Top Tube Profile Bending

Antstone 1/4” 3/8” 1/2” O.D. Tubing Bender 3 in 1 Tube Bender 180° HVAC Copper Aluminum Tubes Bending Tool for Air Conditioning Refrigeration Repair

  • [Parameters] - Application: only for soft copper / aluminum tubes.
  • applicable tube outer diameter: 1/4"、3/8"、1/2".
  • applicable wall thickness: 0.027”-0.059”(0.7mm-1.5mm).
  • bending radius: 0.82”, 1.14”, 1.43”(21mm, 29mm, 36.5mm).
  • [3-in-1 Design] - The tube bender is a 3 in 1 tool and will fit 1/4", 3/8", 1/2" outside diameter tubes..
  • [High Quality] - High-quality alloy aluminum body, which is lightweight and durable. (NOTE: if the tube wall thickness < 0.059”, it may be damaged.).
  • [Professional Design] - (1)Aluminum alloy material makes it light and portable.(2)The soft rubber handle provides a comfortable grip..
  • [Wide Application] - This tubing bender is widely used for HVAC, refrigerators, automobiles, hydraulic and pneumatic systems maintenance, etc..
Check Stock

Bonvoisin 3/8 1/2 OD Tubing Bender 2 in 1 Manual Pipe Bender 180° HVAC Soft Copper Aluminum Pipe Bending Tool for Air Conditioning Refrigeration Repair

  • [Parameters] - Application: only for copper / aluminum pipes.
  • [High Quality] - The tube bender is forged from high-quality carbon steel, which is light and durable.(NOTE: if the pipe wall thickness.
  • [2-in-1] - This tubing bender tool is a 2 in 1 tool and will fit 3/8’’、1/2’’ tubes, which is convenient for different size tube bending and....
  • [Humanized Design] - (1)The manual pipe bender uses the principle of leverage, with which you can easily bend the pipe. (2)The round hole of the upper....
  • [Wide Applications] - This pipe bender is suitable for HVAC, air conditioning, and refrigerator pipe repairs..
Check Stock

RIDGID 36117 403 Instrument Bender, 3/16-inch Tube Bender for Bends Up to 180 Degrees, Pipe Bender,Black/Silver,Small

  • Designed for bending annealed copper, steel and stainless with a wall thickness less than or equal to 0.06 inches (1.5 mm) to a maximum of 180 degrees.
  • Made with offset cushion grip handles for improved comfort when forming 180-degree bends.
  • A 90-degree start angle and unique oil-absorbing shoe minimizes bending effort while forming accurate bends.
  • Features measurements in both inches and millimeters.
  • Tube bender has a 3/16-inch tube size outside diameter capacity and 5/8-inch bend radius.
Check Stock

WISPAUSU HVAC 90 Degree Pipe Bender Set ST-R999 Ratcheting Pipe Tubing Bender Hand Tool with 1/4 to 7/8 Inch Pipe Bender Heads

  • WHY NEED IT -- The professional pipe bender kit can help you to bend the metal pipe easily, and the bending angle can reach 90 degrees. This pipe bender is powerful and has reverse pipe bending function. It is made of high-quality carbon steel and aluminum alloy, which is strong and durable. It is very helpful for your pipe bending work..
  • 7 PIPE BENDER HEADS -- Equipped with 7 sizes of pipe bender heads, suitable for 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8", pipe benders The head can be replaced to meet more needs..
  • HIGH QUALITY -- The ergonomic thick handle design is comfortable and safe to use. It will not be injured or risky during work. It is very suitable for one-handed operation and will not be tired after long hours of work..
  • EASY TO USE -- Place the metal tube between the cross bar and the mandrel. Pull the ratchet handle and the pump rod until the required angle is reached, up to 90 degrees. Then press the release trigger above the lever to retract the mandrel and release the metal tube easily without causing damage to the tube..
  • WHAT YOU GET -- The tool kit includes 1PCS Pipe Bender, 7PCS Pipe Bender Heads, 2PCS Fixed Supports, 1PCS Deburring Tool and User Manual. All tools are stored in a plastic case, neatly placed to protect the tools an....
Check Stock

Mophorn Pipe Tube Bender 3/8 to 1 Manual Tube Bender with 7 Dies Heavy Duty Tube Bender Tubing of Steel Metal Copper Ideal for Repair Shops

  • 3/8"-1" Bending Range: The bender can easily and smoothly bend less than 0.08 inch/2 mm thickness iron pipe. And the tool is suitable for....
  • 7 Superior Steel Dies: We provide 7 tube bender dies, size ranging 3/8", 1/2", 9/16", 5/8", 3/4", 7/8", 1". The bending formers can meet different....
  • Carbon Steel Material: Made of strong steel material, our bending tool performs well in bending hard materials. High strength steel aims for a long....
  • Compact & Portable Design: Compact design allows easy carrying, lightweight but gives enough bending force. The metal bender adopts a long handle with....
  • Universal Usage: A multifunctional steel bender machine is suitable for grids, gates, balcony railing, patio furniture, and steel materials. Widely....
Check Stock

TINTON LIFE Telescoping Document Tube 30.55\-51.97\ Expanding Poster Carrier Transports & Stores with Adjustable Gallusus

  • Expandable Poster Tube：The storage tube could expand from 17.7" up to 28.4" and the diameter is 2.56”,includes an adjustable carrying strap..
  • Poster Transport Tube with Unique Lock Design：Twist it according to the arrow direction,can easily and firmly lock , rendering the tube almost completely water and light resistan,your favorite poster in the tube case safely..
  • Strong and Lightweight Telescoping Drawing Tube: Poster Tube is made of rigid plastic to your posters, artwork, and documents from bending or creasing in transit..
  • Unlimited Uses DocumenT Storage Tube： The plastic tube could be used to storage and travel posters, blue prints, maps, documents, large photo prints, drawings, artwork, arrows, fishing rods and more..
  • Perfectly suited for for artists, illustrators, architects or hobbyists. Ideal for storing paper, mayfair, tracing paper, canvases and posters. Also great for transporting drum sticks, arrows or other sporting gear..
Check Stock

Hilmor Reverse Bending Attachment - HVAC Tool Tube Bender, Black, CBRBM 1890999

  • BENDER ATTACHMENT: Attach this two piece reverse bender to the Hilmor Compact Bender 1926598 (sold separately).
  • POWERFUL AND COMPACT: Bending soft metal pipes and tubing has never been easier. The proprietary design allows it to fit where others can't, while not compromising on the capability or quality of the resulting bend.
  • EASY TO SETUP: Place universal crossbar and desired color-coded mandrel on handle, snap into place, click pumping lever into ready position, and place tubing between bar and mandrel.
  • ONE-HANDED OPERATION: The ratcheting mechanism and innovative release lever allow for bending with one hand. Pump lever until desired angle is achieved, up to 90degrees. Simply press release trigger above lever to retract mandrel for easy tube release, ensuring no damage to the metal.
  • TUBE SPECIFICATIONS: Bends 1/4” to 7/8”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4” and 7/8” Tubing made of soft metals like copper, steel, aluminum, brass.
Check Stock

ATNHYING Automotive Tubing Bender Brake Line Bending Tool Brass Tube Bender Pliers for 3/16 Inch 1/4 Inch,for Brake Fuel Line

  • Size: Can be used for copper pipes with diameters of 3/16 and 1/4 inches..
  • Function: Tube bending pliers are used to bend copper pipes in brakes, brake systems, and fuel lines..
  • Features: The unique bending design makes it easier and more convenient to straighten, bend and adjust the copper pipe in the line.It can greatly reduce the damage to the copper pipe, and greatly reduce the difficulty and strength of the operator's work..
  • Quality: The tube bender pliers adopts forging technology and heavy-duty structure which is durable..
  • Handle: Rubber handle, ergonomic design. Comfortable to hold and non-slip..
Check Stock

Vividia D3160 USB Digital 180 Degree One-Way Articulating Borescope with 5.9mm Diameter 1 Meter Long Camera Probe

  • Vividia D3160 USB Digital One-Way Articulating Borescope has 5.9mm diameter camera probe and 1 meter long insertion tube (one-way articulation, 5.9mm diameter and 1 meter long, USB borescopes endoscope)..
  • D3160 can only be bent in one direction, and the maximum bending angle is 180 degree..
  • The insertion tube has metal braided outside layers and the bending part is also made with stainless steel, which offers good abrasion resistance..
  • With USB connection, one can connect Vividia D3160 Digital Borescope to a Windows PC (WIndows XP, 7, 8 and 10), MacBook, some android devices (phone or tablet) directly..
  • End users can easily take pictures and videos with free software or app. The LED brightness can be adjusted..
Check Stock

7 Size Pipe Threader Threading 3/8 to 2 Die Dies Set w/ Handle Ratchet

  • 7 exchangeable tube bender aluminum former: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8".
  • The package include with a pipe cutter that with spare blade.
  • The tubing bender is a professional tool for commercial or occasional use to change bending mandrels quickly..
Check Stock

NW Golf Ball Picker Shag Tube - Plastic with Ball Release Retrievers Collector Grabber Picker Pick Up Sucker Tool (Black)

  • EASY TO USE It adopts slotted tube design, which can remove dirt. The tube mouth only needs to aim at the ball and press hard, and the ball will enter the tube..
  • CONVINIENT The pipe is long enough to pick up the ball without bending. The tube has holes to see the quantity..
  • SAVE EFFORT Provide much convenience in playing golf ball, saving effort and saving time..
  • Lightweight and durable Ball Pick Up Tube .Foot activated ball release allows for easy ball placement..
  • Can hold up to 21 golf balls.Simple and easy to pick golf balls..
Check Stock

Hilmor 1839032 CBK Compact Bender Kit, 1/4" To 7/8" - HVAC Tools and Equipment for Tube and Pipe Bending, Black

  • POWERFUL AND COMPACT: Bending soft metal pipes and tubing has never been easier. The proprietary design allows it to fit where others can't, while not compromising on the capability or quality of bend being delivered..
  • EASY TO SETUP: Place desired crossbar and mandrel on handle, snap into place, click pumping lever into ready position, and place tubing between bar and mandrel..
  • TO USE: The racheting mechanism and innovative release lever allow for bending with one hand. Pump lever until desired angle is achieved, up to 90degrees. Simply press release trigger above lever to retract mandrel for easy tube release, ensuring no damage to the metal..
  • TUBE SIZES: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7"8..
  • INCLUDES: Bender body, crossbar and mandrels for 1/4" to 7/8"..
Check Stock