter dial gauge kit is equipped with a portable case, which can be put in the case after using, and is not easy to be lost..
Check Stock

Telescoping Gage Set, 6Pcs Precision Telescopic Gauge 8-150mm Adjustable Inner Diameter Gauge Micrometer Measuring Tools T-Bore Hole Gauge

  • ...ick checking of holes, slots and recess up to 6 inch deep. The ends of both contact are head treated steel and precision ground to a radius allowing proper clearance on the smallest hole the gauge will enter..
  • 【Bore Gauge Material】 The bore gauges are made of carbon steel with chrome plating on the surface. Self centering telescoping gauge has high rigidity, good wear resistance. Telescoping Gage Set has nickel-plated finished and good side arc so that the product has a long service life..
  • 【Bore Gage Packing】 Total 6Pcs cylinder bore gauges in a ethylene plastic bag, range: 5/16" - 6" (8mm to 150mm), (1 gage: 5/16 - 1/2" range x 4.20" overall.
  • 1 gage: 1/2 - 3/4" range x 4.40" overall.
  • 1 gage: 3/4 - 1-1/4" range x 4.40" overall.
  • 1 gage: 1-1/4 - 2-1/8" range x 5.85" overall.
  • 1 gage: 2-1/8 - 3-1/2" range x 5.85" overall.
  • 1 gage: 3-1/2 - 6" range x 5.85" overall)..
  • 【Scope of Application】 Telescopic spring piston in the hole (or groove), can conduct inner diameter detection, used with micrometer or caliper, with knurled locking device..
  • 【Unique Design】 The spring tension of bore measuring tool ​gives uniform contact pressure, can detect the inner diameter in a hole (or groove).Spring of telescopic gauge loads with knurled locking knob and kn....
Check Stock

CARL Heavy Duty Paper Punch 3 Hole, 300 sheet

  • High-strength "samurai steel" hollow-core punch head technology requires less force.
  • Adjustable margin depth selector and centering guides.
  • large-capacity waste tray, Heavy-gauge steel..
  • Built-in paper guide for perfect positioning.
  • Limited lifetime warranty - excluding punch heads and disks.
  • Punch heads available in 9/32-inch diameter and 11/32-inch diameter.
  • Check the punch heads frequently and replace them when they were over used (Punch heads also separately available in Replacement Punch head kit).
Check Stock

TEKTON 3/16 Inch Alignment Punch | Made in USA | 66175

  • Gradually tapered, self-centering nose aligns holes in multiple parts, positioning them for accurate assembly.
  • Straight and true, tip and taper are precisely machined to meet exacting tolerances.
  • Individual heat treatment allows careful control of tip hardness and temper of striking end.
  • Classic natural finish has a dry-touch, rust-preventative coating.
Check Stock

TEKTON 1/16 Inch Roll Pin Punch | 66061, 1/16 in.

  • Reverse taper shaft with self-centering guide ball tip drives out or inserts hollow pins without deforming them or sticking in workpiece.
  • Straight and true, tip is precisely machined to meet exacting tolerances.
  • Individual heat treatment allows careful control of tip hardness and temper of striking end.
  • Classic natural finish has a dry-touch, rust-preventative coating.
Check Stock

VR Mat - ProxiMat ® Metaverse Portal 42' - X-Large Mat for Virtual Reality - Play with Both Feet on The Mat

  • PLAY ON THE MAT: The large 42 inch size allows you to play with both feet on the mat. Why step on and off the mat when you can stay within your improved Safety Zone. US Patent #10,350,488.
  • MINIMIZES ACCIDENTS: Improves VR game play by defining your play area and keeping you within a zone away from objects or walls. Using a tactile approach for your feet provides an extra level of safety and keeps you far enough from your guardian systems warnings and allows you to focus on your game and not the flashing boundary..
  • KEEPS YOU CENTERED: Physical home centering button along with smaller north facing button provides a true physical presence while in Virtual Reality. Keeping you centered is key to great gaming..
  • USE ALMOST ANYWHERe: At home, school, hotels, dorm rooms, VR arcades- any use that requires standing or room scale..
  • USE WITH ALL VR SYSTEMS: Not limited to any one VR system! Provides all Virtual reality systems (with standing & room scale movement games) the benefit of centering, room awareness, direction, increased safety for longer & better game play..
Check Stock

Neoteck Digital Indicator Bore Gauges, 2\-6\/0.0005\ Deep Engine Cylinder Measurement

  • Super Precision Deep Measuring Bore Gauge - Two-point contact is used to detect geometric diameter measurement problems such as ovality and taper.
  • Professional Quality - Self-centering measuring extended heads, chrome plated handle and good quality ABS storage case.
  • Zero Setting before using- Before measuring, be sure to adjust the pointer of the digital dial indicator to the “0” setting and select the measuring head of the appropriate size for measurement.
  • Digital Dial Indicator - Range: 0 ~ 12.7 MM (0 ~ 0.5 inch).
Check Stock

Haden Dorset Wide Slot Stainless Steel 2 Slice Retro Toaster & Dorset 1.7 Liter Stainless Steel Electric Water Kettle

  • Bundle includes Haden Dorset retro toaster and Haden Dorset electric kettle.
  • 2-slice retro toaster with extra-wide slots that are perfect for toast, bagels, and more.
  • Operates with a self-centering function and removable crumb tray for easy cleanup after use.
  • 1.7-liter stainless steel electric tea kettle perfect for boiling tea and general kitchen use.
  • Designed with a 360-degree base, water gauge, removable filter, and auto shut-off for maximum convenience.
Check Stock

VR Streaming Link Cable Compatible for Oculus Quest, Cuxnoo Virtual Reality Headset Cable Angle USB 3.2 Gen1 C-C High-Speed Data Transfer, Fast Charging Cord, 15FT

  • SUPER SOFT: Constructed with anti-fatigue memory foam that is soft enough to make an impression. This comfortable foam allows for many hours of uninterrupted gameplay without tiring. US Patent #10,350,488.
  • MINIMIZES ACCIDENTS: Improves VR game play by defining your play area and keeping you within a safer zone away from objects or walls. Using a tactile approach for your feet provides an extra level of safety and keeps you far enough from your guardian systems warnings and allows you to focus on your game and not the flashing boundary..
  • KEEPS YOU CENTERED: Physical home centering button along with formed ridges give you a true physical presence while in Virtual Reality. Keeping you centered is key to great gaming..
  • USE ALMOST ANYWHERe: At home, school, hotels, dorm rooms, VR arcades- any use that requires standing or room scale..
  • USE WITH ALL VR SYSTEMS: Not limited to any one VR system! Provides all Virtual reality systems (with standing & room scale movement games) the benefit of centering, room awareness, direction, increased safety for longer & better game play..
Check Stock