Top Tube in tube Heat Exchanger

DOEL 19000 BTU Swimming Pool Heat Pump for In-ground/Above-Ground Pools 5.56 kW Electric Pool Heater with Titanium Heat Exchanger 220-240V 60Hz

  • Swimming Pool Heat Pump: This electric pool heater is suitable for small above-ground pools up to 6600 gallons and in-ground pools up to 4,226 gallons. (Please read item description for more details as reference). It's your perfect heat pump solution for above ground and inground swimming pools with 2 inch/50mm water hose connection..
  • Efficiency and Easy to Installation: Allowing fast and easy hookup without professional installation. With innovative flat-tube titanium heat exchanger, the heat exchanging efficiency is 30% higher than spiral tubes..
  • Unique Design: Efficient rotary compressor and low-noise fan guarantee extremely quiet operation. Galvanized steel body panels with cute and graceful design are impervious to rust and deterioration. The setting water temperature is available on digital LED display..
  • Premium Security: Available with child lock. Advanced protection system with auto electrical-leakage and low-voltage switch, high and low-temperature, and compressor discharge over-high protection..
  • Working Requirements: 220-240 volts, 60 HZ for USA electricity. Built in 11.5 foot long power cable with standard USA plug, if there is any cofused about the plug, please contact us in time. We will always here to help you...
Check Stock

Corsair Hydro X Series, XR5 120mm Water Cooling Radiator (Single 120mm Fan Mount, Easy Installation, Premium Copper Construction, Polyurethane Coating, Integrated Fan Screw Guides) Black

  • 120mm fan mounts on either side of the 120mm radiator are ready for your most ambitious custom Liquid Cooling build, with 14 tube, such a PC heat exchanger is the ability to keep CPU stability and smoothness..
  • 28mm/11inch liquid radiator thickness delivers extreme cooling performance with high-airflow and low-noise fans..
  • Material: Engineered with copper fin and brass water chamber that increase the durability and strength of the water cooling radiator while reducing the weight.
  • Optimized Heat Transfer: Optimized for efficiently pulling heat away from cycling coolant thus achieving maximum heat dissipation at both low and high airflow operation.
  • The 120mm radiator using the black oxidation paint to increase the thermal efficiency.
Check Stock

10 Pack Bundle HDM Heat/Moisture Exchanger (HME) Inline Humidification Solution Unit for CPAP Masks

  • Universal: Nispira HME filter is an inline humidification solution unit for use with ALL CPAP & BiPAP Machines and CPAP Masks..
  • Easy to Install: To install a Heat Moisture Exchanger for therapeutic use, connect the large diameter end (25 mm) of the HME to your mask and the smaller diameter end (22 mm) to your CPAP tube. Be sure both connections are full seated and secure. Your HME is now ready for use.
  • Replacement: HME Filters should be changed about once a week for best results..
  • Storage: When not in use HMEs should be stored a sealed plastic bag (i.e. a ZipLock). The HME will immediately begin to collect moisture and humidity when exposed to air..
  • A pack of 24 filters included. Quality meets or exceeds leading national brand.
Check Stock

villastar Mini Swimming Pool Heat Pump for Above-Ground Pools 16036 BTU Electric Pool Heater with Titanium Heat Exchanger 110V 60Hz

  • ...t and deterioration. The setting water temperature is available on the digital LED display. Let the temperature display be more intuitive, and allow for simple and quick control of settings..
  • High Efficiency - Allowing fast and easy hookup without professional installation. With an innovative flat-tube titanium heat exchanger, the heat exchanging efficiency is 30% higher than spiral tubes. The compressors have obvious advantages in terms of operating heating efficiency throughout the year, especially the heating performance in winter..
  • Premium Security - Available with child lock. Advanced protection system with auto electrical leakage and low-voltage switch, high and low-temperature, and compressor discharge over-high protection. If you have any questions, please feel free to contact us. We are sincerely willing to provide you with the best service..
Check Stock

VIVOSUN 1/4HP Active Aquarium Chiller Ultrahigh Refrigeration Efficiency for Both Freshwater and Seawater

  • SMART TEMPERATURE CONTROL: Precise, automated temperature control with easy-to-read LED screen, single-chip microcomputer temperature control system and built-in RAM memory CMOS chip.
  • POWERFUL AND RELIABLE MOTOR: The 1/4 HP motor easily maintains the perfect temperature in your hydroponic reservoir or aquarium.
  • specs: 115V, 50/60 Hz, uses R-134A (Freon-free!).
  • OPTIMIZED DESIGN FOR FRESH OR SALT WATER: VIVOSUN’ s pure titanium heat-exchanger delivers quick refrigeration.
  • and its top-grade materials don’t corrode when cooling seawater.
  • COMES WITH FITTINGS(in &out) : This compact features convenient dimensions: 15″L x 10″W x 17″H.
  • and comes with the following tube fittings 3 different sized hoses: 1/2″(2pcs), 3/5″(2pcs) & 3/4″(2pcs).
  • ULTRA-HIGH EFFICIENCY REFRIGERATION &ENERGY SAVING: super-silent compressor,cools up to 660 gallons (2,500 liters) per hour quietly and with optimal energy efficiency.
  • recommended water volume 26-158 gal/100-600 liters.
Check Stock

MECCANIXITY Battery Wrap PVC Heat Shrink Tubing 150mm Flat 1.5m Blue Good Insulation for Battery Pack

  • PVC heat shrink wrap tube can be used for big battery or battery pack protection, such as 18650, 21700, AA, AAA battery packs. Battery wraps can be....
  • The PVC heat shrink wrap tube is in size of: 150mm(6-inch) flat width, 1.5m total length, -40°C to +105°C(-40°F to +221°F) temperature range,....
  • Battery wrap tube is with good insulation, can not only wrap and protect the battery pack, prevent dust for the battery pack, but also beautify the....
  • Steps of intallation:1.Prepare heat shrink tube, cut it to the length you want.
  • Notice: Hot air gun is usually used as heating tool. When using the hot air gun to heat, pay attention to move back and forth to make the heat shrink....
Check Stock

OBPFY OBPSFY Car Air Conditioning Orifice Tube Removal Tool，A/C Orifice Tube Remover/installerr

  • ?Orifice Tube Remover? x Car air conditioning orifice tube removal tool,for remove and install orifice tubes,auger for removing broken Orifice tubes,simply turn into Orifice tube for grip, Use the nut to apply even and steady pressure so you don’t damage the small plastic ears on the orifice tube,then remove Orifice tube.Professional tools will make replacement and maintenance easier.Fits many GM..
  • ?Material? x Orifice Tube Removal Tool is made of high quality metal,sturdy and durable, can be used for a long time..
  • ?Easy to use? x This tools slides in and locks on to tabs on the orifice with a slight twist,then able to pull / rotate the old orifice until it could get out.It saves time trying to weasel a pair of needle nose pliers into a small area to pull out the old orifice tube.No worries about snapping off the end with pliers..
  • ?Tip? x Sometimes you have to add a little bit of heat on the pipe to make the other fees to loosen up a little bit because otherwise sometimes for the brakes and it's going to be more hot to take it out so it's better to apply some heat the heat down and then start pulling..
  • ?Package? x 1 X Car Air Conditioning Orifice Tube Removal Tool.
Check Stock

BestEquip Heat Exchanger 3'x7.5' 60 Plates Brazed Plate Heat Exchanger 316L 1/2' BSP FPT Heat Exchanger EATB12 Beer Wort Chiller for Hydronic Heating

  • High Thermal Efficiency: Turbulent-flow design moves the two media in opposite directions and creates strong turbulences for superior heat transfer rates and efficiency. Our heat exchanger series have been certificated by CE..
  • Energy Optimized: This heat exchanger stainless can heat water to the preset temperature, which is super energy-saving with no electricity consumption and no oxygen consumption..
  • Robust Construction: This 60 plate heat exchanger features 316L stainless steel sheets, which are brazed together at the edges and the matrix of contact points for a reliable and rugged part to form a durable, integral piece that can withstand high pressure and temperature. Four thickened BSP FPT ports for your easier installation..
  • Compact Design: Corrugated plate design of this plate chiller wort allows for substantially smaller build and footprint at an equivalent or better performance compared to other heat transfer devices – resulting in significant space savings..
  • Highly Versatile: This heat exchanger beer offers the highest level of thermal efficiency and durability in a compact &lightweight unit, ideal for industrial oil cooling, refrigerant evaporators, and condensers, residential and light commercial HVAC hydronic systems..
Check Stock

3Pcs 14mm OD Hard Rigid Tube Bender Mould Tool Kit, Rigid Tubing 45/90/180 Degree Bending Kit, Acrylic Bending Jig Set, Hard Pipe Bend Die Tube Tool Suitable for Water Cooling System

  • 【Bender Mould】3Pcs Hard Rigid Tube Bender Mould Kit is mainly used for angle setting. Heat the hard tube to a certain degree, then place the tube on the grinding tool at different angles to shape it, and the required angle can be bent.
  • 【Wide Application】Hard tube/Acrylic tube bending tool set. Multi-angle acrylic bending mould for AWGM3 series, each group with a total of three. 45/90/180 curvature, suitable for 14mm rigid tubes.
  • 【High Quality】 The tube bender is made of ABS plastic material, the angle of the positioning groove is precise, and the molds are mirror polished to ensure the best contact effect between the finished product and the tube body.
  • 【Bending Tool】It is convenient and simple, a good helper for hot folding. The bending kit is an ideal tool for professionals and beginners, measuring / cutting / heating / bending. Need enough heat to bend (such as a heat gun).
  • 【Note】This bending mould set is suitable for 14mm rigid tube, please check it before use. The heat gun must be used in a ventilated place, wear protective gloves and goggles. If you have any questions, please contact us.
Check Stock

BestEquip Heat Exchanger 3 x7.5 30 Plates Brazed Plate Heat Exchanger 316L 3/4 MPT Heat Exchanger B12-30 Beer Wort Chiller for Hydronic Heating

  • 【HIGH THERMAL EFFICIENCY】- Turbulent-flow design moves the two media in opposite directions and creates strong turbulences for superior heat transfer rates and efficiency. Our heat exchanger series have been certificated by CE. Dimension: 7.8" x 3" x 3.7" / 20 cm x 7.8 cm x 9.5 cm..
  • 【ENERGY OPTIMIZED】 - This heat exchanger stainless can heat water to the preset temperature, which is super energy-saving with no electricity consumption and no oxygen consumption..
  • 【ROBUST CONSTRUCTION】- This 30 plate heat exchanger features 316L stainless steel sheets, which are brazed together at the edges and the matrix of contact points for a reliable and rugged part to form a durable, integral piece that can withstand high pressure and temperature. Four thickened MNPT ports for your easier installation..
  • 【COMPACT DESIGN】- Corrugated plate design of this plate chiller wort allows for substantially smaller build and footprint at an equivalent or better performance compared to other heat transfer devices – resulting in significant space savings..
  • 【HIGHLY VERSATILE】-This heat exchanger beer offers the highest level of thermal efficiency and durability in a compact & lightweight unit, ideal for industrial oil cooling, refrigerant evaporators, and co....
Check Stock

Aonomi Compatible Industrial Heat Shrink Tube Labels Replacement for DYMO 18053 Fit with DYMO Rhino 4200 5200 5000 6000 Industrial Label Maker Black on White 3/8 x 4.9 ,10-Pack

  • Compatible with DYMO Rhino Pro 1000, 3000, 4200, 5000, 5200, 6000, ILP-219, 3M PL100, PL200, PL300 and Tyco T107M label makers..
  • Size of Each Tape: 3/8 inch (9mm) wide, 4.9 feet (1.5m) long. The size indication for this Heat-Shrink Tube is the width of the flattened tube as a....
  • Made of industrial grade polyolefin offers a 3:1 heat shrink ratio make sure to fit on wires or cables and make heat-shrink tube labels indispensable....
  • Heat shrink tube offers an excellent method of labeling wires and cables: Fantastic custom heat shrink solution, print legibly and shrink up perfectly....
  • All heat-shrink tube labels offer the convenience of printing directly on the tubing itself with any Industrial labeling tool for high-end cable....
Check Stock

Eastern Bikes BMX Eastern Grim Reaper Frame Black 21

  • Helix down tube, top tube & chain stays: ribs inside the tubing help prevent denting and yield a higher strength-to-weight ratio.
  • Classic EB cut-out in the head tube and reinforced cutouts in seat tube .
  • Offset butted and heat-treated head tube.
Check Stock