Top Tubing Fittings

Orbit DripMaster 65199 Flag Dripper, 1-Gallon Per Hour, 10-Pack

  • SIZE: For use with any 1/4" Inch tubing size - 4 to 7 mm (Can also be punched into 1/2 drip tubing)..
  • PREVENT LEAKS & BLOWOUTS: These emitters are designed with an operating pressure: up to 25 PSI. If your system is over that number blowouts and poor performance will occur..
  • DESIGN: Barb design ensures tubing will not slip out or blow off at high pressure and temperature NOTE: THE MAXIMUM RECOMMENDED AMOUNT OF FITTINGS PER ZONE AT 25PSI IS QTY.22 IF YOU EXCEED THIS AMOUNT YOU MAY HAVE INSUFFICIENT WATER PRESSURE..
  • ECO FRIENDLY: Provide water directly where you need it without any overspray!.
  • EASY TO INSTALL: Install emitters directly into the 1/2 main line or branch off with 1/4 inch tubing and connect fittings to the ends!.
Check Stock

Wostore Flaring Tool Kit for Copper Pipe HVAC

  • The kit includes 1 flaring cone, 2 flaring bars, 5 swage fittings and 1 storage case..
  • Flaring tool apply to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" O.D.tubing..
  • Swage fittings are used to 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing, a rugged and durable flaring tool, swaging tool kit.
  • Versatile tool kit in a combination tubing flaring and swaging to fit all your needs..
  • This flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel and chromed for easy operation and precision. Plastic....
Check Stock

In-Ground Sprinkler System with Hose Watering Timer

  • EVERYTHING YOU NEED: Kit contains digital timer, 6 high-efficiency sprinklers, Blu-Lock tubing and fittings, tubing cutter, and 200 lb. pressure gauge.
  • FAST AND EASY INSTALLATION: Blu-Lock has reduced required insertion force by half of traditional barb fittings, making installations faster and easier on your hands.
  • PUSH-ON QUICK-RELEASE FITTINGS: Blu-Lock quick-release collars allow for easy removal, yet the stronger the water pressure, the more the retaining rings grip the pipe to ensure against leaks.
  • ENVIRONMENTALLY FRIENDLY: Blu-Lock requires no glue or plumbers tape, protecting the environment from harmful chemicals used with traditional PVC fittings.
  • CONSERVE WATER: The timer features rain delay so you arent watering in the rain.
  • FLEXIBLE PROGRAMMING: A run time of 1-240 minutes, with intervals from every 6 hours to once every 7 days.
  • AREA COVERAGE: Ideal for medium to medium-large area coverage from 2,300-6,900 sq. ft. with average residential water pressure and flow.
  • ADJUSTABLE DISTANCE: Easy to adjust spray distance for each sprinkler from 15-25 ft. radius.
  • PART OR FULL CIRCLE: Simple to adjust from 40 to 360 degrees while the water is on or off.
  • TOOLS INCLUDED: Test water pressure before installation with the included 200 lb. gauge to ensure system....
Check Stock

EilxMag DOT Air Line Fittings Assortment, 44 Pcs Push to Connect Fittings NPT Male Thread & DOT Brass Air Brake Line Fittings Kit

  • 【Premium Material】: Our air line fittings are made of PBT Plastic, the air brake brass fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
  • 【Quantity】: Unique dot air line quick connect fittings nylon tubing kit: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
  • 【Typical Application】: The push-to-connect fitting 1/4 inch are suitable for PU / PA / PE / PVC. The dot air fittings assortment can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
  • 【Easy to install】: Our air fitting kit quicks....
Check Stock

Uniweld UEK1 Hydraulic Swage Tool Kit

  • Kit includes: 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1-1/8″ O.D. Expander Heads, Inside/Outside Deburring Tool and Carrying Case with Storage Compartments..
  • Hydraulic power to easily make precision swages from 3/8″ to 1-5/8″ O.D. on soft tubing including copper, brass, aluminum and steel. Expander Heads 1-3/8″ and 1-5/8″ O.D. Sold Separately..
  • Compact pistol grip design able to work in tight spaces and the hydraulic lever mechanism and release button allow for quick and easy one-handed swage..
  • All tubing must be soft or fully annealed to prevent cracking, see product video on how to properly anneal tubing..
  • Save time and money by eliminating fittings, soldering joints, re-round deformed tubes and fittings for precision fit..
Check Stock

100 PCS 3/4 Inch PEX Cinch Clamps, 304 Stainless Steel PEX Fitting Clamps Pinch Clamps Ring Crimp Rings for PEX Tubing Pipe Fitting Connections (Silver -3/4inch(100PCS))

  • ...mperature strength, and mechanical properties. PEX barb fitting is an easy to install, low cost solution to connect PEX tubing. Compatible with All PEX Brands Manufactured with American Certification..
  • ✔【360-DEGREE SEAL PROTECTION】These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. The 360-degree narrow stepless clamp concentrates seal compression, rest secure in any PEX pipe using the system..
  • ✔【SPECIAL DESIGN】Special design for all PEX pipe connection fittings, Interlock Rings with 360 Stepless Design. This stepless ear clamp conforms to the ASTM International F2098 standard for securing PEX tubing to insert fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • ✔【WIDE APPLICATION】Widely used in all plumbing systems, such as water heater, air condition system, pipeline system, hydronic heating system, electrical plumbing, etc. PEX barb fittings are compatible for potable water distribution and hydronic heating applications. Providing a strong and reliable crimp fitting application..
  • ✔【EASY INSTALLATION】Pex clamp rings slide the 3/4 in. clamp ring over the pipe, push the pipe onto the fitting and squeeze with your clamp tool t....
Check Stock

One Stop Outdoor USA Made - 1/4-Inch x Irrigation/Hydroponics Dripline with 6-Inch Emitter Spacing (Brown) (500' Foot Roll)

  • DURABLE: Resistant to chemicals and fertilizers commonly used in landscaping.
  • EASTY TO USE: Flexible tubing for easy installation - Attach to 1/2" Drip tubing with 1/4" barbed fittings.
  • OPERATING PRESSURE (PREVENT LEAKS & BLOWOUTS): 10-25 PSI (Minimum of 150 mesh filtration).
  • EMITTERS: Flow regulated, self flushing inline emitters deliver equal flow at a wide range of operating pressures.
Check Stock

mistcooling Outdoor Misting System Kit-125ft-30Nozzles Cooling Kit-125, 125 Ft-30 Nozzle

  • Tubing: 3/8” OD Flexible PE Tubing, Max burst pressure is 300psi at 75°F, UV Resistant Flexible Tubing, Easy to Cut , Easy to bend. Nozzles: Nickel-plated brass button series, with stainless-steel Orifice, Standard 10/24” thread in, 0.015” OD Orifice, Rust-resistant fixed impeller pin.
  • Fittings: 3/8” OD, Compression Fittings, Beige Color to blend with most patios and backyards, Compression Type Fittings, Leak Proof, Fittings Included – Misting Tees, Misting End Elbow , Coupler, Compression Elbow for Corners , and 3/8 Compression Tees to split the mist line. Garden Hose Adapter:3/8” OD, Fits most Garden Faucets, With Filter, Washer to protect your nozzles..
  • ¾ Inch “Y” Connector – Hose Splitter : Dual shut-off valve controls water flow , Extra large , plastic handles for easy grip and turn , Easy-on swivel connector prevents hose kinks by allowing hose to turn , 2 Way Y Hose Splitter : The garden hose splitter has 2 Way connectors and 2 valves. After using the water splitter, it easily converts 1 spigot into 2 high flow water sources. It can make your garden life easier..
Check Stock

One Stop Outdoor USA Made - Irrigation Drip Line Emitter Tubing 100', 12" Emitter Spacing, 1/4" .52 GPH, Color Black (.170 ID x 240 OD)

  • Resistant to chemicals and fertilizers commonly used in landscaping.
  • Flow regulated, self flushing inline emitters deliver equal flow at a wide range of operating pressures.
  • Attach to 1/2" Drip tubing with 1/4" barbed fittings.
Check Stock

SharkBite 1-1/4 to 2 Inch PEX Crimp Tool, 24675

  • ...imp Tool Kit works with 4 sizes of PEX tubing - 3/8-in., 1/2-in., 3/4-in., 1-in. (The tool itself) and includes a Decrimping Tool (for crimp ring removal) -all in a compact and durable carrying case. Compatible with all types of PEX copper crimp rings and crimp style PEX fittings.
  • Compatibility:Copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands).Brass or Poly(PPSU) crimp style PEX fittings (F1807/F877 or F2159 standards respectively).All types and brands of PEX tubing - Everhot, Viega, Nibco, Watts, Zurn, etc..
  • Users Manual Included: Contains information on how to make a crimp connection, check connections with Go-No-Go gauge and calibrate the tool.
  • Crimp Ring Removal Tool: Allows PEX fittings to be used more than once. It is designed to remove copper crimp rings with gentle action that will not damage fittings. The easy dial setting adjusts for crimp ring sizes. Compatible with brass and PPSU fittings.
  • Calibration & Inspection: Tool calibrations are made easy with adjustable lock screws. The Crimp/Clamp Tools must be checked for correct adjustment at....
Check Stock

50 Pcs Drip Irrigation Coupling Fittings 1/4 Drip Irrigation Tubing Straight Coupling/Single Barbed Connectors for Universal 1/4 Inch Irrigation Tubing

  • ✔【High Quality】: Made of high-impact, high-strength plastic material, Durable, strong, water resistant.
  • ✔【Fits 1/4 inch irrigation hose】: This irrigation straight coupling connectors connect two sections of any brand 1/4" drip irrigation tubing in a straight line. Two barbed ends makes the connection more strong and firm. Kindly Note:Please check the size carefully before purchasing..
  • ✔【Easy to Install】: This coupling fittings for 1/4 inch irrigation tubing is easy to be installed without glue, tools, or clamps. Push the tubing firmly over the tee fitting.Tips:Put the tubing end into 75°~80° hot water for 30 seconds before pushing them..
  • ✔【Wide Application】:This drip irrigation single barbed connector for 1/4 inch irrigation tubing helps to build a maintenance-free irrigation system, it is ideal to be applied for garden, greenhouse, flower bed, patio and other agricultural watering system..
  • ✔【 Package Included】: 50 pieces of 1/4 inch barbed straight coupling fittings connectors are included in..
Check Stock

(100' ft Roll) - USA Made - 1/4-Inch x Irrigation/Hydroponics Dripline with 6-Inch Emitter Spacing (Brown) (100' Foot Roll)

  • FIT: Use With 1/4" Fittings - 6 inches pre-inserted emitter spacing, 1/2 GPH flow rate from each emitter, 100 feet Length.
  • DURABLE: Resistant to chemicals and fertilizers commonly used in landscaping.
  • EASTY TO USE: Flexible tubing for easy installation - Attach to 1/2" Drip tubing with 1/4" barbed fittings.
  • OPERATING PRESSURE (PREVENT LEAKS & BLOWOUTS): 10-25 PSI (Minimum of 150 mesh filtration).
  • EMITTERS: Flow regulated, self flushing inline emitters deliver equal flow at a wide range of operating pressures.
Check Stock