Top Tube Butt Welding Machine

Strong Hand Tools CPL45 , Pipe Fit-Up Clamp, Pipe Welding Alignment Tools (Pipe Diameter Capacity: 2″ ~ 4″ (50~100 mm))

  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding. Easy-to-use design for the rapid, repeated loading and unloading of work pieces..
  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding..
  • Easy-to-Use design for the rapid, repeated loading and unloading of workpieces..
Check Stock

ANDELI Cold Welding Machine 110V/220V TIG-250MPL TIG Welder MOS Tube Multifunctional With Hot/Cold/TIG Pulse Cold TIG Welding Machine

  • 【Multifunctional tig welder】MOS Tube Multifunctional With Hot/Cold/TIG Pulse Cold TIG Welding Machine,the welding speed is fast, the welding....
  • 【Cold welder】The core cold welding technology,exquisite weld bead, the welding point temperature is low, the deformation is small, the color of....
  • 【Delivery Package】110/220V TIG-250MPL, ground clamp 2m, COLD torch WP-9F 4m, TIG torch WP-17F 4m, gas pipe 3m, nozzle*20, collet*20, house....
  • 【Intelligent adjustment】Screen Digital intelligent display,storage store the welding parameters,parameter capable for adjustment when welding.
  • 【Applicable Material】Ordinary thin steel, carbon steel, stainless steel, iron and etc. Suitable for homehold DIY and general maintenance work..
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

  • 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
  • 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
  • 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials..
  • 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to make sure a firm fixation.
  • Use all 16 clamps for larger projects, then perform joint welding between them..
  • 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
  • meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check Stock

Welder Cooling Water Tank for TIG Tig Cooler 10L Tig Water Cooler 110V Water Cooled Tig Water Cooler TIG MIG Welder Torch Water Cooling System

  • TYPE: New Update (more powerful motor) 10L Cooling Water Tank CT-10 (Size: 470*285*360mm.
  • 135W WATER PUMP: This cooling criculating tank is installed with no-sealing magnetic pump, helps to avoid limescale and protect it from burning by scale blocking. fast heat dissipation, with 135W high-power motor, it is more durable and powerful..
  • COPPER CONDENSING TUBE: The copper tube cooling system combined with the powerful fan keeps the water at normal temperature for better heat dissipation. It is corrosion-resistant and anti-aging..
  • WATER LEVEL DISPLAY: Keep you abreast of the water level and the water tank is large enough. In the absence of water supply pipes in the wild, it can meet the needs of different argon arc welding machines..
  • WIDE APPLICATION: Widely used in high-power argon arc welding machine torch cooling, plasma cutting machine torch cooling industrial welding equipment supporting the use.10L large capacity provides efficiency when work in no-water-supply environment..
Check Stock

90°Right Angle Clamp Adjustable Wood Metal Vice Corner Miter Vise Tool for Woodworking Engineering Welding Carpenter Photo Framing

  • The Upgrade Steel Rotating Nut, Wear Resistance, Not Easy to Screwloose.
  • Electroplating Screw, More Durable, Not Easy to Rust..
  • For welding perfect 90-Degree corners on square tube, round tube and angle and channel iron..
  • Swing Jaw Design, Single Handle Jaw Two-way Rotation can be Adjusted, Precision Right Angle Clamping Tool..
  • Handle Using TPR Rubber Coating Design, Anti- skid, High Strength.
  • Perfect for welding, framing, drilling, doweling, making cabinet, installing furniture, frame and aquarium, etc..
  • Slots in base plate so you can fix the vice to a work bench or machine table..
Check Stock

HUGEWELD Tig Welder TIG-200,HF TIG/Stick/Arc 2 in 1 TIG Welders,200 Amp 220V TIG Welding Machine,IGBT Inverter Portable Digital Display for Beginner

  • ✅【2 in 1 HF START】TIG200 is high frequency(HF) ignition, stable arc,simple to operate. The conversion efficiency of the whole machine is increased by more than 30%..
  • ✅【IGBT INVERTER】Use the single tube IGBT (the inverter frequency can reach 25-50KHz) to convert 50/60Hz to dc and then to high frequency and lower voltage,portable only 12.54 lbs, 13x6.3x11.4" size !.
  • ✅【2T & 4T 】2T(Manual) / 4T(Semi-auto) switch is available, you can release your finger for long time welding job when on 4T. 2T is suitable for the re-tack welding, transient welding or thin plate welding. 4T is suitable for welding medium thickness plates..
  • ✅【SAFETY and ENERGY SAVING】Automatic Compensation with Voltage Fluctuation, Over-voltage protection, Under Voltage Protection, Over Current Protection, Over Load Protection,Fan dormancy..
  • ✅【EXCELLENT WELDING PERFORMANCE】 Tig welding thickness 0.5-5.0mm under 10-200A output.
  • application of tungsten electrodes diameter: 1.0/1.6/2.0/2.4/3.0mm. Suitable for welding different metals such as steel, stainless steel, carbon steel etc. (Can’t weld aluminum). ARC welding thickness 2.0-8.0mm under 20-150A current , application of electrodes diameter: 2.5/3.2mm..
Check Stock

Forney 32110 E7014 Welding Rod, 1/8-Inch, 10-Pound

  • All position welding rod with digging arc, deep penetration on dirty, rusty and painted materials.
  • Ideal for joints requiring deep penetration such as square edge butt welds, good for vertical and overhead welding with light slag.
  • Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications, plus pipe welding.
Check Stock

TOOLIOM Aluminum MIG Welder 250A 110V/220V Dual Voltage MIG/Lift TIG/Stick 3 in 1 Welding Machine

  • Multi-functions in one machine, suitable for Gas MIG/Flux MIG/Stick/ Lift TIG..
  • Can weld aluminum ,compatible with a spool gun or MIG torch with graphite wire feed tube..
  • MIG synergistic setting & MIG manual setting, good choice for both novice and professional..
  • Can be used with various welding wire, .040" solid/flux/aluminum wire,035" solid/flux wire,030"solid/flux wire,024" solid wire..
  • Dual voltage input design: Welding machine can be plugged into 110/220V dual voltage (Automatic fitting)..
Check Stock

Forney 32005 E7014 Welding Rod, 3/32-Inch, 5-Pound

  • All position welding rod with digging arc, deep penetration on dirty, rusty and painted materials.
  • Ideal for joints requiring deep penetration such as square edge butt welds, good for vertical and overhead welding with light slag.
  • Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications, plus pipe welding.
Check Stock

Pure Nickel Strip- 99.6% Nickel for 18650 Soldering Tab for High Capacity Lithium, Li-Po Battery, NiMh and NiCd Battery Pack Battery and Spot Welding, a U.S. Solid Product (0.2x8x100mm, 100pcs)

  • ✅【High Quality & Multifunctional】：This adjustable spot welding tool is made of aluminum alloy material, with anodic oxidation surface, wear resistant and beautiful, fire-proof and anti-fall. 2mm Thickened pure copper strip and imported MOS tube can save energy and can provides longger service time. The welding machine itself has overcurrent protection, low voltage protection, overvoltage protection, and overtemperature protection. Intelligent output current. Can guarantee safe use..
  • ✅【Quick Input & 9 Gears Adjustable】：This spot welding equipment adopts Type-c interface, 4 hours fully charge under 5V 1A input. Built-in high-rate polymer power cell, the maximum output current is up to 650A, and it can continuously weld thousands of points after being fully charged. 9 gears of output power adjustable, 1gear(lowest) and 9gear(highest)..
  • ✅【With Charging Control Module & Indicator Light】:With output power and remaining power indication, there are two output modes: 1.5s timing trigger output and automatic detect welding pen output. ---This spot welding kits tools has 4 dual-color indicator lights, the power indicator flashes when charging.When all four lights are on, it is fully charged.It will automatically shut-down after 15 minutes of....
Check Stock

Vangoa Bb Trumpet Standard Brass Silver Trumpet for Beginners Students with Hard Case, Stand, 7C Mouthpiece, Gloves, Valve Oil and Cleaning Kit

  • ✔[Brighter Tone] The standard trumpet adopts advanced integrated tube design, rapid spring rebound and good air tightness, make the sound pure and bright, rich and strong penetrating. Perfectly suited for beginners and students.
  • ✔[Excellent Design] 123mm caliber big horn design, 1st valve slide thumb saddle and 3rd valve slide with adjustable throw ring. No need to worry about getting stuck during performance. It is precisely applicable to a very wide of repertoire.
  • ✔[Attractive appearance] Using silver wire welding instead of lead wire welding, toxic-free and environmentally friendly. The highly polished tuning tube makes the tube of the trumpet has high reflectivity and a delicate appearance.
  • ✔[Precision Piston] The higher precision piston is processed by CNC machine tools, better air tightness and better sound effects. Made of stainless steel, which has flexible sliding, strong wear resistance and long service life.
  • ✔[Double Waterkey] Exclusively designed unique valve system, double water key design makes it smooth and durable when playing and more convenient to clean the pipe body stains.
Check Stock