Top Tubing Reamer

MATEWORK Pipe Cutter - Fast Tubing Cutter Set with Mini Cutter & Deburring Tool Pipe Cutter Tool for Cutting 3/16 to 2 Aluminum Copper PVC Stainless Steel Tube for Plumber and Home Working 3PCS

  • 【Perfect Set】The set includes a heavy duty tube cutter, mini tubing cutter and an inner-outer reamer. It can not only meet your pipe cutting need, but also fast clean inner reaming and outer deburring needs. The pipe cutting tool is very suitable for cutting pipes of aluminum, copper, PVC, thin stainless steel tube..
  • 【Exquisite Craftsmanship】MATEWORK professional heavy duty pipe cutter is made of high-quality aluminum alloy & SKD steel with high hardness up to HRC52. It has 6 pieces of individual bearings allowing for increasing cutting speed. Precise rolling control makes every cut smoother and more accurate in pipe cutting. After many tests, the cutting capacity up to 3/16 to 2-inch outside diameter with the thickness of 1/6-inch..
  • 【Meet Your Needs At Any Time】Mini tubing cutter is Specially designed for small diameter tubes in confined spaces, cut through 1/8 to 7/8-inch outside diameter pipes with a maximum thickness of 1/10-inch especially for use in restricted areas where a complete turn is not possible, improve your work efficiency..
  • 【Deburring Tool】Pipe reamer has 3/16 to 1-5/16 inch outside diameter capacity. It can be quickly, cleanly and conveniently applied to the inner diameters of copper, aluminum, PVC and soft ste....
Check Stock

RIDGID 31632 Model 151 Quick-Acting Tubing Cutter with 1/4 -1-5/8 Cutting Capacity Silver Black

  • QUICK ACTING TUBING CUTTER: Cuts through 1/4 inch to 1-5/8 inch copper, brass, aluminum, and plastic tubing with superior ease and efficiency.
  • X-CEL KNOB: Features a large and ergonomic design that assures a firm grip for easier cutting and better comfort.
  • I-BEAM CONSTRUCTION: Sturdy design and reinforced surfaces offer reliable durability and long-lasting service.
  • X-CEL WHEEL PIN: Enables quick, tool-free cutter wheel changes in seconds, with no lost clips..
  • FOLD AWAY REAMER: Conveniently stored in the frame, lets you clean and prep freshly cut tubing to ensure good connections.
Check Stock

Mastercool 71600-A Blue Hydra-Swage Tube Expander Kit,Black

  • DO NOT ACCEPT IMITATIONS: This is the original Hydra-Swage.
  • FABRICATES AND EXPANDS: Copper, aluminum and soft steel tubing using hydraulic power.
  • HAND-HELD HYDAULIC PUMP: Create perfect swages on the job while generating the power necessary to expand tubing up to 1 1/8”.
  • ENHANCE A QUALITY JOB: Eliminates couplings, reduces brazing and number of joints.
  • COMPLETE KIT: Consists of expander heads 3/8, ½, 5/8, ¾, 7/8, 1 and 1 1/8”, hydra-swage, adapter and inner-outer reamer.
Check Stock

Husky 2 in.PVC, CPVC, PP, PEX and PE piping Ratcheting PVC Cutter with quick change blade mechanism

  • Clean, square cuts are easily made on copper, brass, and aluminum tubing and thin-wall conduit.
  • Quick-adjust feature provides the user with fast cutting speeds.
Check Stock

uxcell Flaring Tools Set Hydraulic Tube Flare Kit 45 Degree Eccentric Cone Head

  • FLARING RANGE - (Including Inch and Metric Die) Inch: 1/4-inch to 3/4-inch(1/4-inch, 5/16-inch, 3/8-inch, 1/2-inch, 5/8-inch, 3/4-inch).
  • CLUTCH FUNCTION - The clutch in the handle limits over-tighten the flare..
  • ECCENTRIC CONE HEAD - 45 Degree Eccentric Head producing 45 Degree flares in soft copper, brass and aluminum tubing..
  • CONVENIENT - A single clamp screw provides for east clamping and removal of tubing. Package also contains a reamer and a tube cutter for your....
  • EASY STORAGE - Plastic carrying case for neat storage..
Check Stock

Sutekus Brake Line Flare Tool Double Flaring Tool Kit Single Flares for Automotive Brake Line Replacement Brake Repair

  • Kit includes flare bar x 1, flaring cone x 1, flare adapters x 7, tubing cutter x 1, carrying case x 1..
  • Flaring adapters size: 3/16”, 1/4”, 5/16”, 3/8", 7/16", 1/2", 5/8".
  • Tubing cutter has a 1/8" to 1-1/8" capacity with inner outer reamer..
  • Carrying case is included for quick organization and easy transportation..
  • Perfect for bending most soft steel, aluminum, brass and copper pipes etc..
Check Stock

Capri Tools Telescopic Tube Cutter, 1/8-1-3/8 in.

  • The Telescopic Tube Cutter lets you easily make clean and precise tubing cuts on hard and soft copper, aluminum, brass, thin-walled steel, and plastic tubing in 1/8 to 1-3/8 in. outer diameter.
  • Heavy-duty ergonomic tightening knob with ultra-smooth turns gives you maximum control of cutting pressure. Precision four-roller set helps make precise cuts easy. Rollers also have flare grooves for close-to-flare cutting.
  • Fast, tool-free blade replacement: release or secure the detent wheel pin with a simple push.
  • Built-in retractable reamer deburring tool with replaceable blade.
  • Comes with a high carbon steel cutting wheel for making clean and precise cuts.
Check Stock

RIDGID 32910 Model 10 Screw Feed Tubing Cutter, 1/8-inch to 1-inch Tube Cutter,Silver/Black,Small

  • Easily makes clean, square cuts on copper, brass, aluminum and thin-wall steel.
  • Large, ergonomic X-CEL knob provides a firm grip so you can cut tubing quickly and easily.
  • Features a convenient fold-away reamer to clean and insure a better connection.
  • Tubing cutter has a 1/8-inch to 1-inch (3 mm to 25 mm) cutting capacity.
  • RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.
Check Stock

RIDGID 31642 Model 152 Quick-Acting Tubing Cutter, 1/4-inch to 2-5/8-inch Tube Cutter

  • X-CEL knob for cutting tubing more quickly and easily with a larger, more ergonomic design.
  • Quick-acting design, I-beam construction and hardened wear surfaces for superior durability. Thrust-bearing slide assemblies for smooth operation.
  • Features a convenient fold-away reamer to clean and insure a better connection.
  • X-CEL wheel pin with ball detent designs allows you to change the cutter wheel quickly with no tool needed and no lost clips.
  • Tubing cutter has a 1/4-inch to 2-5/8-inch (6 mm to 66 mm) cutting capacity.
Check Stock

B BOSI TOOLS Tubing Cutter, 3/16 to 1-3/8 inch Outer Diameter Heavy Duty Pipe Cutter of Aluminum, Copper, PVC, Thin Stainless Steel Tube

  • 【Large Cutting Capacity】This tubing cutter quickly and easily cuts 3/16" to 1-3/8" copper, brass, aluminum and plastic tubing, precision designed and constructed with thrust bearing feed for smooth cutting action. Each tool is tested to ensure accurate spiral free cutting..
  • 【Clean & Precise Cut】B BOSI TOOLS professional copper pipe cutter set has 6 pieces of individual bearings allowing for increased cutting speed. Precise rolling control makes every cut smoother and more accurate in pipe cutting..
  • 【Easy to Use】Slide the cutting wheel feed mechanism into place, line up the cutting wheel with the cut line and tighten handle, rotate cutter around tube, tighten knob every few turns until wheel cuts through, use reamer to smooth the edges of the cut..
  • 【Widely Application】This convenient tubing cutter combo is a must-have for any toolbox. Ideal for refrigeration and plumbing programs. The cutter allows you to easily cut metallic tubing with a simple one-handed operation..
  • 【Durability & Practicality】Heat treated alloy steel cutting wheel and high-grade steel construction make our heavy-duty copper tubing cutters perfect for plumbing, electrical, air conditioner installation, automotive, and DIY applications..
Check Stock

Performance Tool W82005 Self Tensioning Tubing Cutter

  • Cuts copper, brass, aluminum, plastic and PVC tubing.
  • Super strong internal spring keep constant cutting pressure.
  • Grooved guide roller ensures square cuts.
Check Stock

RIDGID - CC247 RIDGID 40617 Model 101 Close Quarters Tubing Cutter, 1/4-inch to 1-1/8-inch Tube Cutter Silver & 32920 Model 15 Screw Feed Tubing Cutter, 3/16-inch to 1-1/8-inch Tube Cutter

  • Product 1: Designed for use in restricted spaces on small diameter hard and soft copper, aluminum, brass and plastic tubing.
  • Product 1: Strong, lightweight slide and wheel housing and large knurled feed screw knob ensure easy control of cutting pressure for clean cuts.
  • Product 1: Rollers include grooves for close-to-flare cuts.
  • Product 1: Tubing cutter has a 1/4-inch to 1-1/8-inch (6 mm to 28 mm) cutting capacity.
  • Product 2: Easily executes clean, square cuts on copper, brass, aluminum and thin-wall steel.
  • Product 2: Large, ergonomic X-CEL knob provides a firm grip so you can cut tubing quickly and easily.
  • Product 2: Features a convenient fold-away reamer to clean and insure a better connection.
  • Product 2: Tubing cutter has a 3/16-inch to 1-1/8-inch (5 mm to 28 mm) cutting capacity.
Check Stock