Top Tubes Ballast

RV Light Bulb LED T8 18 Florescent Tube Replacement 600 Lumen Natural White 10

  • Leisure LED 18" 10 Pack Natural/ Neutral Tubes -Must be hard wired bypassing the old floresent light ballast. Made with SMD (Surface Mount Devices) on....
  • Caution--MUST be directly wired to the 12-30V DC Power: Disconnect Ballast & Starter if there is any! Installation Manual is attached ***DON'T BUY....
  • RV fluctuations can damage a regular LED. This bulb is specially designed to with hold a wide voltage range.
  • 60,000 hour life expectancy, Last longer than a standard incandescent bulb.
  • 600 Lumens 9 Watts, 90 High Power 3014 SWD LED - Fixture Rewiring is Easy but required: Electronic ballast has to be disconnected by qualified....
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Clear Lens, T8 T10 T12, UL - 5000K

  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes..
  • ENERGY SAVING, BRIGHT LIGHTING: Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill. These lights use only 18W to emit 2200 lumens (equivalent to 40W in fluorescent tubes), making them extra bright and energy efficient..
  • KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones. Fast, simple and secure installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • CERTIFICATIONS: This product meets strict requirements to ensure that they are safe and reliable.UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, UL - 4000K

  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes..
  • ENERGY SAVING, BRIGHT LIGHTING: Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill. These lights use only 18W to emit 2200 lumens (equivalent to 40W in fluorescent tubes), making them extra bright and energy efficient..
  • KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones. Fast, simple and secure installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • CERTIFICATIONS: This product meets strict requirements to ensure that they are safe and reliable. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
Check Stock

LightingWill LED T8 Light Tube 2FT, Daylight White 5000K, Dual-End Powered Ballast Bypass, 1000Lumens 10W (24W Equivalent Fluorescent Replacement), Clear Cover, AC85-265V Lighting Tube Fixture, 4 Pack

  • ✔ ENERGY SAVING: 10W equivalent to 24watt florescent bulbs. Cut down 60% bill of electricity, the best choice for saving power. Perfect for garage, storage area, workshop, basement, home, under cabinet, parking lot,office general lighting..
  • ✔ HIGH EFFICIENCY: 1000Lumens 10W LED tubes with clear covers, high output and less Optical energy loss.Aluminum shell provides excellent insulation..
  • ✔ SAFE AND RELIABLE: RoHS-compliant, CE and FCC certification. Each product undergoes rigorous testing and service life up to 50000 hours. Safety choice, no flickering, no UV light, no buzzing ballast, no hazardous materials..
  • ✔ EASY INSTALLATION: Please remove or by-pass the existing ballast & starter before installation. Dual-End Powered T8 LED tube light with G13 base, easily fitted in traditional fixtures, better replacement for fluorescent tube lamps..
  • ✔ WARRANTY: 1 Year warranty, LightingWill will always stand behind our products for our customers, any problem you meet with our tubes, pls contact us directly asap. (Please search Asin B0787Z9686 for Micro Radar sensor tubes, Asin B07P2CN3G5 for V-type tubes).
Check Stock

T8 LED Bulbs 4 Foot, SHOPLED 36W 6000K Cool White, Type B Tube Lights, 72W 4FT LED Light Bulb Fluorescent Replacement, Ballast Bypass, High Output, Double Ended Power, 4 Pack

  • ... LED chips 4ft LED tubes has a larger beam angle, 300 degree compared to V-shaped, single row and double row LED tubes, which can fully illuminate your room, especially perfect for LED lighting in stations, factories, garages, workshops, etc..
  • EASY to INSTALL - Please Power OFF when installing the Lights!!! Existing ballast needs to be removed or by-passed. Our T8 LED tube light bulbs are dual-end powered. Installation in 10 minutes or less! Locate the ballast, cut the hot and neutral wires then cut the socket lead wires and connect the input wires to the output wires to bypass the ballast. You can install these led tube lights anywhere on the wall or ceiling as you wish..
Check Stock

4Ft T8 LED Plug & Play Type A (25 Pack) 5000K Daylight 1800 Lumen Lamp Electronic Ballast Compatible Fluorescent Tube Light Bulb Retrofit

  • ...facturer. An excellent brand at an excellent price..
  • Easiest Installation: Changing a plug and play fluorescent tube to an LED tube is simple and convenient. This Type A Fluorescent tube replacement is designed with an internal driver that allows the tube to operate directly from the existing linear fluorescent ballast...
  • Caution: Only compatible with select Electronic ballasts, The ballast in your fixture must be an approved electronic ballast. This lamp will not work with magnetic ballasts. It only takes a minute to remove the bulbs, and unscrew the plate to see the ballast name & model number. Simply write down the name & model number of the ballast in the fixture and reference the compatibility chart provided. If you have multiple fixtures, It’s important to check the ballast in each one of your fixtures.
  • Natural Daylight Color: With a very bright 5000 Kelvin Temperature, these led tubes are great for the kitchen, laundry, office or any place that requires very crisp and natural light..
  • 5 Year Warranty.: The Warranty details can be found on the attached pictures.
  • 1800 Lumens using only 16 watts - 5000 Kelvin Daylight - Medium Bi-Pin (G13) Base - 1 Inch Diameter/48 Inch length.
Check Stock

Technical Precision Replacement for SUNPARK SL15T Ballast

  • Specifications: 120 Volts, T8 and T12 Ballast with Rapid Start Method, Minimum Starting Temperature -10 F Degrees.
  • Lamps Operated: (2/1) F32T8, (2/1) F25T8, (2/1) F40T12, (2/1) F34T12, (2/1) F30T12, (2/1) F25T12, (2/1) F20T12 Linear Tubes or (2/1) PL-T32W, (2/1) F26TBX GX24q-3, (2/1) F26DBX G24q-3, (2/1) F36BX/2G11, (2/1) F39BX/2G11, (2/1) F40BX/2G11 4-pin CFLs.
  • Disclaimer: Technical Precision recommends double-checking specifications of your lamp, fixture, device, and/or appliance as well as the dimensions of your old item before purchasing our products. This item is a Technical Precision replacement product and is manufactured by Technical Precision. If you have questions, inquiries, or feedback, please do not hesitate to contact our customer support..
Check Stock

PARMIDA 20-Pack LED T8 Hybrid Type A+B Light Tube, 4FT, 18W (40W Replacement), Clear Cover, Single-End OR Dual-End Powered, 2565LM, Works with/Without Ballast, UL-Listed - 6000K (Bright White)

  • ✔ INSTALL WITH OR WITHOUT A BALLAST. These Parmida tubes can be installed with a ballast (plug and play) or without a ballast (direct installation). 18W without ballast, 20W with a ballast. Please check Ballast compatibility before purchase. Standard international 4' T8 tube shape. T8, T10, T12 Fluorescent Tube Replacement..
  • SINGLE OR DOUBLE-ENDED CONNECTION. This tube is UL-Listed for installation with a single-ended or double-ended connection. Fast, simple and secure installation under the functionality of your choice, this Parmida tube is designed with user experience as the defining motivator..
  • KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones.
  • FULLY CERTIFIED: UL-LISTED & DLC-CERTIFIED. 5 YEAR UNLIMITED WARRANTY. This product meets strict requirements to be considered energy efficient, safe and reliable. Eligible for state and nationwide rebate programs..
  • 5 YEAR UNLIMITED WARRANTY. Parmida LED Technologies' 5 year warranty provides you with ease of mind..
Check Stock

Hyperikon T8 2 Foot LED Tube, T10 T12 25 Watt Replacement (8W), Dual Ended, Clear Lens, UL, Daylight White, 4 Pack

  • 4000 KELVIN & 144 LUMENS PER WATT – These 2ft Ballast Compatible LED tubes have a high lumen count of 1150, a wide beam angle of 120 degrees, and a life span of 45,000 Hours. Replace your old cfl, halogen or incandescent bulbs with these 2 ft LED Tubes..
  • 45,000+ HOUR LIFETIME - Spend less time and effort changing your light bulbs and switch to long lasting LED’s. Hyperikon 2ft LED light tube have a life rating of 45,000+ hours, lasting over 20 years depending on use!.
  • UL-LISTED - This product has been tested and listed by the Underwriter Laboratories’ meaning it has met their requirements and nationally recognized safety requirements. Model Number: HyperBC-2C-405, UL Number: E472253.
  • BALLAST COMPATIBLE INSTALL - Hyperikon LED hybrid tube lights are designed for the quickest and easiest plug-and-play, instant fit installations and are compatible with existing, nonmagnetic electronic ballasts..
Check Stock

PARMIDA 20-Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Clear Lens, T8 T10 T12, UL & DLC - 5000K

  • FULLY CERTIFIED. UL-LISTED & DLC-QUALIFIED..
  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • SIMPLIFIED INSTALLATION. This tube can be installed with a single-ended or double-ended connection and it can install directly into your fixture’s original shunted sockets (tombstones). This eliminates the need to retrofit your fixture with non-shunted socket (single-ended installation will require non-shunted sockets/tombstones). Fast and simple installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-house Customer Service is always here to provide you with peace of mind..
Check Stock

PARMIDA 20-Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Clear Lens, T8 T10 T12, UL & DLC - 3000K

  • FULLY CERTIFIED. UL-LISTED & DLC-QUALIFIED..
  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • SIMPLIFIED INSTALLATION. This tube can be installed with a single-ended or double-ended connection and it can install directly into your fixture’s original shunted sockets (tombstones). This eliminates the need to retrofit your fixture with non-shunted socket (single-ended installation will require non-shunted sockets/tombstones). Fast and simple installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-house Customer Service is always here to provide you with peace of mind..
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Clear Lens, T8 T10 T12, UL & DLC - 4000K

  • FULLY CERTIFIED. UL-LISTED & DLC-QUALIFIED..
  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • SIMPLIFIED INSTALLATION. This tube can be installed with a single-ended or double-ended connection and it can install directly into your fixture’s original shunted sockets (tombstones). This eliminates the need to retrofit your fixture with non-shunted socket (single-ended installation will require non-shunted sockets/tombstones). Fast and simple installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-house Customer Service is always here to provide you with peace of mind..
Check Stock